Revell 1/32 Messerschmitt Bf 109G6 late-video build

About the aircraft:
The Bf109 is one of the Luftwaffe's most famous World War II fighter aircraft. More than 33,000 Bf109's were built in many different versions. Both its climbing capability and acceleration in the dive were two of the Bf109s strong points. In production since the summer of 1942, the Bf109G series displayed some noticeable changes compared with the previous Bf109F version. The G-5/G-6 had a MK 151/20 mm cannon firing through the engine. Two MG 131 machine guns were installed above the engine. The belt-feed to the uprated armament necessitated aerodynamic modifications to the engine cowling's which gave the aircraft its characteristic bumps .
The G-6 was used extensively on all fronts from March 1943 until the end of the war. Later production lots of the Bf109 G-6 were given fixed rear cab windows in a one-piece design which vastly improved visibility to the rear. During a further modification the tail was fitted with a rudder that was higher and had a larger area than previous models. With a total of 13000 units, the G-6 was the most widely produced of all Bf109's.
----------------------------NOTE Mar 17,2014 !!! @ Marcos : propellers are placed in the correct position but unfortunately after photo shooting! Sorry about that! ------------------------------------------- with Bf 109G-6 Prop and Spinner set BR32122 Barracuda Studios! (btw Highly Recommended!).
Model:
length 284 mm
wingspan310 mm
number of parts182
New Mouldings
Early or later versions can be built
Detailed Surfaces with recessed Panel Joints
Detailed Cockpit with Instrument Panel
Many interior cockpit details
Separate tail wheel
Movable propeller
Detailed Under-carriage bay with side walls
Detailed Under-carriage
The option of 2 different Wheel Rims and Tyres
The option of 2 different Upper Cowling's
Separate Ailerons and Flaps
Separate Slats
Divided Cockpit Canopy with Rear Armour
A choice of Early or Late Rudders
The choice to build the Early or Late version Cockpit
Additional Fuel Tank
Decals for the following versions:
Hauptmann Franz Dörr, Bf 109 G-6, W.Nr. 411960, Stab III./JG 5, Gossen, May 1945
Hauptmann Karl Rammelt, Bf 109 G-6, W.Nr. 160717, Stab II./JG 51, Rumania, April 1944.
for more details about the tools, paints please visit www.revell.de/e...
Airbrush: Sparmax SP-35, for more details please visit:
www.sparmaxair....
Music copyright by KZbin Audio Library.
Thanks for watching!
All the best!

[@chs82ndab]

What a great tutorial. Am building this G model as I write and this has been such a great help, even for a 59 year old who has been building WWII aircraft since I was 8. Regards

[@wakemanedwards3450]

+chs82ndab I know what you mean my friend, I am 57 and medically retired and now disabled. I now have lots of time for this wonderful hobby I have loved since I was 10. I am also learning about new products and how to use them, s well as techniques I never knew that are fantastic. I just bought my first airbrush a few months ago and trust me, great results and yes, you can teach an old dog new tricks : ) This channel and a couple of others like it are fantastic, I have learned so much. All the best

[@PrivateDoge]

+Wakeman Edwards and i am a 12 Year old that is a complete beginner but already loves it!

[@markwilliams974]

I got back into it two years ago at age 59. I had been building them off and on since I was 8 as well. Now I'm using an airbrush, acrylic paints, adding weathering, chipping, grease and oil stains, ...the whole bit. There is something challenging about getting the right look. Each kit has its flaws (mine ...not the manufacturer) but they are getting better and better each time.

[@wilcoxjames2]

I have watched this video 3 times, and then ordered the kit. Outstanding paint work! I hope I can do a humble replication.

[@wakemanedwards3450]

Tools in the hands of an amateur typically produce amateur results. Tools in the hands of a seasoned MASTER such as yourself, produce professional results. It is a pleasure to watch you work. Thanks for sharing your skills.

[@AlexModeling]

That is The best video build i have ever seen until today... ni e video editing and of course great modeller work.. a stunning piece of art!

[@bobdyer422]

Dusan, A blast from the past! Cool! I was working on my 1/32nd Trumpeter 109 G6{early} and this popped up. Great job and you've only gotten better. Congrats!

[@ScaleModelAircraft]

Thanks Bob!! Take care and all the best! Dusan.

[@Massimo1975Max]

Well done Sir. Thanks for all the time and effort you put in to show the rest of the world. amazing work. Well done.

[@ScaleModelAircraft]

Max Vicoli Thank You! You are welcome! All the best! Dusan.

[@georgebrown6540]

Not only is this a great tutorial, it shows how a work of art is created, museum standard stuff in my opinion. As for dislikes, I think if you dislike, its your perogative, but surely a reason should be given. Anyway thanks for sharing.

[@ScaleModelAircraft]

George thank You for kind words! All the best! Dusan.

[@Cabilis66]

Fantastic build mate ! Your airbrushing skills are top notch ! Thanks for posting this video :-)

[@JackFlemingFan1]

Excellent video & job building your Revell 1/32 Messerschmitt Bf 109G6!!

[@nudzi]

Hi, I just wanted to drop by to say how much I enjoyed watching your build. Very, very nice and entertaining. Nice choice of music, very relaxing :)

[@wesmander]

I've just finished this kit , nice model , the only bad thing about it was the random numbering that revel seem to plan their kits with , you spend more time going through

[@ModelloursWorkshop]

Very nice video.Looks like a great kit. The result is stunning too :)

[@Desertduleler_88]

They make it look simple....Great job.

[@highflying82]

Who on earth disliked this nice little tutorial thumbs up

[@ScaleModelAircraft]

jeff nicholls Thanks Jeff! All the best! Dusan.

[@highflying82]

No probs dusan keep em comin

[@antonrudenham3259]

jeff nicholls Jealous types,which include me but without the dislike of course.

[@miyabe_k195]

what toll is that?? that spary thingo

[@instirahul]

Freaking brilliant man! Great job!

[@Ryker45]

I have really enjoyed this video, thanks for posting. Thats the first time i have seen anyone spray with enamels and what an excellent job. Thats a fantastic model and video mate.

[@mikek2130]

Seriously the best work i have ever seen! Thanks for sharing

[@bradsbunker]

A really nice build, and nice painting techniques. Great looking 109.

[@Adamslee72]

best tutorial i have seen so far and what great subject to choose as well thanks for sharing subbed!! happy modelling :D

[@juanrios9522]

Nice kit, nice build, nice video..thanks for sharing

[@jakecutter5125]

Hi Ian an excellent build so different to see an Me109 in a different country`s markings. yours Steve.....

[@cesarignjas]

talking about compressors, i had one without tank and i was realy pissed off trying to do fine detail and it was "pulsing" so i did one tank myself, I went to a pet´s store and bought some aquarium hose and metal conections and valve, so I perforated 2 holes in a 2L soda cap, putted the hoses there, one in coming from the compressor and other out to the airbrush, it take some seconds for the compressor pressurize the bottle but then I can spray with no problems at all, I use the maximum output of 20 psi, don't go further or the improvised system may leek but it was the easyest and cheaper solution y could come along, cheers!

[@ApriliaRSV4F]

Just came across this. Nice build.

[@TheSeeka]

Excellent build guide. Very good and very informative. Big Props!

[@bathwars]

nice build, I'm thinking of starting one of these soon and your video was very helpful! :)

[@ScaleModelAircraft]

@B_M_F_710, You are welcome! I recommend gravity feed airbrush, that is my first choice, I also use the siphon feed AB with no problem at all. if You dont have the compressor right now and You are using air can (for example Revell Airbrush Power), gravity feed airbrush is way to go, becouse You can work with ultra low pressure, so the can will last much much longer. And that same Airbrush You will use when You buy compressor. Compressor with air-tank is best option, but You can find a good oil free piston compressor very cheap for start (Gamma/standard). For the brand part, I dont have favorite AB, I am using Sparmax SP-35 in this video build, It is a very good and very cheap airbrush. I also have Iwata, Revell, Richpen, I like them all. So I dont have favorite brand, it is a matter of choice... All the best! Dusan.

[@1339LARS]

+ScaleModelAircraft I use a IWATA compressor you can´t even hear it !!

[@mohammedkassab6948]

I like your builds man keep up the good work

[@JeffreyStrader]

Dusan I wish you put out "Building Technique Videos"............You are truly talented.

[@jaja1818]

glad to see revell is stepping up their quality..but trumpeter is already dominating this scale in with their pricing bracket..would have wanted to try this kit though..maybe someday when i have extra cash

[@wesmander]

I made this , nice kit , only annoying thing about all revell kits is having to look through all the sprues during assembly stages to find the parts you want unlike tamiya, trumpeter etc

[@theflamingzero3006]

The Camouflage is beautiful!

[@caramel1301]

whoa I can never make one that good

[@MAN394631]

Again you made a perfect model, so awesome, i like your way how to build a model so much, really my taste. Greets from Germany

[@kariodim]

Excellent video. Amazing skills.

[@mark109s]

Great job, lots of tips! Thanks

[@MrBioniclefan1]

Great video build there

[@InternationalBritishModeler]

Fabulous video and great end result! Subbed : )

[@markcameron360]

Great demonstration and skilled artist; I think however the propellor blades were glued on back to front - small detail but slightly important on the real aircraft!

[@ScaleModelAircraft]

+Mark Cameron Yes, but please look at the info section ;-) All the best! Dusan.

[@paradisdescieux]

very nice work and o good video.

[@AlexModeling]

Amazing work!!

[@marcelwildeboer]

Like to see more big scale builds.......greet job..

[@Guillaumeaviation]

very good model !!!

[@Joe8648]

it is a pretty nice I have built it the only problem I have is with this much fine detail there is no DB engine that comes with the kit.

[@kakosstudio]

Well done!

[@MrMikepaniora]

cool man....nice job

[@steveborkowski2125]

Awesome camo !!!!...

[@paips4]

I agree with Michael Witmann, American Revell kits leave a lot to be desired.

[@DavidJones-wr3sb]

got this model for Christmas 3 year's ago. .2013 ....only just started to build it lol ...Christmas 2017 😆

[@GLUESBROTHERS]

Good video!

[@DavidOteroNavarro]

Really nice build! Just a minor detail... Is it me or the propeller blades should be the other way around? Aside from this, great details and I really like the subtile, non over-the-top weathering.

[@alaric3415]

Great tutorial, build and detail! The tutorial was very helpful. Why dont you try using a paint brush instead of a air brush sometime?

[@wakemanedwards3450]

+there siko in town Gaming WHY ? Are you suggesting that an airbrush is cheating? I bet you cannot use a paintbrush and no airbrush and get the kind of results shown here. Why would you suggest this, are you trying to challenge this man's skills??? I'm truly curious why you would request this.

[@josephlacicero2235]

very nice. Thanks!

[@darudesandstorm5372]

nice work ☺

[@ScaleModelAircraft]

Thanks! All the best! Dusan.

[@williammann6198]

Awesome!

[@paperitgel98]

great model :D more of these video please, ill subscibe

[@forcedadventure]

THANKS FOR THE GREAT VIDEO !!!

[@osya13able]

Thanks very nice video.What kind airbrush you use?

[@GBooth]

Great video! I see you using a lot of Revell enamels on the model. Did you use the Revell enamels for the RLM 74/75/76 camouflage, or another brand? A list of materials/brands at the end of the video might be helpful. Beautiful work, though. Thank you!

[@ScaleModelAircraft]

I can add a list of colors used in video build?, all colors are from Revell range (Enamel colors and few revell acryl farbe). Thanks for the comments! All the best!

[@Hardeuce]

Schönes Model, gute Dokumentation, nur schade, dass die Propellerblätter falsch montiert wurden :-))

[@ScaleModelAircraft]

Thanks! You should look at the NOTE in info section (description below the video) All the best! Dusan.

[@kaspahrc2200]

beautiful

[@Vuhai100]

I really like the Messerschmitt Bf 109

[@AlexModeling]

I cant even imagine why 2 guys dont like this video! Probably they r jelous!!

[@ApriliaRSV4F]

I know this is an old video now, but I would guess it is because of the voice. I find it annoying, but nothing I would give it a dislike for.

[@FABIUSMAXIMUZ]

Estupendo!!!!

[@raytheron]

I just came across this. What a lovely build, as always. You're a master, Dusan! Just to satisfy my curiosity: where does the narrating voice come from? I take it it is not your own voice?

[@ScaleModelAircraft]

I forgot, I think the program is a E-speak or something like that. I sould check it out for You. All the best! Dusan. btw. Thank You Ray! :-)

[@raytheron]

Thanks for that. No need to check, I am satisfied with your answer :-) You are welcome, my friend. Always a pleasure to watch a master craftsman at work!

[@stalker797813]

бесподобно!!!!!👍👍👍

[@B_M_F_710]

Great job and great video, thank you. What airbrush supplies and method do you recommend? Method as in air compressor or air can.. Siphon or gravity feed.. Brands etc, I am new to the hobby.

[@willcampbell2909]

that is releasing the full potential of revel Germany

[@alexsteel5959]

Love the back ground music. What band or bands?

[@DosGaming101]

Revell Germany make very good kits. American Revell, not so much...

[@tomeknazgul2346]

Jesteś niesamowity wspaniały film , a może tak zrobisz film z A-10. czekam na następny film.

[@tf_infiniti4785]

Beautiful masterpiece! I need to know do stores sell ready made planes? How much is it?

[@gino1212g]

felicidades muy bien explicado

[@deadviking7156]

What spray gun do you use ? One question: How do you get the white stripes that accurate on the spinner ? Did you just taped it with masking tape ?

[@ScaleModelAircraft]

Decal for spinner stripe, but yes you can use strips of masking tape... easy and spray white/black. AB Sparmax SP-35. All the best! Dusan.

[@deadviking7156]

ScaleModelAircraft What do you think about the Revell spray-guns ? I want to buy a spray gun too. But i also need a compressor.

[@ScaleModelAircraft]

Dead Viking Very very nice, but if You can afford please buy a version with gravity feed! All the best! Dusan.

[@joshcarnes6489]

i recently got a p-61 black widdow but havent started yet. i just wanted to suggest it for your next video

[@ScaleModelAircraft]

I will think about the P-61. I have many kits on ma w.bench right now. Thanks! All the best! Dusan.

[@PrivateDoge]

+ScaleModelAircraft can you maybe built the 1:72 Boston MK V?

[@Vuhai100]

It's one of my favorite German fighter

[@ppvpz]

Hi!! Awesome job!! I have some doubts about airbrushing onto a small table, as you do. How much pressure are you using in the airbrush?? What is the proportion used to dilute the ink?? 50/50?? Thanks a lot!!

[@illes.gergely002]

Is this an official Revell video? The finished model really seems to be the same as it is shown on the box. I guess that's why he use only Revell products.

[@hanscombe72]

I would love to see you do the Revell 1/32 Spitfire Mk II.

[@AlexandreKlafke20]

Hi !!! Very nice work ! What is the primer (black) you use in boby frame? acrilic or enamel primer?

[@lemo_manda6076]

This video & are so nice .... and bought :D

[@greenarrowk5930]

Hi kind sir, great build, as I see, you are using the Revell Enamels for airbrushing, tell me, how do you thin them?

[@ScaleModelAircraft]

Thanks! For Revell paints I am using Revell color mix, original thinner. The color mix is 50-50 enamel paint and thinner. All the best! Dusan.

[@PrivateDoge]

+ScaleModelAircraft im sorry but is the enamal paint the normal revell paint?

[@cg462]

Very well done. Did you ever apply swastikas?

[@lonewolf-qz1vx]

Hey, guys! I'm kind a rookie here and I have couple questions for you. At first which company should I pick to buy models? Is it AirFix, Italeri, Revell? And what do recommend me to start with (which scale and other?

[@abelkersten4319]

I should start with italeri. They make easy kits

[@MrTelecasterIV]

Is it possible to paint a model plane properly with a brush? I paint for almost 10 years 28mm mini's (Warhammer etc.) but now i wanna do some WW2 models, the only thing is i don't have a airbrush (because i live in a appartment). Thanks in advance.

[@militarymodelling7933]

Just curious, how did you make the white swirls on the propeller hub? I tried to do it on my own G6 (albeit it being 1/72) and it went horribly wrong!

[@1339LARS]

+MilitaryModelling Just use the decal provided !

[@EvertHarley1]

What music did you use for this clip? nice plane

[@azdave2721]

Hi, Great build. Why no primer? I always thought it was needed. Best regards..

[@ScaleModelAircraft]

With swastikas video will be forbidden in some countries. :-/ All the best! Dusan

[@chuckschillingvideos]

Perhaps it's just me, but it sure looks like you painted the interior of the cockpit black, not RLM66. Was this by design? I'm not aware of any 109G's with a black interior.

[@ScaleModelAircraft]

chuckschilling it's just You ;-) Interior color original RLM 66 Schwarz Grau (black grey)... All the best! Dusan.

[@chuckschillingvideos]

ScaleModelAircraft You're right, of course. I wrote that seeing you applying the base coat of black, but upon playing the video again, I see you applied the top coat of RLM66. My bad.

[@bob12123]

dam i really need to buy an airbrush.good job bythe way.

[@sowa18]

Why have you blurred swastika on the tail? Have you do the same with red star on soviet planes?

[@TheDemon190]

Did he put prop blades on wrong looks like the convex side was to the front

[@ScaleModelAircraft]

Roger Young Please look at the NOTE in info section (description below the video) All the best! Dusan.

[@taylorperkins89]

How did you do the spiral design on the spinner? Was it a decal?

[@ScaleModelAircraft]

Yes, Decal, All the best!

[@GAW912]

Excellent video in a host of others. Where does that voice come from? It's bloody brilliant. Reminds of those cold war era infomercials like the bit sampled in Frankie Goes to Hollywood's Two Tribes. Su-bloody-perb. 👍

[@ScaleModelAircraft]

Thanks! All the best! Dusan.

[@blanc087]

are you using enamel paints to airbrush?

[@gollumxonpc5162]

What is the stenil called that you painted the wheels with? I need one of those but cant find one

[@ScaleModelAircraft]

Hasegawa Trytool TP-1 Template Set No 1, very handy for scribing and painting. All the best! Dusan.

[@gollumxonpc5162]

ScaleModelAircraft Thanks a lot, always answering so fast. In what ratio do you use paint to thinner for your airbrush? Also what sanding paper do you use? 600? 480? I tend to scratch the model so i have to paint it multiple times

[@ScaleModelAircraft]

gollumxOnPc For 1/48th scale use 800-1000 grade sand p. as a start, for 1/32 scale You can use 600 grit as a start... 1000, 1500.... All the best! Dusan.

[@welshzecorgi7903]

What air pressure do you usually use when you airbrush? I've been using about 20 psi, but I don't really know much about airbrushing. Thanks.

[@ScaleModelAircraft]

1-2, 1-6 bars Thanks! All the best! Dusan.

[@Blackriver48]

hello, how do you attach the small cockpit parts to the wooden stick, i have some issues becaus i am doing my very first model and have everything i need but not the experience ... greetings from germany

[@ScaleModelAircraft]

MoritzM. Hello, I am using blue tack (You can use Patafix-UHU available in Germany). Also regular masking tape can be used for holding the small parts. All the best! Dusan.

[@chuckschillingvideos]

ScaleModelAircraft Another technique I like to use is to take a stick of sprue, set the tip to melting with a flame, then blow it out and apply the melting blue to the part I want to hold awaay from my hand for painting or whatever. It holds it securely enough, but easily snaps off when want it to. And every modeler has a lot of waste sprue about!

[@markwilliams974]

I use a dab of modeling clay on the end of a stick, sprue, or Q-tip. Doesn't stain and holds the part well enough to paint it.

[@masterphil156]

40:03 where can i buy this Klear??greets from germany! your Chanel is cool

[@RetriNoob]

I was teared

[@alexsp7086]

did you use the decals for the cockpit or paint that free hand :)

[@TheTechGuy7610]

идеалния самолет на света е този който ти купя