Revell 1/144 A318 Frontier

full kit description of the Revell A320 with full build of the modified A318 with Frontier livery.
music www.bensound.com

[@noelfroggatt416]

Very nice build again, Like the music.

[@airlinersmodelmania]

Thank you 😉👍

[@delvinrodriguez3341]

Superb build! Somehow I completely missed this upload! But I requested you to build one of these little guys a few months ago and you did! Again Fantastic build!

[@airlinersmodelmania]

Thank you for the nice comment, I will have another A318 and an A319 modified but they will come at the end of the year. Stay tuned ;-)

[@zoe50ccs]

I have a A319 not A318 but superb assembly and decoration from Frontier. 👋👋👋

[@airlinersmodelmania]

thank you

[@Arp1757]

Ve4y nicely done! I did a A318 Baby Bus from the Eastern Express kit (painful, that was) with Draw Decals for Shelly the Sea Turtle. They do look kinda cute, tall tail and all.

[@airlinersmodelmania]

Indeed, I will make another 2 baby airbuses in Avianca and Mexicana livery stay tune ;-)

[@michaelbartnick5060]

Due to the new position of the cargo door the wing body fairings on the A318 are asymmetrically arranged. The housings of the CFM engines should have been lengthened, 'cause A318 uses the -5B variant. The model also lacks the typical wind deflectors near to the front gear on the lower fuselage, which are a characteristic of the 318 - These are due to the AoA (Angle of Attack) sensors, which are located closer to the nose landing gear due to the shortening of the fuselage, from which they are intended to deflect the air swirled by the landing gear when curving. That's the details for a top model..

[@airlinersmodelmania]

Thanks for all those info

[@tcandle695]

Very Nice. First time I see a Revell Airliner with that type of defects. But I know Revell Germany has a Excellent customer service when it comes to replace defective parts. How can I obtain the cutting Instructions? I have a A320 kit to convert to A318. Thanks for your videos.

[@airlinersmodelmania]

Hi Ricardo, Honestly it is quite simple, only the fuselage have to be modify. 5.5mm for the high of the tail, and remove 5 windows from the front section and 7 from the aft section. With a lot of putty and patience you will get a decent result 😉👍

[@patrickmaritano3802]

Alors pour résumer 5 cadres de fenêtres avant et 5 cadres de fenêtres arrière de supprimé ! C’est bien Ça ? Merci

[@airlinersmodelmania]

5 à l'avant et 7 à l'arrière, et élever de 5.5mm sur la queu😉

[@charlescoulombe5323]

Very good but forshure you're from quebec of France

[@airlinersmodelmania]

Thank you, actually I am from Switzerland 😉