Review: Losi Mini-B: 2wd Buggy RTR: Part 2 - Onroad Carpet Setup

[@shhhhsecrethaha]

Good info👍

[@steel15172]

where did you get your ride height gauge

[@lawton70]

@@steel15172 I got it from a fb online shop. facebook.com/lcs.parts?mibextid=ZbWKwL

[@imTHE_INFINITY_]

What tires are on the front?

[@lawton70]

@@imTHE_INFINITY_ in this video i was using tje stock mini-b fronts. I think they are called bar codes.

[@kevinprice7620]

How did you set the ride height? I see the shock collars are down a bit, but did you add limiters as well?

[@lawton70]

To set the ride height I used that ride height gauge. I raised up the shock collars to lower the rc to about 13mm of ride height. At this point I did not have any limiters, but since this video I have added 3mm of internal spacers. The spacers are not lowering the car, but they do stop up-travel which helps it to not roll so much when turning.

[@evanheffley1625]

Limiters would adjust droop. Shock collars adjust ride height.

[@mojojoji5493]

If you have a mini t could you do a setup for asphalt ?

[@lawton70]

do you race a Mini-T on ashphalt? Or just running? A quick change is to move the rear shocks in top and bottom for more rear grip.

[@juldex]

Elle est d’origine ? On dirait qu’elle manque un petit peu de punchs. Mes elle est stable et régulier 👍

[@lawton70]

This is with the original brushed rtr motor. In this series I try all the motors that fit the losi buggy looking for more speed out of a brushed motor. It looks slow compared to the other mini-b with brushless motors in the track.

[@juldex]

Et là vous avez réussi à la faire monté à combien vitesse max sur cette vidéo ?

[@lawton70]

@@juldex In this video I used a Latrax 7575X 370 motor, It is much better than stock but still slower than a brushless. kzbin.info/www/bejne/o5mXaXh5p75jprc

[@juldex]

@@lawton70 j’ai remarqué aussi sur le miens mon mini B que je n’avais vraiment pas beaucoup frein et vous ?

[@lawton70]

@@juldex My stock esc / motor did not have very much brakes either.