Review - Doctor Doom Action Figure: Fail or Fantastic? - S-Hero 1/6 SH001 Doom Monarch

[@AbztraktMindst8]

I commented on your post on IG. Mine arrived the same way except for the knee piece. I was super excited for a Dr. DOOM figure. The broken pieces, the lack of wired cape, and lack of fists make me wanna scream. S-hero has replied to any of my comments or DM. I hope Hot Toys decides to tackle this guy.

[@KCtoysandfun]

That is a shame and sorry for the delayed response! I have yet to hear a response as well. Only the piss poor solution of sewing and gluing it back together. That post is up to 180k views now. Hope you subscribed and we hear from you again.

[@michaelcarey8388]

The gold things fell off in shipping with mine. Easy fix...Walmart sells little velcro circles that are exactly the same size as the gold things, so it's super easy to stick them on using them...

[@KCtoysandfun]

Sounds complicated and like a bandaid. I’ll give it a try though. Thanks for the comment.

[@michaelcarey8388]

@@KCtoysandfun It's a whole lot easier than trying to sew those damn things back on.

[@TheSamvadar]

Wish I had thought of that. Would have saved me the trouble. I actually took the time to sew them back on.

[@jp16k92]

Happened to me too when removing the fur collar. …soooo, took a page from sideshow Thor and put the buttons on snap buttons. Now things are easier!

[@KCtoysandfun]

Im confused but curious. What do you mean snap on buttons? This is a fix for this mess? Thanks for the comment also!

[@jp16k92]

@@KCtoysandfun press studs.

[@s3d17]

Its a disaster, actually I have been comissioned to repair 2 of these that why I am watching this review. Use sew on snaps in the spot for the gold medalions, it works wonders.. as for the recommendation.. yeah I feel like all the sellers these days think all sixth scale collectors knows how to hand sew or magically manufacture parts out of thin air. 😂

[@KCtoysandfun]

Yeah those might be the right words. Bummer! Thanks for the comment also.

[@s3d17]

​@@KCtoysandfunyeah half way through the review and I think I am gonna decline this repair project.. I say full replacement is definitely some they should offer for $250. 😅

[@KCtoysandfun]

Repair project lololol

[@s3d17]

​@@KCtoysandfun1/6 scale restoration 😅😅

[@capitano7778]

​@@s3d17 ma la spedizione non a spese di chi ha comprato e pagato 220 dollari 😢

[@HaydenCollectz]

Where’d you order your figure from? There’s still some in stock at One Sixth Outfitters and I’m thinking about pulling the trigger. This video definitely makes me nervous though.

[@KCtoysandfun]

I got mine from OSK

[@KCtoysandfun]

Id be careful but I think you also might enjoy it. Its a mixed bag.

[@HaydenCollectz]

@@KCtoysandfun I’ll be grabbing it after I get everything else I want.

[@dmurphine]

Thanks for the review. Scale is off. Doom in armor is supposed to be 6' 4". Cap is supposed to be 6' 2". Also in the promotional for the figure, I thought the cape was supposed to have wire so that the shape could be positioned. Too expensive for me for what the reviews seem to be saying.

[@KCtoysandfun]

I had a feeling the scale was off. He seems wayyyy too short next to Cap. Yeah, no wire, glue it back together, sew it back together, and more. Bummer of a release.

[@mams1701]

You can always tell younger guys when they collect. When I grew up in the seventies my Figures were megos. We had no articulation no detail we had screen printed costumes and no accessories. So to me to get something that I have to do a little bit of work on to make perfect when 90% of the heavy lifting has been done and I'm paying under $220 I have no complaints. If this was hot toys with their 350 plus dollar figures I guess I could see it but at this price point I can't really complain. But I guess to each their own.

[@marottamonster]

Hey good review, I also pulled the trigger and bought one as I thought "how cool, a Dr. Doom figure". Not a big fan using a magnetic neck and headsculpt, and my right knee armor piece also was broken and in the box. I was missing the chain that holds the medallions on his tunic/cape, and felt really uncomfortable trying to bend his arms at the elbows. The masks were also hit or miss [well the one "smiling mask" was anyway, the other one fit nicely]. It's unfortunate but I guess you live and you learn.

[@KCtoysandfun]

Wow sounds like the same experience! I’m totally bummed about the yellow gold pieces that fell off the chest. I’m sure there is someway to jimmy it back on but it just won’t be perfect.

[@kn3448]

The Mezco Dr Doom is far superior quality, comes with a shit ton of accessories and is cheaper. Go figure.

[@KCtoysandfun]

@@kn3448 yeah and isn’t it Diecast?

[@hydinbooks]

Just got mine in. Easiest way to hold the book is angled like he's holding it open and far away. I can drop a pic if it helps. Sorry you got a bad one.

[@KCtoysandfun]

Pic for sure. We have a group in the video info there is a link. I had a terrible time with mine. Thanks for the comment also! Hope you subscribed.

[@starXzen]

lol sheesh, well i was going to get this and the Mezco, but i guess im just sticking with the Mezco, DOOM is a Tall character, dudes like 6'2 out of the armor and 6'7" inside...so him being that short is crazy lmfao idk what they were thinking, yikes...

[@KCtoysandfun]

I didn’t realize he was that short! But yeah next to Cap, I did feel he was undersized. I will be grabbing the Mezco as well. Thanks for the comment and hope to hear from you again!

[@kn3448]

The scale is way off! Even according to Marvel stats, Victor Von Doom's height is around 6'2" and close to seven feet when in his armour. I think Cap is supposed to be around the 6'2"/ 6'3" mark as well.

[@KCtoysandfun]

Yup, I thought so as well. Thanks for the comment and info!

[@TheCollectorCave]

Man, I love mine. Didn't have these problems. My biggest complaint is the mask magnets make the masks too low and his eyes are too high up. I ordered mine from Giantoy and I've never had a problem. They have sent me parts for messed up third party figs in the past. Unfortunately it's a chance we take with third party stuff.

[@KCtoysandfun]

Yeah, I didnt order mine from Giantoy. Giantoy usually offers me a refund or replacement as they are one of the best to purchase from.

[@mrhay2u]

I'll wait for the hot toys one

[@피자맛난]

What does the inside look like if you take off the clothes of the product?

[@KCtoysandfun]

Just a sexy man

[@피자맛난]

@@KCtoysandfun Uh... I was wondering what the upper body armor looks like

[@Toytography]

Mine arrived with BOTH of the "knee parts" broken. :(

[@KCtoysandfun]

Nooooooooooooooooooooo!!!!! That is completely unacceptable. I was told to "Sew and Glue mine back together" lol! Horrible response.

[@ianr94]

Does not bode well for the iron monarch figure.

[@KCtoysandfun]

Nope, I’d cancel if I had it on preorder.

[@lacuevadelgriton]

Where you bought it?😂

[@KCtoysandfun]

[@kn3448]

I'll give you a tenner for it. You pay for shipping.

[@KCtoysandfun]

He is up for sale! Lol

[@markusadanitsch648]

Mann Stop whimpering Glue the Discs on every normal modeller can do this...figure Looks nice so where lies the Problem🙄🙃

[@KCtoysandfun]

lolol, whether this is sarcasm or not it is unacceptable to get something for $240 to arrived all messed up. In most cases someone would help you our or do an exchange.

[@willthebeast8002]

Disappointing. Doom is my favorite villain. I was primed when this was announced. This doesn't do it justice. Wanted to do a custom too. Boomer....

[@KCtoysandfun]

Yeah super bummed. More bummed at the piss poor customer experience I had with this one.

[@willthebeast8002]

@@KCtoysandfun EDIT: Bummer.

[@boxerxx951]

I saw a video like that I’m sorry mate that u got poor quality

[@KCtoysandfun]

Someone else had a piece of crap also?

[@Lord.of.Apokolips]

This figure is sure DOOMed

[@KCtoysandfun]

lol! I see what you did there. He was Doomed on arrival.

[@jmward4920]

I've never seen such an embarrassing figure review... It's almost in recall territory, the QC is like Sunday marketplace.... They should reach out to you

[@MasterRazzer76]

I agreed that figure not perfect but still greatful for what it is and you seem to get the worst of cases scenario with the figures you recieved from what i can see even from the previous videos.

[@KCtoysandfun]

Seriously, I did seem to have some bad luck. Like you said it looks good but just sucks it’s falling apart.

[@joseboris-ll8nb]

Stand Casey Jones face

[@KCtoysandfun]

It does look like Casey Jones lol