Sir, I am very thankful for your tutorials. I was tasked in my company to create parametric families in revit for their equipment, thanks to your video I not only performed, I also exceeded all expectations.
@BINHE615Ай бұрын
Thank you for letting me know. Comments like yours are the reason why I am still here.
@Joy-kg4nf5 ай бұрын
your practices have been so helpful, sincerely, thank you very much :)))
@lihlenjena5057 Жыл бұрын
This is a great exercise 💯💯. Could you please do an exercise where you model the curtain walls as well.
@Y1EL Жыл бұрын
Keep making Revit videos like this. Awesome job
@sherwinespejo124 Жыл бұрын
Amazing! Starting to be a fan!
@everythingeverybody65266 ай бұрын
Thanks for teaching.
@kitsonng103 Жыл бұрын
Thank you so much. 学到了太感谢了
@semion1379 Жыл бұрын
You ROCK ! Thanks
@maha49756 сағат бұрын
Can i make this but using the "spline through points" instead of the regular spline??
@samoxflox9261 Жыл бұрын
Nice and straight forward …. Good job Bin 1. Would it makes any difference if the path was a spline thru points ? 2. The issue in reference lines profiles vs not-reference lines is : although you can still edit the profiles at the ends of the form , but you won’t be able to find the profiles in the middle (u think it’s possible to insert such profile compacted profiles with many arcs?) 3. It would be great if u can one time show us (as u can see in the picture in the narrowest part) the transition from the straight part (the profile consists of almost 3,4 straight lines) into 3,4 larger arcs then 3,4 much larger arcs etc.
@BINHE615 Жыл бұрын
1. I think the result can be very similar. 2. You can, you need to hover the cursor on the profile and it will appear. 3. All the lines here are arcs, we copy (CC) and scale (RE) to create all the profiles, remember?
@OSpics5 ай бұрын
Great Bin. Thnx. Is it possible to categorize this mass as Generic Model so that we can change different categories in it later on? If yes, how?
@BINHE6154 ай бұрын
Depends. If you model this as an adaptive family, you can change the category to some other, but if you model it as a model in place, I don't think you can change it.
@beaalfonso-r7s8 ай бұрын
how can i adjust the base offset/height of the whole massing? because the mass is too high / very elevated to my liking. thank you!
@cathychoi6959 Жыл бұрын
Hey Bin, thanks for your tutorial, always learn things from you! currently I have a large scale battens ceiling in organic shape,(from contractor bim team, but then model is original dwg), just wondering if I can mass a roof basic on that battens ceiling ----like you did here. Thanks!
@BINHE615 Жыл бұрын
It's hard to say without any images or diagrams. Could you please post them on Google Docs?
@MohammadHaizat4 ай бұрын
Thanks for the tutorial sir.
@holdurhorse91499 ай бұрын
educational! Thanks
@tareksabra3891 Жыл бұрын
great video as usual bin , your videos are amazing and to the point. i have a question please : icant do a closed Spline in revit , do you have any idea?
@BINHE615 Жыл бұрын
No, it is not possible in Revit.
@yacinechakour54473 ай бұрын
THANKS MAN VERRY HELPFUL 👌
@wsamagubarah3209 Жыл бұрын
thanks a lot for the tutorial
@zoekoffi8983 Жыл бұрын
Thank you. Where can we send you suggestions for youtube videos ?
@BINHE615 Жыл бұрын
docs.google.com/document/d/14UDBuC-dM-GcAC8kh2MKaKFt8cScus_ZTA1t7cEvYM0/edit Here
@zoekoffi8983 Жыл бұрын
@@BINHE615 Thank you
@minyoonlaa8448 Жыл бұрын
Thank you
@waelch Жыл бұрын
Thanks!
@sangwanbimchannel Жыл бұрын
Very amazing tutorial. ❤❤
@benyahianafi4097 ай бұрын
thank youu this really helped alooot 💖💗💗💖💖💖
@hypebruhh175 күн бұрын
hello, I.ve created mass and tried to choose window section but It's choosing whole mass not one section, how can I choose one section of whole mass
@BINHE6155 күн бұрын
Have you tried using Tab to select individual surface?
@فيصل-ش7م2ت Жыл бұрын
Thanks ❤❤❤
@rashidsawant Жыл бұрын
GREAT
@starshipsolar10 ай бұрын
How do you give this a thickness?
@BINHE61510 ай бұрын
You can place roof/wall by face so you can control the thickness by roof/wall type. Alternately, you can use closed loop as profile so you get solid mass instead of surface.
@sayeh741 Жыл бұрын
Thanks ♥️♥️♥️
@zena-te2ee7 ай бұрын
is this just impossible now? I get a self intersecting geometry error no matter how I try to do a profile sweep :(
@BINHE6157 ай бұрын
Try starting with something simple first. For example, you can create a straight path with multiple points. Once the surface is created, you can adjust the points to change the shape of the path.
@zena-te2ee7 ай бұрын
thanks for responding! I ended up figuring it out, the spline was too sharp for the size of the profile. @@BINHE615
@zena-te2ee7 ай бұрын
great advice will definitely need it@@BINHE615
@r7mamousa633 Жыл бұрын
hi ben >>I followed all steps and repeated them>>whenI reach to creat form it gives me a massege AND it didnt work>>what mistake may be i made?
@BINHE615 Жыл бұрын
First, try creating a form using the same profiles along the path. Then, adjust the profile as needed. You might find this approach helpful. Sometimes, it's necessary to start by including only part of the profiles in the form and then gradually add more profiles into it.
@rachaelkunda4631 Жыл бұрын
Hello, i wanted to ask if you could make a tutorial where you make a plan and add a mass to it
@BINHE615 Жыл бұрын
Model in place mass on an existing building?
@rachaelkunda4631 Жыл бұрын
@@BINHE615 yes please
@tareksabra3891 Жыл бұрын
can you do a video for merecedes benz museum in stuttgart ?
@BINHE615 Жыл бұрын
I'm afraid it is more a Rhino project.
@thu58054 ай бұрын
how to make it in a close loop shape?
@BINHE6154 ай бұрын
Unfotunately, Revit does not support closed spline, but you can try creating it using 2 splines, and place profiles on each spline to create separate forms.
@wilson.a.414710 ай бұрын
HEY! i really need help Asap! i have tilted wall that should be glass panels, its a triangular shape. i tried mass but i couldnt add glass panels. its just a big block of glass, i tried family like you stated, couldnt work because it was rectangular, and the mass isnt. I really dont know how to do this. plz help! i also tried usin: wall-curtainwall-draw-pickfaces. didnt work. edit: i can provide ss.
@BINHE61510 ай бұрын
You have different options. 1, sloped glazing: model it as a sloped glazing(roof) with footprint and slope arrow. This should be the easiest if it works. Option 2, use model in place mass, place 3 points on the corners, connect then using spline through points, then create a surface using these lines, after that, you can either use divided surface with pattern based family in the mass, or place curtain system outside of the mass. Option 3, you can also use model in place generic model, and place roof by face on it, this might not work with sloped glazing. If you still not sure how, post it in the the file and I’ll get back to you.
@wilson.a.414710 ай бұрын
@@BINHE615 thank you, it worked!
@broszillagaming3120 Жыл бұрын
❤❤❤
@Loly-pu9vm15 күн бұрын
I LOVE U XOXO
@reny_1987 Жыл бұрын
Can you send sample
@ahmedelmogy2804 Жыл бұрын
can you share the model
@BINHE615 Жыл бұрын
Sorry mate, I didn't save it. Follow the video and I am sure you can do it yourself.
@73p3ro Жыл бұрын
Is there any credit to the concrete and structure engineers of this work or did they just remember the architects? All you hear about is Zaha Hadid!
@BINHE615 Жыл бұрын
Agree.
@programing38098 ай бұрын
Don’t eat and play with your mouth while you talking in the video please 👍🏻
@BINHE6157 ай бұрын
:P
@cette.cacophonie4 ай бұрын
Omg the saliva noise is so annoying
@beaalfonso-r7s8 ай бұрын
how can i adjust the base offset/height of the whole massing? because the mass is too high / very elevated to my liking. thank you!
@holdurhorse91499 ай бұрын
educational! Thanks
@atwenagoody1038 Жыл бұрын
Thank you
@beaalfonso-r7s8 ай бұрын
how can i adjust the base offset/height of the whole massing? because the mass is too high / very elevated to my liking. thank you!
@BINHE6157 ай бұрын
The best way is to adjust the shape of the profile, the surface/mass will adjust automatically.