Reviewing my 2019 Sportsman Highlifter 850 with the mods it has and some riding clips!

Just a small review on why I like my fourwheeler and what I’ve got done to it

[@JaimeMartinez-yk7bl]

I have the same bike as you. I think you should have made a video for installing the front bumper from the 1000 HL & winch. Make it a little bit of easier for us guys with the 850s

[@randycooper2135]

I got the 2020. Had a twisted rear yolk from factory that eats ujoints, my front diff leaks. Starter already locked up, and I had problems with my plugs under water. Fun to ride. Not fun to fix

[@kyleoliver2270]

Hell yeah bud love the videos I follow you on tic tok also POLARIS GANG🤘

[@rickmercs]

Kyle Oliver Preciate it my guy💪🏼

[@eliharris9923]

Polaris gang

[@runitwithcv]

I have the 2 inch bracket lift so 18s and 32s should be perfect no cutting what you think?

[@liftbiggetbig14]

When you mounted the winch to the bumper did you need a bracket or did the winch bolt right into the holes in the bumper? Just got the 1000 bumper for my 2020 850 just need the winch now

[@zackpike4778]

Those rims are 20x7? And did you fit those 33’s with the 2in lift ?

[@terrishackworth1619]

Where can I find aftermarket lug nuts for the Polaris

[@hondaboat900]

Hey I’m thinking about getting a Polaris should I idk if I should or not

[@cashisbell2497]

I got mine from shoals outdoors sports by the bridge

[@stevesadventures949]

Bro, are you at LACFEST in Georgia?

[@jlee1881]

Bro got to put an exhaust on it

[@jamesboyle473]

Looking good man. Would look even better if ya sat a Honda next to it 😂

[@rickmercs]

But Honda would make it be🤮🤮🤮

[@user-eu7my7fg8u]

Did you notice any difference after tuning it want more power out of my 1000

[@mathewsalas6348]

Hey man I have a 2020 850 highlifter , currently have a 2 inch bracket lift with 29.5 outlaws , you think I can clear 32.5 outlaws on the 2 inch lift ?

[@rickmercs]

Mateoz_ Vlogz most definitey. I’m clearing 33 BKTs with the 2 inch

[@maneshgavit5912]

Price kya he sar

[@highpsi8913]

Shout exhaust is stock right? If not then what exhaust is it and what do you recommend for exhaust

[@cohenb7695]

It’s stock

[@nicholasshannon3382]

No clutch work at all? No problems with the 33’s turning them it seems

[@rickmercs]

Nah you don’t need clutches until you get up to around 35s or larger. The HLs have a 40% gear reduction in high and low that allow them to spin bigger tires easily

[@McBrisket141]

I have the 1000 highlifter and just ordered to 2in bracket lift for it and I couldn’t imagine clearing those, how in the world are you clearing those tires 😳

[@el.cochiloco..23]

The cat bought me

[@cadenmiller1968]

You should get an RJWC or Big Gun exhaust they both sound great on it, I have a big gun.

[@rickmercs]

I’m going to end up getting RJWC. I like the sound of Big Gun but I’ve heard they don’t last long

[@cadenmiller1968]

@@rickmercs I’ve had mine for about a year now and and like every other ride makes a weird sound then stops and sounds fine after but its probably about to time for me to switch exhausts.

[@rickmercs]

@@cadenmiller1968 I’ve heard the mounts fall apart real bad and the packing don’t last long at all. Could just be a few bad apples but never know. Might as well do a bit extra and get a RJWC. But I do love Big Guns sound though

[@cadenmiller1968]

@@rickmercs My mounts never fell apart, and it runs good, it’s just every now and then when it makes a weird sound like it wants to cut off but stays running at the same time, it’s a really weird sound but it’s fine after, But I think RJWC is the way to go

[@mannyarvizu2840]

Hey brother have you had any problems with your starter at all?

[@rickmercs]

Yes. Twice actually. The first time I was able to clean it and it worked fine for a year. And just recently it went all the way out. I actually have a video of how to clean it and stuff that I’ll be posting soon

[@jmawesome2580]

If you couldn’t have a Polaris what brand would you go with?

[@rickmercs]

Canam...and if I couldn’t have CanAm then I’d have nothing

[@jmawesome2580]

Rickmercs cool thanks

[@CHRISB-cb5to]

Yamaha.

[@ryan13johnson]

How’s it idle underwater?

[@RennyBoyz1]

My High lifter used to sputter under water until I put some dielectric grease on the spark plugs and inside the boot and it runs great under water. kzbin.info/www/bejne/m2nFYp2cf51lnrs link to my page if you wanna see it getting down.

[@sshmedium5092]

Did you have to add spacers?

[@rickmercs]

Nah if you get some offset wheels you don’t have to. If you do the 2inch and keep the stocks wheels/tires you’ll have to because they’ll run your snorkel tube.

[@crypt1386]

i bought my 2018 polaris sportsman 450 ho utility from there

[@tennessippiriders2129]

Hey does your clunk when accelerating?

[@rickmercs]

It does make a slight noise on the first part of starting but after that you shouldn’t hear anything. If you hear a constant clunking it could be your Ujoint or an axle popping

[@tennessippiriders2129]

@@rickmercs after 15 miles, its brand new

[@rickmercs]

@@tennessippiriders2129 I mean it’s possible lol it’s more than likely just normal noise from the rear diff. Mine does it all the time.

[@tennessippiriders2129]

Yeah. Figured that out already. Still good machines

[@nathanwilliams6802]

Hello Nathan

[@keithwyatt1234]

I follow u on tik tokbro

[@williammcclain2275]

Kitty !!!!!!!

[@ZaneWooten]

I promise that cat doesn’t care about that ATV...or any other ATV. In fact, that cat doesn’t care about anything.

[@rickmercs]

Wow you’re so woke dude

[@ZaneWooten]

@@rickmercs Just poking a little fun. I’m not a troll.

[@delveckiogotstatus1599]

Dude… you don’t workout lol

[@rickmercs]

Workout 5 days a week,Just don’t eat right🤷🏻‍♂️

[@delveckiogotstatus1599]

@@rickmercs I was joking bro. I really enjoy your videos. I can see the weight lost from your older videos. Keep up the good work!

[@rickmercs]

@@delveckiogotstatus1599 like I said,I don’t eat right so that weight done come back😂😂but thanks buddy I appreciate it!

[@delveckiogotstatus1599]

@@rickmercs no problem!