Hyundai Getz 2006-2009 | Projector HID Bi-Xenon Retrofit installation DIY headlight Upgrade

[@filippvoice]

Hi, there are a couple of questions: - Is it possible to preheat the same in the oven? - You used an old sealant and did not apply a new one? - What type of paint was used for the headlamp? Is it possible to paint with simple enamel? Thanks 😊

[@Retrofitlab]

Hi :) - In general, 2 methods are used, with both methods, be careful and patient. Method 1 is using a regular oven. Preheat the oven at 200 degrees Celsius. When ready, switch off the oven and place the headlight inside. Make sure that the headlight is not touching any metal of the oven by placing a cloth over the grid, for example. Leave the headlight in the oven for 10-15 minutes before opening it. If the headlight kit is not yet soft enough, put the headlight in the oven for a bit more time. Method 2 is suitable for larger headlights that do not fit in a regular oven, or if your lovely wife absolutely does not allow car parts to be baked in her kitchen. A large cardboard box is used where hot air is blown through a heatgun. Make sure that the hot air of the heatgun does not blow directly to the headlight, place the headlight on small elevations so that the air can circulate properly through the box. We use a setting of 300 Degrees Celsius for 12-18 minutes / 1st lowest setting, depending on the size of the headlight. - If the headlight is sealed with butyl, it is not needed to add a new sealant :) - We used a heat resistant paint

[@filippvoice]

@@Retrofitlab Thank you very much for the detailed answer! I also getz, there butyl sealant? Can I not apply a new one? (Im used google translate)

[@millerpolo2028]

Español

[@vanipv522]

Hi tell me how much its cost I'll buy it from it you

[@Retrofitlab]

Nice to hear, but sorry we don't sell complete headlights, only retrofit parts. www.retrofitlab.com/en/hyundai-getz-2002-2011-bi-xenon-md2s-40-halogen-headlights.html

[@salvinodelg9989]

is it the same projector? beginning to end?

[@shedrickchua4320]

hi. i have a problem. car maintenance guy removed the bulb of my retrofitted headlights. when returned it caused discoloration. whats wrong with that

[@BigBoss-qq8wy]

Can you make a headlight for chevrolet aveo?...

[@dannielamir689]

Is it possible to put this lamp on 2003 hyundai getz? Thank You

[@javshah105]

Great and what is the size of the Angel eyes?

[@huiping2363]

Hi, may I know which diameter I should get for the XB-Led angel eyes?

[@emilianodacosta3325]

será possível dizer- me quanto custa um farol ou lâmpada destas

[@stefanosalimatiris5228]

i have a BMW 1 series with halogen headlights and I want to change it with bi xenon headlights..what I have to do? buy new headlights or can I convert the olds with projectors?

[@lazarotmtm3995]

what size is the anjel eyes 80mm work in 3.0 morimoto?

[@omkarkobal829]

Is it available for hyundai i20 2011

[@krakenfelt1]

Does anyone have advice on removing the fluting from glass headlight lenses?

[@leoneldeandrade4322]

Hola ... Dónde puedo adquirir un par de faros para mi getz 2008... O el kit de instalación?

[@Retrofitlab]

Retrofitlab no vende faros completos. Debería poder obtenerlos en línea. Puede obtener nuevos o usados en eBay, por ejemplo.

[@strahinjakyu]

Wereby closing headlights? Gum or something else? :)

[@Gheerishm]

Hello, is the heat gun set to maximum for 10 minutes?

[@davidschembri65]

i live in a country where we drive on the left hand side. Can RHD projectors be mounted on LHD headlights?

[@gatissamins1009]

Gatis Hi. I today got delivery lenses with Iris shrouds, but I want ordered day light rings as well. Can I make order in your site?

[@anirudhaguha9565]

Hello, can u please tell me the xb led size? is it 70mm or 80mm?

[@daniellele9634]

is it just possible to order two headlights form u guys? shipping to norway?

[@apaiputs3925]

What is the size of projector and the ring light?

[@Retrofitlab]

The projector has a 3 inch lens and the angel eye has a diameter of 100mm. We have a new Iris shroud with the angel eye already installed: retrofitlab.com/products/iris-shroud-angel-eye-halo?_pos=3&_sid=26b16f31a&_ss=r We also made a specific kit for the headlight of the Hyundai Getz: retrofitlab.com/collections/hyundai-getz

[@roidroid]

0:33 & 4:23 You keep putting the headlight into a *Buzzing magic cardboard box under your table* for 10mins at a time? Ah i just noticed the box has a *heat-gun* attached to it.

[@Retrofitlab]

:D lol

[@garysteevens6579]

HI, what type of bulb you used for the projectors ?? Does Ebay sell this type of projectors ??

[@elzacatecano5096]

Yes you can find those on ebay lol

[@noormone2883]

السلام عليكم.. محتاج زوج مصابيح امامية لسيارتي هونداي جيتز موديل 2008

[@Retrofitlab]

Sorry, we don't offer these..

[@_1.orhan_]

Lens what brand astra j actinium of lights

[@gvick15]

hello, can you share how to you do the wiring for the new projector lens to the car oem wiring?

[@gvick15]

+Retrofitlab hi thank you for your reply..so do you have a link on where you bought the projector kit..and as for the led ring, you need to splice the car headlamp small bulb wiring right?

[@aliraza-se9sn]

If I want to give u order for thats light can u mke for me ??

[@BlackOWLfly]

Would you make a video for hyundai i30 second generation (from 2013)? Those have halogen projectors and an upgrade would be really nice...

[@Retrofitlab]

Perhaps in the future :) Stay tuned to our channel!

[@MrUnicosasy]

Great video ! Demonstrating good , can you tell me the degree of soundproofing thanks

[@amptec24]

Just watch your video projector bi-xenon HID retrofit installation, do you have the same for Hyundai I10 2016 headlight.

[@terryyouth]

why did you remove that reflectors/ ? @ 1.45 and more at 2.01 if you were going to put it back at 4.07 ??i did miss something. although i wont be doing this stunt

[@terryyouth]

***** oh Ok!! only saw the yellow lens later!!!

[@ugurgul4596]

Size nasıl ulaşabilirim 2004 model Getz var bende böyle bir çalışma yapabilirmiyiz

[@Retrofitlab]

Lütfen bize bir e-posta gönderin [e-mail] veya arabanız için sahip olduğumuz bu kite bir göz atın www.retrofitlab.com/en/hyundai-getz-2002-2011-bi-xenon-md2s-40-halogen-headlights.html

[@RAJUGREWAL]

Please make video for land rover freelander 2..

[@RAJUGREWAL]

How I'll manage few days without headlights.. ;) If you will install projectors in freelander 2 of any of your customer, then please make video and upload,, .. Thanks..

[@javshah105]

How did u fixed the shroud on the projector lens? Did you apply glue or something?

[@javshah105]

Thanks bro may I know the name of the video or the link of the video which u r asking me to see. Anyways great work and I have learned a lot from you... :)

[@ttonyzyh302]

Is it work on 2015 Hyundai accent ?? if it is, which wire should I connect to the wire of angel eyes?

[@Retrofitlab]

Not sure, cause we do not have any info about this headlight.. sorry!

[@mulaloraedani1798]

can i get this fully customized headlights anywhere for opel corsa 2007 1.4 pick-up

[@Retrofitlab]

Sorry, we don't do retrofits anymore

[@gvnnymont]

Hi my friend i need you help. can u help me? i have a hyundai getz,

[@fththkll4979]

thanks for sharing and explaining with all details. i wanna ask what type of bulbs used with tihs setup? I guess not a xenon bulb and ballast. Maybe a H7 type LED bulb with 360 degree lightning. Actually i wanna learn how is the performance of LED bulbs with these projectors. If enough for low beam on the road but not much high beam range maybe we can try. I believe HID is the best but i want to know how is the LED performance? Thanks for all.

[@Retrofitlab]

Actually it is a xenon bulb and ballast. Led bulbs they don't have good performance in general. We've tested a LOT of Led bulbs, and the only thing good about those bulbs in general are the marketing terms, not their performance ;-)

[@fththkll4979]

Thanks for the detailed answer. I read too much descriptions like yours. In mid-range headlight technology xenon HID systems are the best i guess.

[@907pinoyboi]

what other shrouds would work and fit the mini D2S projector?

[@907pinoyboi]

well i got the gatlin gun shroud but that one doesnt fit unless modify it i was just wondering which ones would work perfectly with the mini d2s 3.0 in a dodge ram 1500 oem headlight housing

[@julzchar1055]

Good Job 👍👌👏

[@Retrofitlab]

Thank you! Appreciate it:)

[@dilmar4033]

Did you do Mitsubishi Pajero Full generation 3 retrofit lights? I'm looking for it.

[@Retrofitlab]

No, sorry

[@luckymacdonaldluckymacdona4805]

Where are you located

[@Retrofitlab]

In The Netherlands

[@gjorba9467]

Hi, first of all thank you for this video. I'm installing one of it but i have a problem. I was trying to install led bulbs, so the led bulb only have +/- and my car h4. How can I conect the bulb and projector to the h4 car conector? Thnk you so much

[@gjorba9467]

Retrofitlab Thank you, i missed to tell that the bulbs are d2s type, so only have positive and negative conector. My car is h4, so I supose the third conector (hight been) must be conected with the projector's conector, but i don't know how to do it.

[@fththkll4979]

@@gjorba9467 You have two options: easy way is to find this connector; www.dhgate.com/store/product/hid-h4-hi-lo-bike-motorcycle-car-relay-bi/213537176.html This transforms H4 to H7 type with high beam connector. But xenon ballast wattage should be harmful for the car control center, better for using LED type bulbs. Second way to use a H4 harness cable. It transfers the energy directly ftom the battery so more safe than other but a little complicated: www.aliexpress.com/item/Car-Styling-H4-9003-Headlight-Booster-Cable-Wire-Harness-Connector-Relay-Fuse-Socket-Black-H4-Headlight/32838453046.html. You can use this with all options like xenon bulbs with high powered ballasts. Choice is yours.

[@hakgar]

Nice!!I do have md2s 3.0 in my Hyundai accent.I am vere pleased with it! What type of glue did you use to mount the led on the shroud?Is this safe or maybe road bumps can knock it off?

[@krakenfelt1]

do i need a ballast for these?

[@Retrofitlab]

Yes you do :)

[@Gnik4144]

What else can be used beside the butyl?

[@Gnik4144]

+Retrofitlab thank you for the reply.

[@onesixarts416]

I like the method you use to heat the headlights. Can you use any kind of heat gun for that?

[@onesixarts416]

Haha thanks

[@viziandrei7629]

Hi , can you tell me how did you make the electrical instalation conversion from H4 to H1? because i can't do it.thanks

[@saevers89]

+Vizi Andrei, we used a H4 canbus cable: www.retrofitlab.com/en/kabels/h4-standalone-can-bus.html

[@viziandrei7629]

Thanks for your answer ! ;)

[@emilianodacosta3325]

perdão preciso saber quanto custa o jogo de farol por favor?

[@CarReporter12]

hey team just a quick question if working on brand new hyundai h/l. the oem butyl is sufficient, no need to add extra, right? or it will cause moisture?

[@goldentribe3548]

Mayur Huria how many minutes to put in box with hit gun.

[@mailtonsantosrodrigues3878]

Muito bom quero saber como faço para adquirir um farol desses me respondam por favor obrigado

[@mailtonsantosrodrigues3878]

Preciso só de pessas

[@Motodoshi88]

Amazing job again. Have u ever modify w203 c class 2000 - 2003 heqdlighta?

[@Retrofitlab]

Thanks! :) For the headlights without projectors (halogen) www.retrofitlab.com/blog/mercedes-c180-mini-h1-xenon-retrofit/ If you have the xenon headlight (with projectors) than you will be needing these: www.retrofitlab.com/en/xenon-projectors-1/aharon-e46-r-bi-xenon-projectors-bosch-al-design-1.html Note: Headlight frame needs a little adjustment, a few millimeter of material has to be removed with dremel.

[@Motodoshi88]

Retrofitlab.com U think mini projectors are enough or 2.5 inch projectors will fit in w203 slot?

[@Retrofitlab]

For the Halogen the 2,5" mini H1 will fit; www.retrofitlab.com/blog/mercedes-c180-mini-h1-xenon-retrofit/ For the xenon one a larger one can be fitted; If you have the xenon headlight (with projectors) than you will be needing these: www.retrofitlab.com/en/xenon-projectors-1/aharon-e46-r-bi-xenon-projectors-bosch-al-design-1.html Note: Headlight frame needs a little adjustment, a few millimeter of material has to be removed with dremel.

[@Motodoshi88]

Thank you so much. Will watching you :D

[@geminiz66]

Can it be purchased?

[@geminiz66]

Dont intend to DIY. Buy it modified

[@劉泓毅-e5n]

I wanna buy 05focus light

[@The_Real_JimmyG]

Now those are sharp!

[@JUStCALLMEZIMM]

wanting to put these in my 13 nissan juke gator loght and my main head lights, would 70mm fit the 0 lens?

[@JUStCALLMEZIMM]

Ok you guys have color changing halos or projector?

[@JUStCALLMEZIMM]

Hmm got an email i send a few pics of what id like.

[@603505]

Hi! What type of glue do you use in the time 0:21? :)

[@603505]

thank you!

[@sekopiski]

You painted the indicator reflector too?

[@sekopiski]

Why did it become black then? :D

[@TheCrankaintdead]

+sekopiski lol gud eye

[@SuperOfek1]

How the reflector lights changed to black?

[@SuperOfek1]

Ohh it's another one can you send link to buy it

[@SuperOfek1]

Retrofitlab thanks for your replay i thought that you replace in new one nice work man.

[@SrDolmayan]

Hi, can you please tell me the size of the proyector kit 2.5 inch or is bigger? and what type of bulb use the proyector is H4 or is a different bulb?... Thanks for the video.

[@SrDolmayan]

Hi, thanks for the fast response, in the video you put a resistor between the engel eye and the position ligth socket, what kind of resistor did you put? Watts??

[@MuhammadKHuda]

Mazda 2 2010, please! :)

[@skynett8003]

you definitely are the best at adapting bixenon projectors. They have videos renault logan renault logan or ? and mark bi-xenon projectors used? I would like to give me some guidance to adapt to the headlights my logan .. :) thanks

[@dennis3004psp]

but it's only for offroad use, in the EU!!!!

[@gedasalekveravicius5466]

Dennis Nattkämper maybeif you put HID to stock old reflector. Coz it unevenly spreads the lights and HID bulbs are not meant for reflector. Projector is great way to evenly distribute the light and it works more than with HID bulbs

[@hengower0794]

bize yapıp kargo ile gönderseniz ne kadar olur

[@umutgokcay]

i guess u jucjt fucked insulation of your headlight frame

[@prabhatkumar7545]

Ham Ko hundai gets praim car headlights chahiye

[@oldgames0109]

nice job good luck

[@olmosgalleguillos]

Eres excelente soy de Chile si te pido un trabajo del mismo vehículo hyundai getz pago lo que pidas

[@pedrito0906]

***** He said "You're excellent, I'm from Chile, I want a job for that exact vehicle, hyundai getz, I'll pay you whatever you ask"

[@anirudhaguha9565]

thanks

[@prateekjain3019]

TatA manza ki projector light

[@adiaytbaev6516]

Ооо

[@Retrofitlab]

:D

[@centrinotom8424]

Thank u!!!

[@rachiddjidoujade8686]

Top