Revival of a $1000 KX250 from Start to Finish

[@grantduininck6238]

6% + 1 individual enjoyed that shot. Commenting on Jani's behalf

[@lassekirketerp2837]

+1

[@nicholasdamico8009]

+2

[@zkaos_Karlos]

+3 no homo

[@maxmusterman612]

+3

[@9u13t]

+4

[@Mike_B_724]

All my fears about buying a used bike, all rolled into one video 😄 Great job on the rebuild.

[@KincadePavich]

Hahah thank you!

[@holymacarenafin2319]

Haha i buy used bikes with intention to open then up straight away. While checking If it run good but mostly i check shocks and lingages. Those are good i take it. Never trusting someones hours on piston storys.

[@bve7397]

He has the garage, the body and the brains! Love you dude, hoping to be doing projects as such on my own someday, sadly deals arent as good around here.

[@SkillCollectors]

Man that glass/sandpaper re-surfacing trick is money.

[@dylansmith6364]

Smooth counter tops work good too!

[@codycegla6065]

I'm auto tech and I appreciate the great workmanship that you do and the videos that you put out. Have ever thought doing what to look for video when buying a used bike?

[@KincadePavich]

Thanks a lot! Truthfully I haven't really, I feel like there's good content available for that, but I may take it into consideration!

[@Cartduckmann]

You should! It’s great to hear different opinions!

[@MultiDragola]

​@@KincadePavichyeah I'd rather you focus more on in depth rebuild stuff like transmission/engine work along with electrical.

[@notthat1130]

@@KincadePavich I highly request this video, im currently looking for a trail bike and a project bike . I’ve been watching your videos along with some others, trying to educate myself on how to work on bikes. Myself and Im sure many more would highly appreciate a video talking about what to look for when shopping for used bikes . I’ve seemed to find a lot for a good price that say they run good but how do I know I’m not gonna run into issues like these such as previous mechanics making non beneficial add ons/repairs. Great videos keep it up!!

[@Dirt_Breaker]

Pro tip, when resurfacing a cylinder try to go in an infinity symbol type pattern to avoid shaving too much off from one side, as you’ll find your fingers might weigh down one side more than the other. Also, make sure to regularly clean your sand paper, the shavings can build up and glaze the surface, reducing the bite on the gasket. Love the rebuild, not to much or to little!

[@matthewmansfield2384]

We've had a few '02 KX's. That year is really the best of all from '97-'06 - best motor character for sure. A "must do" however, is to put '03 triple clamps on it. Makes it a whole new bike that can actually turn with the front. A friend who was a race mechanic gave us all the goods on making KX's haul, so we implemented a few of his suggestions with great results...

[@motomatt3763]

That CR is definitely an old crusty deamon of the dirt.... Looking forward to what you make out of it. KX is dope!

[@KincadePavich]

Thank you!

[@damxn7345]

21:26 some people may not agree with me on this but when im working with stuck hardware on the vice i smack the vice handle with the mallet or sledge gets those seized bolts every time

[@corbinolsen12]

Watched each individual video on this build and gotta say the full build video was just as awesome. Liked the commentary through out on this one. Looking forward to the next project! Honda 😮

[@KincadePavich]

Thanks so much for following along!

[@dethamselv5482]

Great to see some ones project is going nicely along. My fram and engine just fell down after i painted so i’ll be starting alllll over again

[@KyleHuff-t7u]

Rad!!! Happy to see you use the old style plastics for this kx. I would definitely race this bike!!

[@shannonjurgens3667]

Yup! The project that is too big to fail! You did the right thing. You upped the resale value.

[@tomatoknuckles]

Even tho I watched every episode, i enjoyed watching this again. You're a good dude and you have a great eye for making bikes look great. God help you with that CR tho that's proper roached, haha. Look forward to the build.

[@KincadePavich]

Thanks so much I appreciate your support and comments!

[@vengeance2061]

before and after is so peace and satisfying love this man👍

[@rossilake218]

Hi, Use 1/4" to 3/8" green tempered shelf glass. Make sure is is on a perfectly flat surface. I use an old counter top. You need copper jaws on your vice. I'll make a pair for you. I have that (20) vice/s..Great job on the rebuilds. I'm 62, Hobby machinist. I'm looking for a Cr250r late model. I had 3 and sold all of them, back in the day. Urrgh! Serb or croat? Redbud is our track.

[@vincentwobb9919]

If you ever have to cut a sleeve or even a bearing off, cut it with a die grinder but don’t go all the way through, then take a cold chisel to your cut and it’ll usually split along that cut and won’t damage the shaft, I use this all the time at work.

[@sombatone]

This was absolutely awesome and best work done... the bike looks so amazing

[@memorris2]

Bro, i had a 96 xr600r that was street legal when i bought it in 2015, and 90% of the spokes wouldnt tighten or loosen. I was broke at the time so i just rode it anyway. The rear wheel ended up exploding, cracking the wheel and luckily i was only going about 10mph in a turn. Lowsided and even with jeans on my entire shin was skinless! Always check old wheels and spokes!!!!

[@memorris2]

It actually might have been a 93 xr600r now that im thinking about it haha

[@KlineBuilt]

iCat spark enhancer is what the component installed in line was. We used them on my 85’s back in the day and it would make the spark plug so hot it would embed the electrode into the top of the piston. Not from hitting it but from heat alone

[@CNNECTCTRAL81]

My dad owned the same KX when I was a little kid, you got me inspired to something similiar :D

[@ChadJorgenson]

Some nice tips and tricks I'm going to use on my '00 KX250 ... though I actually love the raw aluminum color of the wheels, I hate the black on my new bike. 😀Love that case sticker, I'll be grabbing one of those for sure.

[@tristanc150]

I love your restoring videos!

[@KincadePavich]

Thank you!

[@batonchik25]

Such a great pleasure watching your videos! you've made an Awesome Job man

[@graememilne4202]

That kx looks like a new bike,well done on that job. Cant wait to see the CR gettin done,looks like a lot of work needed there but your the man.

[@KincadePavich]

Thanks a ton! Stoked to tackle the CR!

[@graememilne4202]

@@KincadePavich Cool,got 1987 CR250 im just about to get stuck into as well. You got a good thing going on here,please keep it up,you only have to read a few comments to see how much folks are enjoying them. :)

[@MAKB187]

On carbs buy a blaster and use baking soda in it just a hand held blaster works well

[@whatisaray]

Best part of the video is removing the kickstart lever 😂 good work I wish I would have documented my build like this.

[@KincadePavich]

Took so long hahaha! Thank you!

[@carlmarquardt994]

Incredible ​@@KincadePavichamazing dedication mate...how many hours do you spend on something like this? And do you get your money back plus a profit on the resale? Is there a big market fir vintage MX bikes in the States? Your workshop is always very clean...seems like you love your work well done

[@Grunzaa]

Love the bench grinder on the outdoor glass table 🤣🤣

[@brettlaage9687]

Man that thing looks amazing! I can’t wait for the CR. I’m building a 2002 CR125 right now.

[@KincadePavich]

Awesome, and thank you!!

[@Adjust-Fire-jy3dy]

I have to say this is about what to expect every time you buy a used 2 stroke. I have done it many times. The fact that I love doing it doesn't justify it in my wife's eyes though. Lol.

[@PsGamer-fz8uw]

Absolutely stunning

[@tebow3068]

I just bought a 94' kx250, i have a similar isuue with the top end because the walls have been worn down so ill have to get a whole new big bore kit otherwise it'll keep burning up my oil

[@jameic5111]

nice work However noticed when you put grease on stem bearings You should watch a video on packing hub type bearings You will be surprised on how much grease they use.

[@lawrencefranck9417]

Try penetrating oil. Liquid wrench makes good stuff that will dissolve rust almost instantly. I use aerokroil if I can get it.

[@IAmPiernik]

Girls, 7:20 You're welcome! Love it 😂😂🥵

[@martyross1573]

Can't wait for the CR. The black looks mean :)

[@nuthintoprove]

Every time I buy a used bike I plan on at least what you did? Nothing here surprised me!

[@grudzien9784]

I don’t know about you, but the clips I think are the hardest to install lol. The 65 sx I did it took me forever to get the in correctly. Not to mention I lost those little clips at least 10 times and had to look for em. So frustrating

[@2stroketyson79]

you can use a PVC pipe for the steering stem bearing too

[@JM-wy6sq]

Looks awesome man great job!

[@07murdoc28]

That is one 10/10 bike for sure!

[@gtgodbear6320]

I've been hoping I could find a cheap 85cc to restore. Honda, Yamaha or Kawasaki. They have always been my favorite size.

[@KingFriday274]

Wow. Inspired to go wrench now. Great work

[@michaeltyris3249]

I think you need to invest in an ultrasonic cleaner for your carbon stuff or anything else engine wise tbh, easy and gets into every single nook and granny!

[@lorenzohuerta8701]

Man as someone who would literally kill to own a dirtbike i love watching ur restoration videos learning the ins and the outs of them one dayy ill be fixing up my own 🤞🏼

[@lorenzohuerta8701]

@Message-M6 wait is this real

[@KincadePavich]

Thanks a ton, I believe you will! And I see you response - no, I will never notify anyone of a bike giveaway via KZbin comments. You gotta be careful of scammers!

[@lorenzohuerta8701]

@@KincadePavich yea i kinda figured got really excited but figured it was too good to be true 😂😔

[@KadeTurner]

Really good video mate, lot of work gone into it. Makes me miss my 250. Wish I never sold it.

[@markgunning1878]

omg that was very good keep up the hard work thank you very much

[@Ernbern124]

damn next project is clapped out.... Please keep that shred decal or re do it. Looks badass.

[@KincadePavich]

Hmmm... Will consider... :)

[@jacobEstammel]

finally !!!!!!!!!!!!!! a sand blaster

[@kenweis7913]

That takes serious commitment

[@ryanharriss7950]

That tyre remover is pretty good.

[@SLAYJUCE]

YYAAATT!! I want an 04!

[@Ridefastorgetpassed]

Next time prepack those stem bearings with a bearing packer then tap em on. I also wipe a little grease in the cup/race.

[@40mmmikemike]

Theres always some valuable information in these videos for people who like to work on things. I was thinking it might have been better finding a brand new coil instead of that old one for that price.

[@tomrotella6273]

Really enjoy watching your videos. Great insight for when I finally get a bike lol 😂.

[@KincadePavich]

Thanks a ton!

[@rockman49er]

This is an awesome bike a couple years newer than mine 😀 is that monterrey California 😮

[@KincadePavich]

No sir this is Montana haha

[@augieh6146]

Those Kawasaki Japan stickers mean something bro. If you know you know. That was probably a serious racers bike back in it’s hay day if it’s sporting that sticker on the shock

[@KincadePavich]

Interesting!

[@kushpaladin300]

looks like that axle nut hasn't been greased in a very long time. i do it every time i change the tire, i thought that was common knowledge. i have the 4 stroke version ('05 250f) i abused it heavily when i was a teenager. would love to buy new parts for it but parts are getting hard to find

[@garethjohnstone8662]

Must be satisfying to do this. Makes me want to get an old 2 banger and take my sweet time over it. If I can even break even on a sale, I'd be happy. I used to be a welder and metal finisher/polisher so, I have a few skills to call on and friends that still work there could come in useful lol. Even have a powder coating oven that could do frames with. Maybe one day..... The ONE thing I don't like or rather, like less, is the black rims on modern bikes. Prefer gold or bronze personally or silver. Gunmetal would look cool.

[@Camaron9769]

man this makes me miss my 2013 yz250.... shoulda never sold it

[@KincadePavich]

There's always another one

[@Menniti_129]

im excited for the honda i know your gonna build a sweet bike!

[@KincadePavich]

Thank you!

[@jcrr1972]

I wish I have the time, tools and knowledge to this, great job!!!, wonder what the original owner is thinking now.

[@jonleecollins1480]

Every bike I buy is in this condition too 😂 great build 👍🏻

[@sickunit2096]

Ive used that very same shop vac extension to drive MTB fork bearing races 😂

[@Alfoy57]

I really enjoy watching your videos.

[@kenweis7913]

I love shinko tires for the price and performance

[@Newmanrides]

Love this build ❤

[@friguy4444]

Wow dude!! You've got a Hockey net??!! MAN!!

[@KincadePavich]

I play adult league hockey here!

[@CrewZimmerman]

It was a awesome build

[@The_FrenchFrie]

where do you find all your broken down bikes

[@KincadePavich]

Facebook and Craigslist. Occasionally friends or word of mouth.

[@josephsworld1886]

Love the number you chose. (406) That’s my race number. 😂😂

[@jz64]

Great job the bike looks beautiful

[@MegaQLDER]

U had me at kx 2 stroke. But the shot of the rig?, haha😂

[@aydendion6912]

How did the paint hold up on the rims. I’m tempted to paint mine but question the durability

[@jacap1sr]

Let's just replace everything while we're at it. I applaud you.

[@brianhuman2218]

Loved this series man! 🔥

[@KincadePavich]

Thanks for following along!

[@brianhuman2218]

@@KincadePavich can't wait for the next one

[@Vexorgthedestroyer]

This was an amazing project, great video. The only thing I don't get is why you didn't strip and pain the frame, you said it wasn't a priority, but it really wouldn't have added much to the significant amount of detailing you did, and definitely would've popped. Nevertheless, sweet bike man, great work!

[@KincadePavich]

Stripping a frame by hand with factory paint is nearly impossible to do right. I can't fit a frame in my cabinet. So I'd have had to pay someone a couple hundred bucks to blast it, set me back another few weeks, etc. Just was not high priority on this project. But I totally understand why everyone wishes I did haha.

[@theladdiesda8190]

A bristle blaster might be worthwhile tool to invest in for stripping frames without using blasting services.

[@nathancorlett9895]

Great vid m8 what was the total money spent on bike thanks

[@ginos5081]

how did you biy the piston without knowing the cylinder diameter? simply took the same size as the one that the bike came with?

[@joelboutier1736]

beautiful bike. sometimes the cheapest bikes are the most expensive

[@ccooper04]

What’s the turn around time for millennium technologies? I just purchased a 2001 kx250 and the jug doesn’t look bad but thinking I should just send it to them along with the rotating assembly to let them rebuild it all so it’s all matching.

[@KincadePavich]

Can be around 8 weeks I believe you can pay extra for expedited

[@RedBeard6GT]

I bought a what I thought was a 2004 KX 125 turned out to be that but it had been built with about four other 125s

[@marafade13]

Music choice for the assembly ❤

[@candlautosaleslopezmunoz]

Thanks for that! now my girlfriend is watching your videos and sent me to the gym

[@ODRoach]

always RAD my dude! Keep it up

[@KincadePavich]

Appreciate it!

[@2015monster]

Where do you get your prime Mx wheel?😁

[@AR-798]

Nice work man.

[@BigBisalreadytaken]

I'm curious as to how many hours labor you have into this and the final costs (retail) of all the parts. I live in Asia now and doing something like this would be impossibly expensive because of shipping... Sigh.

[@no-namecrown5510]

I have a 96 KX 250 and I'm looking to replace the OEM triple clamps with aftermarket billet. I'm in Australia and can't find a supplier. Any USA suggestions? You guy's have the best products.

[@sakisSAVAGER]

I love your work brother!!! Keep it up

[@KincadePavich]

Thank you!

[@RedBeard6GT]

I love your vids man I’ve been in love with kawi 2 strokes since I could remember and will own one soon wanting a 04 or 06 250 anyone in the comments have any tips and pointers maybe something you ran into a bit while owning yours

[@prcaroo1]

Y did you not make your own hangers 😊

[@rockman49er]

I got a revived 98 kx250 free ninty free from my son in law Chevy trucks graphics and lots of goodies all blinged out

[@rockman49er]

Is this monterrey California

[@troyphillips719]

How long does a build like this usually take?

[@RoyneilHermosura-x9h]

I love your restoration bike😊

[@victorbright4068]

I would love a restored bike great job

[@spiritofogun5583]

Excellent work bro

[@upsideways]

New subscriber here. Loved this clean-up. Looks amazing

[@calebjohnson5537]

Where did you get your new plastics and sticker kit from?

[@KincadePavich]

DeCal Works

[@chasebenzing7824]

Man, love the bike, just rebuilt my ktm250, nice job!!

[@KincadePavich]

Awesome! And thank you!