Reviving my RHD Integra with Junkyard Honda CRV and Prelude parts

This right hand drive Acura Integra was actually my first car! It has been sitting for a while and I need to revive it. A junkyard run secured much needed parts from a Honda CRV and Prelude.
Ending Music:
Thisistoodifficult: Control
PrizzaMerch:
prizzamike.myshopify.com
Become a Member to access perks:
kzbin.info/door/KTbRoHywCs9UjyqPCmaFtAjoin
What's next? Check out this playlist to continue the story of this car!
kzbin.info/www/bejne/Y4HZdoFsid6Aqbs
For more behind the scenes:
Instagram: prizzamike
TikTok: www.tiktok.com/@prizzamike
Snapchat: @prizzamike
Discord: discord.gg/Fcx5yBPpwU

[@samithaweeraman1882]

Dude love how detailed you are, this is what all other big KZbin channels are missing these days. Been a a fan of yours for a while now! keep them coming!

[@chubby6961]

He definitely is but he should have cleaned off some of the rust

[@PrizzaMike]

@@chubby6961 wait, what rust should I have cleaned off? I'm so used to working on rotted cars that I felt like I barely fought any rust in the video 😅

[@yomamaisawhore2141]

@@PrizzaMike I have the Integra type RX. And just like every entire man what a pain in the ass when it gets messed up.. had too replace a few parts. I like your integra jdm front face r the best. I have jdm integra type RX. Champion ship white rhd I love it.. Love yours also really nice integras I had a ls

[@therestingmitchface6241]

Seth’s reaction to the rubbing killed me😂

[@altoncaldwell2361]

Fr that shit was great i watched it like 5 times

[@kawaiirunnersdriftclub]

I would have a similar reaction to that same noise hahahaha

[@panospapadimitriou3498]

no money for another set of fat wheels . let em rub no worries!!! . i used to sound especialy when lock reversing!!!! almost ruined whole panel

[@jeremiahgarcia8861]

brooo putting the jack stand to help break the axle nut is so genius!!!!

[@josesanchez-ln8ec]

Next time, press in base model rsx wheel hub and bearing. It’s 32mm. Then you can use your stock axles.

[@PrizzaMike]

RSX is 36mm

[@josesanchez-ln8ec]

Type s is 36mm. Base model is 32mm. I’ve done it. The crv and base model rsx have the same hub bearing part number. That’s why you can use the hub bearing and wheel hub. I have this set up on my del sol.

[@HannahFortalezza]

That crackless dash ending 😆 You’ve hit gold!

[@Xully]

You know damn well he took that dash from that 240😂😂🫡

[@PrizzaMike]

😅

[@calvinwasson7663]

When you are about to leave the house and prizzamike uploads…plans change

[@asosa7100]

The 240SX at the end thanks again for lending me the tools so I was able to remove the calipers for my brothers 240 🤙🏻

[@cameronclark3418]

I’m a simple man, I see integra I click. Glad to see some more teg content to break up the 240 build! Gives me motivation to finally finish my teg

[@stupidfuhk1705]

I really love your channel. Music taste on point, cool cars, super informative while not making it complicated.

[@andydhillon1977]

Good info. Just s few things I noticed in the video I'll help clarify. The Prelude Type SH isn't 4 Wheel Steering. Only the 3rd and 4th Gen Preludes came with 4WS. The Type SH has a basically an electronic "limited slip" transmission. The reason why the Axles aren't the same length is because the transmission is in one side of the car, so there's a need for an intermediate shaft that installs on the back of the engine Also, the "Type R calipers" are the same as the CRV, 4th and 5th Gen Accord wagon, and Acura CL. Fun fact. The front rotors are the same in the Integra Type R and 5th Gen Prelude. The rear rotors are unique to the Type R though.

[@JustRobertCZE]

4:30 Mike: Good Old Popups. Pontiac: **Cries** (it does, look closely at the headlight)

[@PrizzaMike]

😭

[@tacogamingnetwork7936]

Bro you making the end of the video with that 240 having the crack-less dash has got me so hyped for the next video

[@LamontAtLarge_]

👆👆Thanks for great subscriber.💓 I have something for you 🎉 message me with the above name on telegram for your prize

[@tacogamingnetwork7936]

@@LamontAtLarge_ Bruh ain't nobody falling for that shit, you're smelly

[@ReverseSylver]

25:22, Man you are a genie, you rebuilt the 240sx from the ground. I remember watching the video where you still had the car in pieces and to think that those metal pieces are now a fully driveable car is just mind blowing, I don't think a genie could do that but you certainly can! Keep up the amazing work Mike❤️

[@Fxytality]

It’s 1am but I gotta watch…

[@dubiousf00d]

Damn homie! Where!?

[@seemee123lol7]

bro its 8 where i am

[@Paul_Corollo]

it’s 6pm

[@jordangarneau3022]

Yea its 8:15 in ontario canerda

[@sampuhhupmas5666]

3:22 AM here, I gotta wake up at 6. . .

[@eazybuilt]

THIS is the reason why i tell the young crowd to get into hondas first! it’s literally legos to be OEM+!!

[@PrizzaMike]

Right! Teaches you fundamentals of building cars in my opinion! 🔥

[@elroyscheepers6306]

Your videos just has that x factor almost like a chris fix asmr version 😅 motivating the average Joe to tackle seemingly impossible or difficult tasks love your channel

[@Owensti]

Love the junkyard videos!

[@crystalzues4712]

Good to see every car is getting some love.

[@lamarrox5929]

The interior of the 240 at the end of the video is in good condition, my first reaction of seeing the dash without cracks was the same as your. You're an engineer by the way you work and solve the problems of things not fitting or working.

[@mattketner7597]

9:15 dude, that’s so damn smart to use a jack stand. I’ve slipped off a bolt and punched a steel bumper with the back of my hand. Split it right open and bled everywhere. Good ole knuckle buster.

[@Cobra_427]

18:00 Reminds me of the time I had to shave some nubs off of a valve cover gasket for my 2006 Mustang, I had bought a new valve cover for the passenger side because one of the ignition coil bolt holes was cracked, Ford revised the valve cover in 2008 to use 8 bolts rather than 14, but little did I know they also changed the gasket slightly, the 2006 gaskets have 2 little nubs that go on the backside of the valve cover that don't exist on the 2008 one, but besides that the gaskets are the same so I simply cut those 2 nubs off and it worked, it's going to be weird having to cut those nubs off of the passenger side gasket every time I need to replace them though

[@ryan302turbo]

bro the rust lol man i love how you dont let it bother you

[@jaymelodyanimations9211]

im so happy to see the 240 drive ! you did a good job fixing it.

[@the-real-big-vic7359]

Hey it not done yet the 90 percent of the build is in the final 10 percent

[@prettykewldude]

Now that the car is running i think you should do a story about it 🙌🙌

[@PrizzaMike]

Will do! I'll start looking for all the old pictures and any videos I might have (8 or 9 year build)

[@JohneyWalker69]

mike never fails to diss tan interior every video 🤣🤣

[@PrizzaMike]

😅💀

[@FunCares]

25:00 - 25:40 I’m just gonna say something everyone else has already pointed out but . . . . Frikken… inspiration🙏🏼

[@LamontAtLarge_]

👆👆Thanks for great subscriber.💓 I have something for you 🎉 message me with the above name on telegram for your prize

[@semhouben6300]

As an automotive technology student, this channel has learned me a lot, as a matter of fact, I’m watching this video during my drive technology class. Really enjoy every video!

[@jarrodlangton987]

I absolutely love ur vids and determination the fact u never gave up on the 240 and just did it to learn and keep ur baby and using axels that ain’t made for the car and making it work, this the type of engineering I like

[@jasonpetrich4141]

Bro you need to make a sick coffee table out of all the old boards, and you need that little trailer, we had said to build for the work truck she deserves some help with the heavy loads.😀

[@OPEK.]

that old toolbox is shot lmao. those s13 fuel sending units are 700$ new thats actually such a nice find

[@beautifulbeaner]

love the content mike keep up the amazing work!

[@TruthWaves22]

I got integra but i don't have the time to work on it. Sucks. Or a place to work on it. 1996 LS B18B 254k Miles. Still runs. Just has the brake light on. There good cars honestly wish more people would love Hondas.

[@Ascends]

Such a great channel! I’ve been following for a year now, and I love every part of the videos. The dialogue, the perfect amount of pacing, it never gets boring, I love seeing the progression of all the cars you own.

[@sixeight8683]

Love videos like this giving information like this for these cars.

[@tbgaming894]

Man I love your videos. Always so entertaining and interesting to watch. Keep up the amazing work looking forward to next season drift contact

[@rodrigo4379]

Love teg videos man! Can’t wait for more :D

[@jewgs30]

love the integra videos! very helpful information, i’m also building one so learning new stuff the more u post

[@dashxts]

I actuslt needed this video just told me that exact axwl I needed

[@michaeljohnson3826]

You give me motivation keep it up bro

[@benpatrick9033]

been waiting for a new teggy vid. Great content!!

[@MrGrentch]

_Really_ late to this :) but very nice job, explanation and really clever mix and matching. I only found out about the CRV stuff when I needed a front wheel bearing replaced on my JDM DC2(98 spec). Bought the 'correct' bearing only to find it didn't fit. Turned out it was for the Euro R and the pre 98 spec JDM R, as you point out the JDM 98's on have the same size bearing as the CRV. Nice JDM front end and I see you have the HID headlights too. They're going for daft money these days and sadly there's no third party options. Always liked the USDM rear lights with the extra corner bulb. I've a couple of sets of JDM and Euro rears and might have a look at retro fitting the corner bulbs(the mount is there but sealed). And then there's the Euro rear bumper foglight that needs fitting...

[@GeorgeEI7KO]

Nice work and positive mental attitude as always mike. Well done man. Regards from Ireland!!!!

[@The_Room_Of_Arachnids]

I’m getting back into cars after all this time and your channel has really helped me out a ton! I am actually learning things and I’m starting to work on my old bike because I can’t own a car yet, but my first will have to be an integra.

[@Ronnie_S]

Thank you for the upload, really needed this video on a Tuesday night to help me get through the week. I greatly appreciate it.👍

[@alomechanthasinh4079]

Great info my dude. Thanks for sharing the knowledge.

[@shinji5]

ur so real at the end. motivating stuff 🥲

[@AaronSanchez-gv1ks]

Definitely my favorite car tuber rn

[@Patrick_Andrews917]

Great video all around 🤘 cool to learn more about how parts from some of the different Honda models can interact. I love your cars! And also, I'm glad I'm not the only one that holds onto all their old skateboard decks 😅 they're like pages in a story to me.

[@buzzlightyear2851]

ayyee I asked you to film more junkyard runs and you did, Love these 🫡

[@luvsrevenge7996]

if ya don’t know what to do with the boards, my advice is to repurpose them into stuff like shelf’s or even a chair if you hav enough!

[@theshotgunguy3721]

you've inspired me to work on cars at a young age, love your chanel!!

[@kirkbuilds6732]

As always awesome video broski keep it up

[@mk-yn9gg]

Bro deserves a new subscriber

[@LamontAtLarge_]

👆👆Thanks for great subscriber.💓 I have something for you 🎉 message me with the above name on telegram for your prize

[@PrizzaMom]

Love the way you break things down and explain them.

[@james.defields]

Loving the videos man

[@cooper8688]

love every video u post such a vibe and straight forward person

[@LamontAtLarge_]

👆👆Thanks for great subscriber💓 I have something for you 🎉 message me with the above name on telegram for your prize

[@Eventuallyillpost]

Prelude axles are 32mm inner and 36mm outer. That’s what I used in my b series Ek with crv nuckles. I believe bb6 prelude

[@LamontAtLarge_]

👆👆Thanks for great subscriber.💓 I have something for you 🎉 message me with the above name on telegram for your prize

[@WrenFJ]

Thank you for the video! You've definitely inspried me to keep looking into 5x120 converting my JDM Odyssey :))

[@bahizi2133]

Just found your channel today and I love the content. You're super creative.

[@PrizzaMike]

Thanks man! 🤘

[@mattheusbeukes6809]

Hi u inspire me alot an old unkle of mine told me everyting is made by a human why cant u fiks it and i go on that thanks for you to bring it back

[@DomBounty]

I really enjoy the junk yard videos!!

[@phonkcy2918]

19:28 i love the EHHE

[@PrizzaMike]

😅

[@kriskrisminer]

yeas i was waiting for an integra video edit: 20:18 ill remember how to start a car with an extra battery, thx for a tip, it's perfection

[@PrizzaMike]

😅

[@robertgariepy35]

Awesome to see this and hyped to know this actually works, hope you do a video for the rear aswell. Been wanting to do this to my 96 gsr but haven't seen many good videos of it being done, just read articles of it being done. Started following you on Instagram a while back because of videos of you rebuilding the 240, even more pumped seeing you posting videos of stuff for Integras as well. Keep up the amazing constant man👍

[@LamontAtLarge_]

👆👆Thanks for great subscriber.💓 I have something for you 🎉 message me with the above name on telegram for your prize

[@danielcorona2871]

Great video bro 👍

[@ruktheduck]

i love the videos mike, keep it up

[@ZweiGotter]

i just got a 97 GSR, workin baby steps but im learning as i got redoing the suspension now. hopefully i can do cool stuff like the 5 lug down the line. thanks for the video.

[@1slowmugen]

I love this channel bro you give so much detail on how to do it your self it’s amazing! Keep up the great work and congrats on the 240 comin back 🙏🏽💪🏽💪🏽🫡

[@LamontAtLarge_]

👆👆Thanks for great subscriber.💓 I have something for you 🎉 message me with the above name on telegram for your prize

[@BlackPanther375]

Best youtuber🔥

[@luckivick]

No lie they integra is my favorite car you have, Im just a Honda boy

[@sbperformance7279]

This was super informative for me sense I love my integras, I've got a 97 rs with a turbo ls vtec and a 99 gsr that I'm restoring and putting a poor mans type r swap in. Would love to see a video about the rear 5 lug in the future!!

[@vincentblouin5882]

Great video!!

[@mrchikago4420]

Dude awesome video

[@Maostodon]

This was cool! That integra is sick 👏

[@Seismic221]

love the integras videos gives me ideas on what I can do with mine, still trying to get it running tho

[@justdee2457]

Great info

[@davidbeverly3463]

That's pretty wild for the 5lug swap! I'm betting it works for 96-00 Civic Bseries 🤔 I'm running TruHart CRV upper A arms Rn and knew there is tons of interchangeable parts between the 3 models but hadn't seen this yet. Can't wait to see the rear swap info cause I may swap my 97 Coupe one day all around. As always I love how your channel is exactly same as both my loves in whips! Honda N Nissan boi! 💪💪💪

[@PrizzaMike]

Great taste haha Best of both worlds! I'd assume this will work on a b series civic (eg / ek) but I have not confirmed.

[@martinian0340]

Lov ur vids keep like this!!

[@LamontAtLarge_]

👆👆Thanks for great subscriber.💓 I have something for you 🎉 message me with the above name on telegram for your prize

[@largetarp]

how am i early every time! love the content man, much love from Australia!

[@robertsewell9214]

The red fender on the 240 is a vibe

[@ernestsantos7809]

PrizzaNation ✅

[@112poipoi]

hella informational :)

[@bloody_pinata]

You're such a good egg Mike. Great video as always

[@is.300g]

You’re amazing ❤

[@badaboom8520]

Love to see the new content from you Mike, next Friday I am back on that outro list

[@PrizzaMike]

Appreciate you homie 💪 Just be sure to care of yourself before all 🙌

[@Forest__Spirit]

Treflip next vid please 💜 also that poor coupe lmao I remember u getting hood latches off it and it was folded from the front rails rotting out 🤕🤕😔 at least that sending unit was all zinced up still and not rusty

[@shawnschmidt8788]

getting back into hondas so def looking intoo this

[@LamontAtLarge_]

👆👆Thanks for great subscriber.💓 I have something for you 🎉 message me with the above name on telegram for your prize

[@vibeandride2984]

Love this channel bro you're gonna blow up no doubt

[@LamontAtLarge_]

👆👆Thanks for great subscriber.💓 I have something for you 🎉 message me with the above name on telegram for your prize

[@vibeandride2984]

You're welcome for your 140 bucks asshole

[@Megacatares]

They have tools for ball joints, tie rods, etc. I guess hammering works too! Super helpful video! For axle nut mine was seized on my dell sol. Broke a breaker bar. Hit it with an air impact gun and it took it off whew.

[@PrizzaMike]

The tools for ball joints generally harm the ball joint itself. For example, a pickle fork is only to be used when replacing the joint because it damages the boot

[@Megacatares]

@@PrizzaMike Yes those will destroy it. I'm talking about the ones that you can rent from advanced auto. They typically don't. but hey what you are doing works so screw it. Thank you for the content!

[@Antiliv.]

Dude you are the entire reason I want a 4 door integra I'm ngl, here's hoping I can find the money for a type r 😅

[@minutemanatee930]

I'm suuuupppper excited for the five lug swap knowledge. I would love to five lug swap my teggy!

[@dubiousf00d]

My honda came 5 lug(prelude). Love teggys. 1st Honda I ever drove was a GSR. Pretty badass winter beater lol

[@twoeightythreez]

FWIW i usually just snip the hard brake line, its nice to have an extra flare nut if you need one

[@SpeedPhantom1]

I don't even own an Integra and I still enjoy this

[@iAlbert180]

you can try making some sort of wall deco with the boards. I'm sure you can cook something up

[@LiamRocksRoblox]

AYEEE!!! MY MANNNNN!

[@Gutts_7]

YESSIR TEGGY CONTENT 🎉

[@Gutts_7]

still love da 240 content 💜💜

[@knightmech1848]

crackless dash is a sick find.

[@RedSport555]

The only thing missing from this channel is stuff being cleaned lol