Honda Civic EM2 Coupe | HID Bi-xenon Projector Retrofit (blackout) DIY installation

Honda Civic EM2 Coupe Bi-xenon projector retrofit installation video. Projectors used are the Mini D2S 3.0's. These fit directly in the H4 halogen headlight housings.
𝗬𝗼𝘂 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘁𝗵𝗶𝘀 𝗴𝗿𝗲𝗮𝘁 𝘂𝗽𝗴𝗿𝗮𝗱𝗲 𝗸𝗶𝘁 𝗵𝗲𝗿𝗲:
retrofitlab.co...
𝗜𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻𝘀:
0:05 Heat the headlight to soften the sealant
0:28 Remove the bulb cap and place the projector in the fitting
0:40 If necessary adjust the rubber ring to make the projector's beam high enough
1:25 Place the shroud to see if any cutting is necessary
1:40 Cut the shroud with a dremel
2:09 Sand the shroud to make it ready for painting if necessary
2:15 Clean it before painting
2:35 Like the shroud, Scotch brite is used for sanding lightly before painting the reflector
2:50 First paint it with a layer of plastic primer
3:10 Remove orange insert if wanted
3:40 Paint black after plastic primer has dried up
4:00 Mount the insert back in the lens
4:20 Mount the projector
4:38 Place the shroud on the projector
4:50 Make sure the projector nut is tightened
5:00 Clean the lens from fingerprints
5:12 Place the lens back on the housing, heat the headlight again and press the lens back on.
𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗕𝗶-𝘅𝗲𝗻𝗼𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁𝗼𝗿 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁:
• Much better light output
• Double high beam (xenon + halogen)
• No glare
• Lower energy consumption (35 watt instead of 55 watt)
• Luxury OEM look
𝗖𝗵𝗲𝗰𝗸 𝗼𝘂𝘁 𝗼𝘂𝗿 𝗻𝗲𝘄 𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸 𝗴𝗿𝗼𝘂𝗽:
/ europeanheadlightcommu...
𝗙𝗶𝗻𝗱 𝘂𝘀 𝗼𝗻:
Facebook: / retrofitlab
Messenger: www.m.me/Retro...
Instagram: / retrofitlab.com_official
Our website: www.retrofitla...
#Honda #Civic #HondaCivicEM2 #Model #Aharon #Retrofit #DIY #Upgrade #Headlight #lighting #HID
#Retrofit #LED #custom #improvement
𝗢𝘂𝗿 𝗦𝘁𝗼𝗿𝘆:
Retrofitting refers to the addition of new technology or features to older systems. These days there are a lot of people who put a simple plug & play xenon kit in their halogen headlight housing in an attempt to improve night vision and looks of their vehicle. In fact they don’t realize that their headlight beams are often worse than before. Night vision achieves relatively little improvement on night vision because of a poor beam pattern, which increases the blinding of other road users. This is because their headlight housings are designed for halogen and not xenon.
A true Bi-Xenon projector update is now possible for your car. Such an upgrade will significantly improve your light output from 700-2100 lumens to 2800 and 3500 lumens, without blinding other traffic with glare from your headlight. Upgrade your headlight OEM style!
The latest high power Led bulbs will upgrade both the exterior and interior lighting system of your car. Led lighting is becoming more and more popular in the automotive market for obvious reasons. They have longer lifetime, use less energy and improve safety with their fast response time.
Do you have any questions? Do not hesitate to contact us, we are happy to help you out!
Good luck with your retrofit!
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.

[@etakishinji7266]

One of the best videos yet. No background annoying music. Just the sound of work and progress. Pls do more videos. *Subscribed

[@Retrofitlab]

Thanks :-) (and sorry, sometimes we do use background music :-))

[@kalei43]

Mind blown on your set up to bake them in, I’m definitely going to have to try that

[@Retrofitlab]

Not the prettiest but if it works it works :-). We also made a video of how to make one yourself kzbin.info/www/bejne/qGinaZebrcSGp8k

[@kalei43]

Retrofitlab.com thanks for the link that’s awesome.

[@Retrofitlab]

@@kalei43 Good luck and be careful :-)

[@Rone8Eleven]

​@Retrofitlab.com I wanted to thank because I learned so much from your videos. A few months ago I did a Morimoto d2s 5.0 retrofit on my 2017 Honda Civic Si and it came out amazing. Baking the headlights in a box was very helpful to me. :)

[@Retrofitlab]

Good to hear :-)

[@crm4667]

good to know i got these same projectors and my housing is the same size as that civics good thing i have a dremel too to make it fit😂 now i just need to make a box like the one you made

[@maynardduldulao38]

What wss the size ofyour projector

[@HTrntrs]

I wanted u to black out the headlight & u actually did 😘😘😘

[@adeelshahzad8644]

Did u find any vdo for black out??

[@HTrntrs]

Adeel Shahzad Bohaut sari hain KZbin pe

[@zaycowuidmatamoros6016]

Me gusta el metodo que usas para calentar el foco exelente todo el trabajo

[@Retrofitlab]

gracias :)

[@cameronsmith1149]

please do this on a set of 04-05 civic headlights, i and i’m sure others would be happy to see one

[@Retrofitlab]

Maybe in the future :-)

[@Rone8Eleven]

Its the same exact thing for 04-05

[@Retrofitlab]

@@Rone8Eleven Nice!

[@xtoorgaming3982]

savage! no PPE was involved on this build lmao

[@javedakhtarup79ansari15]

Nice wark..

[@Retrofitlab]

Thanks!

[@tomaslozano6486]

nice work

[@Retrofitlab]

Thank you 🙏

[@a121391]

esos videos para autistas que no hablan como son mis favoritos, dejan todo a la imaginacion sobretodo para alguien que no sabe nada del tema y quiere aprender

[@adriang7242]

any video of wireing them and how they look on?

[@michaeldeakin5774]

Hi guys, i have a honda using h4 fitment, what bulbs should i use and how do i wire it up for the hi/low function. Excellent vid btw, love the look.

[@Retrofitlab]

We would recommend to use a bi-xenon or b-led projector instead of plug and play xenon or led bulbs.. :) for example the Aharon optimus TR. For the H4 bi-xenon function on a projector we have H4 cables with outputs to the ballasts and projector for hi/low www.retrofitlab.com/en/aharon-optimus-tr-bi-xenon-projectors-1.html

[@TheCarista]

What about the wireing? Can you show us that/explain?

[@ramikramikov802]

Классно!!!!!!сделай пожалуйста на Chrysler Pacifica

[@Sk8f8619]

Very good detailed video! Subscribed for forsure now!

[@davidgirga13]

Hi Retrofitlab, random question but what size is that box you use to heat the headlights in? Great work by the way you make it seem to easy.

[@DannyKhoo89]

You guys are crazy! Spraying without a glove or even taking off your watch? Haha

[@DannyKhoo89]

***** Keep up the good work! Would love to see the headlights on the car

[@santossagastegui7167]

Solo haces modificaciones a autos del 2005 hacia arriba , qué opinas de modificar las luces de autos antiguos y darle otra vista Por ejemplo los Toyota ,Nissan , etc

[@cesarmunoz9777]

Very good but ,can you explain about the box and heatgun in some video is very interesting?

[@Retrofitlab]

Hi, the box is used an oven to heat the headlight. A large cardboard box is used where hot air is blown through a heatgun. Make sure that the hot air of the heatgun does not blow directly to the headlight, place the headlight on small elevations so that the air can circulate properly through the box. We use a setting of 300 Degrees Celsius for 12-18 minutes / 1st lowest setting, depending on the size of the headlight.

[@cesarmunoz9777]

@@Retrofitlab ok thanks i need practice this in my headlights, congratulations very nice work,see you in the next video

[@TherealWinterpillow]

Stick the housing in the oven at like 250 for about 7 minutes will have the same results. Just be sure you put the headlight on a couple 2x4s and make sure it’s in the center of the oven.

[@davidrojas1528]

excellent video you could do it with the headlights of the toyota yaris 2001 sedan

[@Retrofitlab]

Thanks!! :) Maybe later, will keep it in mind!

[@adrianorodrigues1399]

Faz no farol do GM Agile

[@fatih34balci]

so nice awesome

[@Retrofitlab]

Thanks! :-)

[@caaco2022]

Nice

[@Retrofitlab]

Thanks :-)!

[@antonibanus5591]

nice!

[@Retrofitlab]

Thanks :-)

[@leemichaelhawkes]

Hi there, I take it the projector uses a h1 bulb, which is single filament for headlamp only, so where's the main beam? Or does the projector take a h4 or h7?

[@vioxxx25]

Omg!!! Nice work!!

[@saitsaatcigil9830]

My Friend, How are you? Do we paint the inside of the headlight with heat resistant paint? For example, we will paint it black! How is it normally done? Can you please explain? Thanks

[@Retrofitlab]

Usually it can be done with normal paint from a spray can. But you can also use heat resistant paint, this usually has a nice flat finish. The pro's also use automotive grade 2k spray spaint.

[@0zakaMarek0]

Nice guide guys, well done. What would you recommend to fit into Honda Civic VIII gen (2007)?

[@0zakaMarek0]

TA!

[@LuisLopezz]

My car have the big holes for the h4 bulbs like this Civic, could I use the Morimoto H1 or only Mini D2S??? HELP!

[@sameterdogan2748]

Gerçekten 10 numara işçilik tebrikler

[@brady1465]

does the factory alignment for headlights unit still work when the lights are retrofit with projectors? and if not, how did you align them

[@63ch31]

It can be adjusted like before. That's the entire reason for mounting it in the existing reflector.

[@user-cd2ft1xr4c]

День добрый а можно как то больше изменений с данной моделью авто

[@Retrofitlab]

Sorry English maybe? Google translate can't make much of it :)

[@jefte8jas]

Como se llama la herramienta que utiliza para cortar?

[@Retrofitlab]

Para la 'shroud' utilizamos una 'herramienta giratoria / rotary tool / dremel'

[@catalinpetre2425]

Centering rings are helping with something ? How adjust the projector ? Thanks and sorry for my english !

[@catalinpetre2425]

But for 2.5 inch are necessary ?

[@juanperla3155]

Does the 3.0 will fit on the Em1 headlights?? And what size of bulb fit the 3.0? Thanks.

[@oOalvaradoOo]

So where can I learn to wire all the high beams stuff?

[@fredtorresp]

Hi there thanks for the video I'm very interested, I read in the comments that it comes with a h4 adapter so it's plug and play but what about the ballast?

[@ronniecason9807]

i have a 97 civic that im looking to retrofit seeing as how i have to get new headlights for it to pass inspection what kit would you recommend for my car and i live in the US thanks in advance

[@MATRIX-my6md]

Can you pease tell how repair bi xenon hid projecter dim and bright cap problem and how to fix that

[@abdulrahmansaleh3391]

thanks, easy work ... may I know what type of sprays you used (color) coz not all colors give good look. tq

[@abdulrahmansaleh3391]

great brother, thanks. what about the blub what type can be fixed .. I bought this bulb www.lazada.com.my/2x-led-h49003-headlight-lighting-16000lm-160w-conversion-bulb-beam6000k-ld912 17248395.html?Orderconfirmation&Email&LineItem if that bulb cant then should be this bulb? www.lazada.com.my/80w-cree-led-h8-bulb-angel-eye-halo-light-for-bmw-e90-e92-e82-e60e70-x5-e71-e89-8974544.html?mp=1 sorry I am not sure the links will work or no :)

[@nelsonfernandezcatalan7241]

Like si viste que se le olvido la mica transparente naranja que le daba una mejor estética

[@rami5004]

No me gustó la apariencia, todo negro

[@dracko2976]

Lo mas seguro es que usara bombillas leds blancas en las luces direccionales y no quiere amarillo.

[@209golightly]

could i but theese and take a part and paint and tint the reflector and led? what did you use to take off the crome and paint

[@danhaines]

What is the spray you paint the chrome parts with before using black spray paint?

[@Retrofitlab]

We used a primer first :)

[@CrimsonHawk09]

2 questions. Can you adjust the projectors once installed? Im doing this to a truck in the future and it will be epoxied in unlike your video which is screwed on. Are there little adjusters on the projector itself?

[@CrimsonHawk09]

+Retrofitlab well its gonna suck having to epoxy the projector right the first time. I have to trim the back a bit since it wont screw like yours. i found the how to nut didn't mention adjustment.

[@KawasakiZ-yd5fq]

can you make a video how to connect the harness?

[@daskapil]

very detailed, Love it, I was just looking for this only. Thanks Brother

[@palwindersingh7268]

Can u plz tell me how i can connect wired of my light. My light have a three wires ?

[@carlosalvarez9762]

What Black paint do you use on these? @Retrofitlab

[@GerardoGarcia-rs9bq]

Can u plz do a vid how to wire them in

[@DiogoDC123]

its literally plug and play with the morimoto kit

[@khaled6100]

I think i'm in love :)

[@khaled6100]

I'm straight lol . but its a very good look :)

[@michaelpeters3343]

Hello, after alot of research I heard I need a projector and to retrofit unless I want to blind everyone, and I dont want that! What size projector would fit a 2003 honda civic ex?

[@dato8049]

what type of glue is used to seal the lighthouse?

[@cave1976]

Try with a Sonata LF 2015

[@Retrofitlab]

Maybe in the future.. Keep posted to out channel :)

[@koushick007]

@retrofitlab do you guys have any kit for 2011 scion xd?

[@joetoscano5106]

Do you guys have shrouds with halo lights? If so which ones?

[@josephtiong5649]

any idea how to dismantle tail light lens??

[@Dahveeddude]

I got quoted for a D2S 4.0 , halos, painting the housing and the harness/install done for $800 on a 2007 Honda Ridgeline. Would you say that price is pretty steep or justified? I understand as a business you want to make twice the materials cost but it still seems like a lot.

[@CarlitosBXNY]

David Cardenas That’s definitely a lot, how much were the parts?

[@OO7RX7]

Can you please do a s70 head light convertion

[@Retrofitlab]

Perhaps in the future :) Please stay tuned to our KZbin channel!

[@lujus3854]

Hello how are you asked if you have done any optics of a Ford Focus mk3 model 2017 and up

[@Retrofitlab]

Sorry we did not perform this retrofit yet..

[@ianjuarez30]

Does the shrouds don’t fit without trimming it?

[@Retrofitlab]

No they won't. You need to trim them in order to make them fit.

[@arbergashi5194]

Retrofitlab can you make a video for Fiat Stilo plz

[@hamzarashid9276]

At what temperature you heated the light and by using what

[@Retrofitlab]

In general, 2 methods are used, with both methods, be careful and patient. Method 1 is using a regular oven. Preheat the oven at 200 degrees Celsius. When ready, switch off the oven and place the headlight inside. Make sure that the headlight is not touching any metal of the oven by placing a cloth over the grid, for example. Leave the headlight in the oven for 10-15 minutes before opening it. If the headlight kit is not yet soft enough, put the headlight in the oven for a bit more time. Method 2 is suitable for larger headlights that do not fit in a regular oven, or if your lovely wife absolutely does not allow car parts to be baked in her kitchen. A large cardboard box is used where hot air is blown through a heatgun. Make sure that the hot air of the heatgun does not blow directly to the headlight, place the headlight on small elevations so that the air can circulate properly through the box. We use a setting of 300 Degrees Celsius for 12-18 minutes / 1st lowest setting, depending on the size of the headlight.

[@victorraulgalleguilloscarq7983]

Me gustaría saber cómo haces la conexión para h4, para que quede funcionado cuando se hace el cambio de luz

[@Retrofitlab]

The best way is to connect the ballast with this cable: www.retrofitlab.com/en/wires/h4-diode-1.html

[@geo1mz]

can you guys retrofit gen 1.5 toyota solara Retrofitlab.com

[@markbanuelos4420]

Can one just buy these off of a website or something?

[@alternativekeepout]

You didn't show how to aim the lights before put the housing and cristal back together, the cut off line should be perfectly horizontal don't you thing so?

[@alternativekeepout]

Ok now imma make mines ;-) thank you for the video

[@omarsaleh4160]

how much it coast to do it if i bring my car to you i have civic ?

[@zodiactrip]

How you know from which side is the projectors left and right?

[@Retrofitlab]

The projectors are identical, there is no left or right side :)

[@954Brad]

what shroud is being used here?

[@FARGA77]

have you tried this with the original (oem) headlights? it should be the same process right?

[@FARGA77]

Do I have to change the 9006 bulbs to h4?

[@Awall440]

so where does the solenoid plug into?

[@ivanjo6478]

hey buddy, what's the stock bulb type fitment? I see that most projector uses H4/H7 adapter before screwing the projector into place, what if the bulb type is not H4 or H7? Mine is H11.

[@ivanjo6478]

Retrofitlab thanks for replying so quickly. is it because the bolt thread is not long enough to be out from the housing? or the diameter is not big enough?

[@XplosiveFuZioNHD]

Can you retro fit Acura Rsx lights? With S2000 projectors?

[@Anjooo.86]

You guys have any for the 2004 civics?

[@carloshere6909]

can you use 2.5. mini set on 1998 civic

[@eddienakamura4334]

what type of projector did you use for this em2 headlight assembly

[@user-bz6uf7wr2w]

This is Koito Q5 projectors. Like mine.

[@foxideart292]

do you guys ship international ?

[@alexandreandrade7104]

Muito bom!

[@Retrofitlab]

Thank you very much :)

[@vicmar858]

What materials aside from the box do you need to make that box?

[@vicmar858]

Hate to bother you again, I wanna know what cylindrical item did you use where you placed the heat gun? And what items did you use to hold the headlight in place inside the box? I saw previous comments where you’re emailing people about how to make the box can I get those instructions too? Highly appreciated thanks :)

[@vicmar858]

Thanks a lot 👍🏻, love your videos btw.

[@santhoshkrishna7122]

Ford ikon 1.3 flair how to install

[@dudenli]

i have nissan rogue headlight has leds around the side. is it ok to heat the lens. does it get damage during heating process?

[@Retrofitlabcom]

It is ok.. Just don't heat them for too long :)

[@dudenli]

thank you

[@adriang7242]

i have a em2 do you guys sell the kits?

[@dudenli]

i am planing my nissan rogue 2018 model. have you done any what size should fit? thank you

[@maynardduldulao38]

Wat is the size of your projector assembly 2.5 or 3.0

[@azkabolang]

Hi it is 2.5 projector

[@maynardduldulao38]

Is 3.0 fit in thjs

[@berkeerdener8795]

What is the name of your lens?

[@slimhonda6352]

is this compatible with l.e.d bulbs? or do you have to fit them as well?

[@Retrofitlab]

We don't advise to use LED bulbs in the projector because light output and pattern is usually quite bad. Examples here; www.retrofitlab.com/blog/h1-led-versus-xenon-mini-h1-projector/

[@RMarimat]

Can I use just a normal hair dryer?

[@RMarimat]

+Retrofitlab okay thanks! Nice vid btw

[@Ozuma99]

Does the blackening have any effect on the projected light?

[@Retrofitlab]

For low and high beam it won't, because the Aharon bi-xenon projector is used and the reflector part isn't used to reflect the light anymore.

[@Ozuma99]

Thank you for the reply. I thought so but I wasn’t sure. You cleared all my doubts. Thank you.

[@alvinrodriguez939]

What brand of sealant did u used ?thanks.im from philippines😊

[@Retrofitlab]

Please see this link: www.retrofitlab.com/en/accessories/butyl-rubber-sealant.html

[@oprashanth]

Where is the performance of the lights on road?

[@Retrofitlab]

We do not have a result picture of this, sorry!

[@xJinzoh]

Where can I get the rubber ring??

[@Retrofitlab]

From a retrofit company, like us, www.retrofitlab.com :-) Please contact us to order.

[@jg-gh7ub]

Hola podrían hacer uno de honda city 2017 :)

[@jg-gh7ub]

Retrofitlab gracias o tienes algun video de uno parecido la verdad quisiera hacerle algo pero no se como :)

[@fahruddinomar4487]

can use to toyota acr30?

[@209golightly]

how much to make me a set?

[@maher11100011]

where test????

[@wilson24p]

how many minutes to heat tha headlight?

[@wilson24p]

thank you for your response, ok i will try that this coming weekend, i have already retrofit ready to install.. 👍👍👍

[@joide_91amjad20]

You forget the orange piece of t-signal 😂

[@Retrofitlab]

😯😶 You are right.. Very perceptive of you.

[@joide_91amjad20]

I’m an electrical of cars😘 never forget these things

[@carsonallen5233]

How does The shroud stay on?

[@carsonallen5233]

And the clips connect to the fixture that is to be mounted correct?

[@209golightly]

i have an 01 civic lx coupe