"it's not safe to drive on the road" (proceeds to drive it on the road)
@gedas34196 жыл бұрын
Offroad tofu delivery van
@m1chaelsc6 жыл бұрын
Gedas Alekveravičius was about to make the same comment
@hafizizuddin22106 жыл бұрын
fuck yeah 💪
@gedas34196 жыл бұрын
Imagine seeing some kansei dorifto's made with heel 'n toe and weight transfer on mud puddle
@Randomhomieboi6 жыл бұрын
Ea86 fuck no toyota atill yeah van fuck to all the words that mean yes
@dannya49746 жыл бұрын
But it's not rhd
@chrisisworthit6 жыл бұрын
This is why I love you Gingium, cause your cars are UNIQUE, who else would lift not only a Miata for rally, but also a van for what is essentially shits and giggles?!? God I love this channel!
@Belindaxtz6606 жыл бұрын
Me too!
@КлиментЦонков6 жыл бұрын
"Gingium's tofu shop" LMFAO
@sirjoi16286 жыл бұрын
lego technic NANI!? THATS A GREAT IDEA!
@420sx56 жыл бұрын
So is it the BattleVan or MudPanda?
@imnota6 жыл бұрын
Pretty sure he stopped calling it BattleVan, because he decided he won't make it look like an apocalypse van. I think he wants to enjoy it without spending time just for looks.
@_Gingium_6 жыл бұрын
It is the MudPanda now
@nickbilxd45766 жыл бұрын
BattlePanda?
@mchudy40006 жыл бұрын
MudPanda, the battlevan name got denied because of youtube demonetizing the videos because of the name
@G0bz6 жыл бұрын
420sx, love your name so much man wow
@gerritvos58866 жыл бұрын
A couple of questions: 1. Why did you change the front lights and not the rear lights? 2. Why not put steel mesh in front of the lights (this to give it more of a war-look)?
@cobaltlukather90456 жыл бұрын
Gerrit Vos i am totally on board with something like trailer lights on the rear and some perforated steel mesh covering the spaces where the OEM lights fit + the front grille
@titaniumdrift36796 жыл бұрын
Gerrit Vos I just want him to get rid of the van and by the WRX motor for the rally Miata
@lizardfishmanbearpig1818 Жыл бұрын
You dont need to remove the engine to replace the spark plugs… im dissapointed that you couldnt figure that out. Unsubbed ✌️
@Stylemaster9116 жыл бұрын
Now that you're not going to keep it, cut the fenders hard core to remove the rub, should help prevent ruining the tires when getting mad flex
@e-pill6 жыл бұрын
you have come a long way!! you're welding, buying new equipment and new cameras. the new shop in level and echo heavy!! you still need to make that transmission sink, a slide and work tables. congrats!!
@Shadowgallery1156 жыл бұрын
I wanna buy those rims and tires when you're done with them lol.
@_Gingium_6 жыл бұрын
Imma use them when im done :)
@kiraocelot6 жыл бұрын
'new wheels for the miata'
@Shadowgallery1156 жыл бұрын
Gingium can't wait to see the next project.
@mittennomad2666 жыл бұрын
*wheels
@SirDavothe26 жыл бұрын
you do not want those tires, have you not heard the terrible noises coming from the metal eating them up?
@mayflower23146 жыл бұрын
love that i didnt have to click through 11 minutes of footage and you just put the first thing you were talking bout as the title. made me watch the whole thing
@_Gingium_6 жыл бұрын
Thank you
@titaniumdrift36796 жыл бұрын
Gingium can you please buy the WRX motor for the rally Miata
@e93logan6 жыл бұрын
Glad to see the van is back. I think no matter what, remember why you bought the project: to learn a new skill. Welds already looking much cleaner, so it's been a success!
@Katsinum6 жыл бұрын
All these - v8 swap it / exocage it / buy a new clean one - comments seem to be so disconnected from reality. It's just a small fun learning project, and the point of it is to be budget friendly. Like, come on guys.
@_Gingium_6 жыл бұрын
Thank you for understanding!
@Katsinum6 жыл бұрын
Gingium Nah, thank you for making these!
@titaniumdrift36796 жыл бұрын
Gingium please buy the WRX motor after selling the battle van
@UndeadPorcupine6 жыл бұрын
"Why don't you LS swap it?" -12 year old boys who have no idea how time consuming and/or expensive it is to swap in an engine that the car was never meant to use
@jesse2916 жыл бұрын
A new profile picture with at least a little Photoshop makes your channel look so much better, because the picture can make or brake a first impression. I would suggest 4 pictures of your 4 cars put together!!
@titaniumdrift36796 жыл бұрын
Jesse De Rooij I would suggest putting a nice picture of Molly on there for a profile picture
@lex_deemter6 жыл бұрын
If you arent gonna sell it and just junk it anyway when you are done you might as well completely cut the front fenders into the cab
@beeftestolone6 жыл бұрын
I dident read the title I clicked on the video because I love you no matter what you upload...
@thatsnotgonewellatall55176 жыл бұрын
HASHTAG ANTI-MEME guess that's good that it's an interesting video
@Kieran870486 жыл бұрын
I'm so glad it's back! This makes me very happy 🐼💪🏼👍🏼
@michaelbonadio92696 жыл бұрын
You have a PIPE bender (aka the kinker) + you are using TUBING = the different size materials are incompatible. TUBE is measured in outside diameter while PIPE is measured inside diameter. If you go thicker wall TUBING or you use PIPE you will get better results.
@_Gingium_6 жыл бұрын
I see. Well... oops....
@DriftBuddy6 жыл бұрын
Throw some sand into the pipes and tape up the ends and try bending again. The sand will help with the kinking of the pipe, gives it a bit more structural rigidity. Keep the builds coming dude!!
@yanoyeah6 жыл бұрын
Full the pipes with sand and then bend them, it will keep the radius of the pipe. Great to see you happy with the van man
@literallyvile6 жыл бұрын
With a proper amount of love, the mud panda could look so badass. Don't abandon it even if it sucks to work on it.
@bug6046 жыл бұрын
Who noticed he changed his profile pic
@85square6 жыл бұрын
me, and it sucks
@bug6046 жыл бұрын
I'm OK with it but I thing he should have it of the two miata
@olivertuomola6 жыл бұрын
James Adams x yeah both miatas would be better
@Kristo996 жыл бұрын
yea
@easternsasquatch6 жыл бұрын
Not to mention he looks bad in those glasses
@buz10006 жыл бұрын
just a small welding tip. if ur welding somthing onto a platform make small welds all around it it will make so the thing u are welding on isnt wending or getting outplaced! sick build btw!
@JustPasha6 жыл бұрын
MudPanda ahaha cute!
@josharuuu58496 жыл бұрын
Just Pasha hi pasha.
@josharuuu58496 жыл бұрын
Just Pasha what do you recomend JBL headset or Sony headset?
@JustPasha6 жыл бұрын
JoshTheGamer 1021 I’d say Sony is a better brand. (Better quality)
@JustPasha6 жыл бұрын
Brthr T haterrrrrr
@MadSteeIy6 жыл бұрын
JoshTheGamer I have a Sony MDR-XB950N1 and I really recommend it, sounds is awesome and the build quality does not feel cheep, battery time is good and Bluetooth range is really good
@Darthadios6 жыл бұрын
Ask from local Toyota dealer how to change the plugs to the Previa, it can´t require removing the whole engine, that doesn´t make sense. Also put some lenses to the headlights. I like the Previa videos.
@gavinhatfield23546 жыл бұрын
I like whatever you put on KZbin. With that being said, I also completely enjoy the MudPanda. I don't get pissed when I see it, to me it's along the same lines of buying a school bus.
@poepeloerke26 жыл бұрын
Hi Ging, I have some tips for using a pipe bender like that. I saw someone try out using a die that was a bit too narrow for the pipe, so the pipe would actually sit on the edges of the die. He had great succes trying that. Another tip I heard is packing the tube full of sand to keep it from compressing.
@zidanmotorkovic6 жыл бұрын
Put a steering wheel for rallyata to this and buy new for the Miata.
@fretfultoast78856 жыл бұрын
Martin Novák I didn't really understand you
@zidanmotorkovic6 жыл бұрын
FretFul Toast sorry, autocorrect.... for should be from
@bczd6 жыл бұрын
Hey buddy, I know it's a tad bit troublesome but you can pack sand in your tubes, after which add water to make it dense before bending them, prevents crimps and wrinkles. Another easier solution that isn't too troublesome is a flexible rod made of lead/tin/copper/soder etc. Even a bunch of wire shoved in to fill the space makes the finish significantly better. Good luck!
@evanthag1056 жыл бұрын
that bender is made for thick pipe. i use mine mainly for 1.5" od .120 dom and works pretty ok. Also your welds look really good for just gettin a mig.
@teamground02296 жыл бұрын
You persevered on the project! Perfect gambler rig! Mud Panda is a fantastic name.
@carsonbaker85316 жыл бұрын
When ur done with this u should get a old Toyota pickup up or something that's actually meant for off-road (not miatas and mini vans lmao) and build it up... I would really enjoy that
@_Gingium_6 жыл бұрын
Thats the plan :)
@carsonbaker85316 жыл бұрын
Gingium ohhh I'm looking forward to it
@Belindaxtz6606 жыл бұрын
This idea would be awesome! I used to own a red toyota hilux 2.4 d4d. Go anywhere vehicle!!
@Belindaxtz6606 жыл бұрын
Check out what OLD TOP GEAR did with the red truck!!!
@huntracingdevelopment56046 жыл бұрын
I like mudpanda. I can’t wait for the mudding videos! Keep up the great work ging!!
@ConnorRonan116 жыл бұрын
I know this build made you mad... but I wish this van got more love because I think the off-road panda is incredible. I really wish you could dedicate more time to this build. I'd love to see you drop the engine, do a refresh and completely fix the tire rubbing issue.
@G0bz6 жыл бұрын
Everything you said, but not on that shell. Maybe he could find a cleaner one without all those rust problem. As it sits now, it's not worth fixing it I think.
@ConnorRonan116 жыл бұрын
Gabriel Gobeil I believe this was the only Previa with in 1,000 miles of Chicago.
@klassenkustoms99326 жыл бұрын
Connor Ronan only manual Previa... he should get a cleaner shell and use this one for the manual parts
@titaniumdrift36796 жыл бұрын
Connor Ronan honestly I don’t think it’s worth it to get a new one or rebuild the one he has it would be too much money and to take a lot of time and hard work and that’s taking money out of the rally Miata WRX motor swap
@jessevoidswarranties83356 жыл бұрын
I'm glad you didn't get rid of it.
@RedneckSwede6 жыл бұрын
The great tale of MudPanda the mighty battlevan, and the all powerful knightium!
@MarkSawatsky6 жыл бұрын
If that bender kinks the tubing, pack the tubing with sandblasting sand (finer the better) and tape both ends (pack it tight) then bend the pipe. The sand will prevent the kinking and you just drain the sand out afterwards.
@is300ev26 жыл бұрын
Lol 0:59 you said it’s raining now. When you said that it literally started raining where I live 😂
@meliksahkurt6 жыл бұрын
Too happy to see this car again on the channel
@KayeXe6 жыл бұрын
There should be an access panel underneath the passenger seat, gets you right to the spark plug cover. It's actually pretty easy to get to.
@CopyofCharlotte6 жыл бұрын
I had a bit of an idea for the Rally Miata, Probably not the best idea because you already sort of have a ram bar, but get a ram bar of a retired police car and weld it to the front.
@sly21966 жыл бұрын
doesn't look half bad. looks better then expected
@vegasmech96936 жыл бұрын
Looks like you need to turn up your power on your welder, it looks like it's stacking the metal. If you tape the ends of the pipe after filling it with sand it will help stop the pipe from crushing in on itself.
@tylerhunt75526 жыл бұрын
I've only welded a couple times as practice, but I wanted to say I can definetly tell your welds are getting better. Keep practicing.
@carsonbaker85316 жыл бұрын
YES I LOVE THAT THING
@loubackervlogs2366 жыл бұрын
I love the van
@ConcordeOne776 жыл бұрын
keep going at it, I am enjoying your experiments with the Previa...my family has one. It is an interesting minivan and it still runs brilliantly
@enlightenedrenegade4726 жыл бұрын
I love the new pfp Caleb! Looks so much better than the wheel you used to use.
@cadlo78806 жыл бұрын
THAT THUMB NAIL😍😍😍
@SKunkle4206 жыл бұрын
on the passenger side,open the door,and i believe there are a small door under the carpet where you can change the spark plugs,because the engine is on the middle,i work on 2 or 3 back in the day.
@stunt5096 жыл бұрын
Welding is getting way better. You stud👍
@viveklego6 жыл бұрын
If you do ever get another minivan, a track build would be hilarious and awesome.
@kings_nemesis59956 жыл бұрын
Another tip when welding a square or rectangle weld opposites so it doesnt warp from the heat and pulling of the weld
@travisreising39726 жыл бұрын
You should do a poll on KZbin and see what we should do next to the battle can that would be cool cause what I was thinking of cutting it more so it doesn’t rub out fender flares on it
@rh2racing6 жыл бұрын
one thing to try with the bender is to fill the pipes with sand. sometimes you can get some good mandrel bends like that
@hpe3406 жыл бұрын
The interior looks mad clean
@joraforever98996 жыл бұрын
This is like the perfect vlog car, the view is just perfect (just don't listen to the rub)
@adamdrumonde16646 жыл бұрын
The panel under the passenger seat gives you access to the spark plugs and fuel system. It's a practical toyota van. I don't think they would have engineered basic maintenance to be an engine-out service.
@ConnorRonan116 жыл бұрын
You've come a long way with your fabrication!
@benmolnar12596 жыл бұрын
Yap 120fps perfectly marches the frequency of the lights! :D I am glad you found a new sponsor for the Panda
@Chrom35kull6 жыл бұрын
I thought of a silly idea to remove or reduce the front wheels rubbing by extending the lower control arms. Did a quick youtube search and came up with a couple of videos on how they did it. This would allow you to move the ball joint further out from the car and allow you get greater clearance from the arch, or even reduce the width of the spacers. Or another idea, if feasible, would be to mount the front wishbone mounts further forward of the car. maybe an inch or 2. but that would allow you to cut more of the unused front of the MudPanda and would move it away from the interior obstructions (foot well).
@mrjrnotch51806 жыл бұрын
Yes yes yes!!!! I love off-road stuff. Keep it up!
@novastarproductions6 жыл бұрын
Next time, fill pipe with sand, close up ends and you will have a cleaner bend, also wear ffing safety glasses when sanding 🙂
@aleinworkshop318966 жыл бұрын
Caleb! Bring the bus and the van and compete in the Oregon Gambler 500!
@joshy2836 жыл бұрын
It looks so good with the tires!
@nkomoian6 жыл бұрын
10:15 seems like his enthusiasm has changed 🙂👍🏾
@Elmer_RedEagle6 жыл бұрын
Nice, I have some auxbeam led pods, and they have been abused and still work great. Been about 3 years since I bought them. Pretty good for the money.
@Bobbelebob6 жыл бұрын
Great that you're sticking with the car, thought you already sold it
@deadjuice37456 жыл бұрын
you improved the welds massively
@codybowyer10486 жыл бұрын
GINGIUM IS THE BEST KZbinR, WE ARE BLESSED
@kenwoody4294 Жыл бұрын
What was your solution for front and rear bumpers? What do you think about putting tube steel bumpers on it?
@kunalsen36756 жыл бұрын
If I'm honest the slow no was pretty cool. If you timed the flickering with the breakdown in a song it would be really good
@BH-uk3ck6 жыл бұрын
You don’t have to remove engine for plugs, you take off passenger seat and floor panels beneath the you can see plug leads and access the spark plugs, just did it last month in a 91 previa although maybe it’s different on a manual previa Also love seeing previa vids
@p1llsburym4n216 жыл бұрын
This man deserves more subs
@lsswappedcessna6 жыл бұрын
Check for vacuum leaks! That could be why it idles high. Also, 3:42 DAT DIESELING
@73Bugman6 жыл бұрын
Nice to see your fab work. I wish the van was less of a pos. Still think it would be more fun to have a multi-seat rat rod drift van. Seems like a big effort for something that barely runs.
@DartBProductions6 жыл бұрын
Welds are looking sweet!
@Carnerd1016 жыл бұрын
I'm excited to see it finished, utilized, and then moved on from.
@ItsCataclystOfficial6 жыл бұрын
Use the next size smaller die on the pipe bender you won't get as many dents. Make it so the pipe sits on the edges of the die. Try it and you won't regret it
@benstaley546 жыл бұрын
When using the bender use a die that is smaller than the tube and it will bend cleaner if you didn't know already.
@baloneyjusticecheezedog6 жыл бұрын
I feel like the Mudpanda could be exciting but you should double down on it... and rip out the interior, and use this also as practice for repairing a rusty body.. Also you welds are looking really good. I'm really surprised how fast you are progressing. I would think you should get a tube notcher next and learn to weld tubing to itself in cage patterns. :-) And build a table while your at it!
@atrojanrabbit6 жыл бұрын
When Gingiyms welds look better than the ones holding that tube bender together 😂
@_Gingium_6 жыл бұрын
Lol I noticed that too. #harborfreightquality
@CodyFurr6 жыл бұрын
I love this build so much
@Belindaxtz6606 жыл бұрын
Hey Gingium you are incouraging a whole new language-ium!😉😉😉
@voidwalker57846 жыл бұрын
While I wouldn't say you're welds belong in a art gallery they will definitely do there job as welds and for someone who pretty much just started welding that's all you can ask for. (there better than my novice welds)
@Spring7946 жыл бұрын
Check the ignition switch (not the ignition cylinder) on Molly. That may be why the wipers don't work
@ficerion64786 жыл бұрын
A bit late, but there is a second access point under the passenger seat (and carpet) where you can get to the rest of the engine. From there it should be easy enough to get at and replace the spark plugs. This car would probably run a lot better with plugs and a service, shame the rest is so rusty though.
@5pd5tr6 жыл бұрын
Gingium, you should really fix the rubbing on full lock. Since it doesn't matter if the van gets ruined or not, just half-ass the door so it's driveable. Maybe even make some of those jeep doors thatr are just a bunch of pipes.Oh, and the rear sliding door could become like the side door of an old VW Bus, so it (they?) can open and the back can be actually used.(rant/)
@whyughgeez6 жыл бұрын
Out of curiosity, why didn’t you sell the tires and get smaller ones to help alleviate the rubbing?
@mcwillies27376 жыл бұрын
Fabium back at it again
@mateobravo13246 жыл бұрын
I am excited to see your fab skills on the MP
@pixxel86376 жыл бұрын
For the light flickering with the shop lights: Apparently these two video modes (PAL, NTSC) are for countering that, you have to set it to the mode that takes frames in the same interval as the "blinking" of the lights. Just test that, I didn't try it out myself haha
@brandoncaldwell956 жыл бұрын
That style of pipe bending is ment more for solid pieces. Fill the pipe with water or sand then bend. itll be a much cleaner bend
@IslayAnderson6 жыл бұрын
Hype AF for the mud panda
@h171l26 жыл бұрын
mud panda just sounds so much more unique and special then battle van lol
@RockNLol20096 жыл бұрын
filling the pipes with sand before bending might help against the dents ;)
@Fjewt6 жыл бұрын
i love watching u build stuff keep it up :P
@StanleyKubick16 жыл бұрын
replace the fluorescents with. you'll save on power and they're slo-mo compatible
@etiennebelanger86445 жыл бұрын
super cool project ! unique !
@slayer_of_thots6126 жыл бұрын
Dude perfect music
@BrmP6 жыл бұрын
I was wondering, if you are going to trash it anyway why not just cut in to the doors in the front so it can actualy turn, I imagine it would also drive better off road if it can turn