Wow! Nice work with that Husky! I need one of those stumps for chopping wood. Haha!
@KillingerUSA7 ай бұрын
Great saw! Merry Christmas!
@christophercollins34607 ай бұрын
That's a good review of the 572xp I agreed on the good and the not so good of this saw. I think it's a solid saw
@KevinsDisobedience7 ай бұрын
Seems great to me. A little bit jiggly, but I have tendinitis from concrete and plaster work, so I’m glad to have the anti-vibe, even if it means missing a few undercuts. I miss anyway lol
@novicelumberjack6 ай бұрын
Excellent video. I'd recommend keeping the stock filter. These things have about the best air filtration system you can get. Muffler mod is a must, imo. Will help it to shed heat and your saw will actually live longer.
@KevinsDisobedience6 ай бұрын
Glad to hear you say that. I just ordered a muffler and some air ports for the plastic filter cap, but I like the filter in this saw. It does seem like it should have more power. Hope the muffler helps.
@novicelumberjack6 ай бұрын
@KevinsDisobedience don't do the caps on the top either. I know it seems counter intuitive, but these things actually pressurize your intake a bit with air from the flywheel. Leave the entire air filtration system alone. Husqvarna did a great job with it.
@muhdharith2790Ай бұрын
Great review
@kurts647 ай бұрын
Nice! Merry Christmas mate. Orright. I'll admit it. Its a nice saw. Just needs to be orange, black and white 😎🤣
@KevinsDisobedience7 ай бұрын
I’m just the guy for this. I’ve no allegiance.
@z1berzerker7 ай бұрын
She sounds & looks good 👍 in the buck 😎 I like 70-90cc saws for the chain speed and power 🔋
@KevinsDisobedience7 ай бұрын
Yeah, those m-tronics crackle a bit without a load, but it doesn’t seem to affect the way it cuts.
@johnlincicum63907 ай бұрын
@@KevinsDisobedience I have a 572 full wrap handle bar I would sell you for $40 shipped using pirate ship. My zip code is 61028 in Illinois. It's new never been mounted on a saw. I bought one of those West coast kits for the gray clutch cover with the big bucking spikes for my Jonsered 2166.
@patricksullivan28167 ай бұрын
Merry Christmas, sir! Stay blessed.
@stephenhaney6617 ай бұрын
Nice review, i just bought a 572 a few months ago and really like it,i agree the felling dog is a bit small and id like to get a full wrap handle in the future
@KevinsDisobedience7 ай бұрын
If you do get dogs, just keep in mind you’ll want ones that fit the captured nuts.
@DaveCollierCamping6 ай бұрын
Excellent review
@KevinsDisobedience6 ай бұрын
Thanks, hope it was helpful
@DaveCollierCamping6 ай бұрын
@@KevinsDisobedience yes 👍
@brettbrown98147 ай бұрын
Nice! Merry Christmas!
@polderfischer85657 ай бұрын
Merry Christmas!
@KevinsDisobedience7 ай бұрын
Hope you had a great day!
@buddysumner40225 ай бұрын
Gotta love a husky,,
@johngrossbohlin75827 ай бұрын
I'm curious about your comment regarding the angle of the bar. Is the line between the labels Husqvarna and 572xp on the recoil starter cover lined up with the bar? My MS461 and MS661 have lines molded into, and on the 661 also painted on, the recoil cover that align with the direction of the bar. Perhaps the line on the Husky serves the same purpose, or is it merely decoration? I use those angle guides occasionally but the "top cut first, bottom cut second" approach I use lets me see where the bottom cut is by looking through the top cut kerf. At this point I very seldom need to adjust the aim of a hinge so re-cutting the top cut on rare occasions isn't an issue to me. RE dogs... I put big dual bumper spikes from a 661 on my 461 and put double bumper spikes on my MS261 also. I too like double spikes... I find that having them gives better purchase under more conditions.
@KevinsDisobedience7 ай бұрын
Not the angle of the bar, just that you can’t see the if you need to loosen or tighten the screw to get the clutch cover on, as the chain tensioner is on the cover.
@johngrossbohlin75827 ай бұрын
@@KevinsDisobedience I caught that... The point to which I refer was at about 9:34 where you were talking about bigger dogs keeping the saw away from the tree so you can see the angle of the bar. I took that to mean seeing the bar so you knew more precisely which way it was pointed. No?
@KevinsDisobedience7 ай бұрын
@@johngrossbohlin7582 Yes, so something I’ve learn from Bjarne is to pull the bar out slightly so you can better gauge where the tip is. Without the dogs, I have to stop and pull the saw out more and more often. Hope that’s clearer.
@johngrossbohlin75827 ай бұрын
@@KevinsDisobedience Yes, that's what I thought when you talked about it in the video. It's also what prompted my question about the line on the recoil starter cover... When your 500i arrives you will see that it has a "cross hair" on the recoil starter cover. One line is the traditional gunning sight and the other is so you can tell where the bar is pointed. I suspect that whether it points exactly to the mid line of the bar tip depends on the bar length... but it pretty much lines up with the bottom of the bar. Regardless it will get you real close without having to pull the bar out. I'll look at the Husky saws when I'm at the store where my son sells Stihl and Husky saws... I never paid attention to their lines until your video!😉
@lexiusnez65136 ай бұрын
Why do you change yer chain with the saw on its side??? It will be very easy to line the chain tensioner with the saw upright while changing the bar and chain.
@jbonesbonees45184 ай бұрын
Nice, what size bar is that
@georgedoolittle90157 ай бұрын
Swedish not Swiss. Make great dirt bikes too. Lawnmowers made in South Carolina. Think this equipment is made in soon to be closed Arkansas. Whether that means more good news for South Carolina or China hard to say. Stihl is Austrian and sadly making a big time move to China thanks to the Biden Administration which gives all sorts of free money to Austria which is taking that money and giving it to Iran and China. Great review.
@KevinsDisobedience7 ай бұрын
Thanks for the correction, didn’t realize I said Swiss. Swedes are good lads. Sadly cheap labor is hard to turn down. And we both know, Biden ain’t making many decisions himself these days.
@mrscuba16937 ай бұрын
that wood looks rotten
@KevinsDisobedience7 ай бұрын
Which one? Many logs there. Trust me, standing dead ash is plenty hard, even if the sap wood is a little pithy.
@garryaylward80506 ай бұрын
For the power overweight compared to the competition
@dujeamizic35887 ай бұрын
I woldent change anything. Bar and chain all original
@KevinsDisobedience7 ай бұрын
Certainly runs great like this, but I definitely want the dogs for felling.