Reviving Razor E300 Electric Scooter: Part 2 - Upgrades and Restorations

Try out PCBWay: www.pcbway.com/Get $5.00 in-credit welcome bonus after joining: www.pcbway.com
This time we upgrade the Razor E300 electric scooter from part 1 where we made its battery and convert it into being a really speedy pimped-up E-scooter with so many new additional features!
Comment below your thoughts and any suggestions for future upgrades.
Additional info that I may have not mentioned in the video:
🏃‍♂️ Run time with its current battery - 40 minutes
🚅 Top speed - 25km/h
👟 Accelerates from 0 to 25km/h in 4 seconds
↔️ Range with current battery - 12km (8 miles)
----------------------------------------------------------------------
👉 Visit my online Storefront: sites.google.com/view/maximag...
----------------------------------------------------------------------
☕ Buy me a coffee: www.buymeacoffee.com/MaxImagi...
----------------------------------------------------------------------
Instagram: @max.imagination - max.imagina...
Instructables page: www.instructables.com/member/...
----------------------------------------------------------------------
Disclaimer: Amazon purchase links below are affiliate links. It doesn't cost you extra to buy through those and I just get a tiny commission. Thank you!
🪛🔧🔨 Tools and supplies I typically use:
➡️ Soldering Iron Kit - amzn.to/3X6L5Wq
➡️ Hot Glue Gun - amzn.to/3E6trJG
➡️ Drill Machine - amzn.to/3EDe0u8
➡️ Box cutter/Utility knife - amzn.to/3hP9MGI
➡️ X-Acto Hobby Knife - amzn.to/3XbL7ML
➡️ Cutting Matt (Green) - amzn.to/3gil71A
➡️ Needle-nose Pliers - amzn.to/3ECTKc3
➡️ Wire Cutters for Electronics - amzn.to/3ECut1B
➡️ Wire-stripping tool (Automatic) - amzn.to/3hQsMVD
➡️ Screwdriver kit - amzn.to/3V6vgNX
➡️ Heat-shrink Tube Kit - amzn.to/3AksTPE
➡️ Jumper Wire Kit - amzn.to/3UGhMZq
➡️ Breadboard for Prototyping - amzn.to/3GlF4ze
➡️ Perf Boards, Pin headers, and Connectors Kit - amzn.to/3AkySUw
➡️ Superglue - amzn.to/3EE6uis
➡️ Duct Tape - amzn.to/3g5mTU0
➡️ Double-sided Tape - amzn.to/3Edta82
➡️ Kapton Tape (for battery leads) - amzn.to/3X58bNl
If you enjoyed watching this video, you may also prefer to watch:
DIY Powerful 24V 11Ah Li-Ion Battery Pack | E-scooter Upgrade Part 1
• Build a DIY 24V E-scoo...
DIY WiFi Security Camera ESP32-CAM Rechargeable | Step by step Tutorial
• Make a Simple WiFi Sec...
Pimp My Bicycle PART l - Making and Installing LED LIGHTS | DIY LED Bicycle
• DIY LED Bicycle - Inst...
-----------------------------------------------------------------------
Video chapters:
00:00 Introduction
01:15 Restoration
02:19 Try out PCBWay
02:54 Regripping deck
04:08 Headlight, Horn, and Taillight
07:28 Mounting 3 finished parts
08:36 Making Brake lights
10:06 Main wiring of circuit elements
11:42 Making Arduino RGB lights controller
14:30 Making control panel
17:07 Adding on a Bike computer
19:01 Additional Add-ons
20:15 Montage & Testing
22:29 Outro
-----------------------------------------------------------------------
🎵 Music credits:
Song: DayFox - Candy FriendsMusic provided by Vlog No Copyright Music.Video Link: • DayFox - Candy Friends...
Prod.M4H - Ti3Au (No Copyright) • M4H - Ti3Au [No Copyri... Track: Sport Trailer Rock [Rock Music] by MokkaMusic / Run Faster • (No Copyright Music) S... Music provided by "MokkaMusic" channel and inaudio.orgTrack: Modern Technology [Background Trance Music] by MokkaMusic / Robot • (No Copyright Music) M... Music provided by "MokkaMusic" channel and inaudio.orgSong: MBB - Feel Good (Vlog No Copyright Music)Music provided by Vlog No Copyright Music.Video Link: • MBB - Feel Good (Vlog ... Song: MBB - Beach (Vlog No Copyright Music)Music provided by Vlog No Copyright Music.Video Link: • MBB - Beach (Vlog No C...
#electricscooter #restoration #razore300

[@GrandadsOtherChannel]

Brilliant work, Max. You really went to town on the upgrades 👍

[@MaxImagination]

I appreciate your comment, James! As certain stages it really felt like a drag, but I got on with it, it payed off in the end having done what I did :)

[@CraftChannelYT]

Hi Max 🙋‍♂️ nice video bro

[@MaxImagination]

Hey, thanks!

[@BuildCreation]

Its size is perfect and powerful too!

[@MaxImagination]

Hey! Thanks for watching 😁

[@Technocrafts]

Wow!! Awesome video Max 😍

[@MaxImagination]

Thanks, bro! 😃

[@CreativityChannel45]

Well Done 👍🏻

[@MaxImagination]

Thank you :)

[@kspcreation666]

The video was surely amazing we need more restoration videos like this the video was 🔥🔥 loved it!😄🔥🔥

[@MaxImagination]

More to come! Thanks a lot! :)

[@ManusWorkbench]

Next level restoration..cool ... 🔥🔥🔥Keep up the work 👍👍👍

[@MaxImagination]

Thank you for watching! 😀

[@StateofMichigan-26thState]

Great editing, great vid!

[@MaxImagination]

Glad you enjoyed it. Thanks! :)

[@creative_thinker]

Finally what i was waiting for

[@Parth_188]

That's great! Very innovative💯

[@MaxImagination]

Thanks, Prathmesh! Waiting for your new video 😁

[@7MinutesCreative]

Your video is amazing Max ❤❤👍👍

[@MaxImagination]

Thanks so much, my friend! :)

[@7MinutesCreative]

@@MaxImagination You're welcome ❤

[@rajpatil3758]

🔥Awesome video Max 🔥Next level restoration 🔥❣️...

[@MaxImagination]

Thanks for viewing, Raj! I appreciate it :) Waiting for you next vid!

[@rajpatil3758]

@@MaxImagination i will try to make it soon..❣️

[@11bayrat]

Nice Job ! You are over the top!

[@MaxImagination]

Thanks for watching! 😀

[@SC.243k]

Wow amazing beautiful idea 👌✌️ thanks my friend 👍👍👍👍👍👍💙

[@MaxImagination]

Thanks to you for your comment! 🙂✌🏻

[@CraftChannelYT]

Woow super max 👏

[@MaxImagination]

Thanks, Naras! :)

[@Mr.GeniusCreation]

This seems pretty cool 🔥 Awesome video Max 👍

[@MaxImagination]

Thanks a lot for your consistent kind support, brother! 😁✌🏻

[@slyasastech]

Nice work my friend

[@MaxImagination]

Thanks, Yasas!

[@jkermashup7376]

Wow bro i saw your channel first time and it is really awesome

[@MaxImagination]

Thanks and welcome! :D

[@JB-js4xi]

I love it! I have a regular newer e300 and I'm crazy about it....yours is awesome

[@MaxImagination]

Hi! Thank you for your kind comment. Anyone who owns one of these E300s sure knows how thrilling a big toy as such is to ride. Thanks for watching! Cheers, Max

[@tobilos_gaming]

Amazing work max. keep doing this!

[@MaxImagination]

I appreciate your kindness! 😁✌🏻

[@bankebihari_collection]

Nice project

[@MaxImagination]

Thanks :)

[@envisionelectronics]

The 4017 decade counter can be wired to reset after 9 counts since you have only 5 LEDs. As it is now, there are 2 “counts” on the first LED and 1 on the others so there is a visual dwell a little longer on that LED.

[@MaxImagination]

Thanks for your tip. When I work with the CD4017 again, I'll consider that. Cheers.

[@michaelthomas366]

Your skills are impressive !

[@MaxImagination]

Thank you very much!

[@sidsolocreation]

It's very cool, looking 🔥🔥

[@MaxImagination]

Thanks for checking it out! 😁✌🏻

[@DaveyRaaijmakers]

Very Nice Max

[@MaxImagination]

Thanks, Davey :)

[@jonujangid3J]

Awesome upgrading on e scooter, if possible try to make ebike

[@MaxImagination]

Thanks, Jonu! Will consider that idea for a future video :)

[@christothegreat1]

Upgrade: hub motor and Regen controller with Bluetooth battery stats, bms with bad cell location for individual cell replacement.

[@GregOnSummit]

Use PCBWAY and make some PC boards , instead of the perf board you used. I'd buy a few ... heck, might make my own 😉 Looks great ...

[@MaxImagination]

Will consider pulling aside my sponsors for future projects of mine that need PCBs! Thanks for watching. Cheers!

[@kellytaylor3134]

Bigger battery and motor time

[@arduino1019]

cool

[@davidsiwale8503]

You Really are awesome man. I would like to get in touch if you don't mind.

[@anyonecanmakeit718]

How many leds can we join in rider effects

[@MaxImagination]

For the Night Rider effect, I believe it's 6 LEDs per decade counter chip. So it's possible to add as many as you'd like, though the circuit will get complex.

[@abrahamhudson198]

Is that still the stock motor and speed controller? Thanks

[@MaxImagination]

Yes, that is the stock 250W motor.

[@AcidiFy574]

Any intention of making IoT devices/Home Automation videos with Arduinos??? maybe with an open source AI assistant (Mycroft perhaps)

[@MaxImagination]

Thanks for your video topic recommendation, I will keep it in mind. :)

[@AcidiFy574]

@@MaxImagination Actually the Assistant is probably done by using a Raspberry-Pi (AKA PiCroft) But still should be interesting & Maybe we could see projects on: > Wifi extenders/ Repeaters > Mesh network

[@ravishivade8348]

Which software do u use for editing videos and thumbnail

[@MaxImagination]

Hi, I use Adobe programs, Premiere Pro for video editing, Photoshop for thumbnail making.

[@ravishivade8348]

Thanks for replying and good editing

[@MaxImagination]

@@ravishivade8348 Thank you! Good luck with your editing learning process, may you make some outstanding videos with what you'll learn, too. 🙂✌🏻

[@glennbreukelman8241]

hey what range do you get with it

[@MaxImagination]

Hi! I get a range of about 12-16 km

[@moheeharshil9410]

What the usb port do

[@MaxImagination]

Charge mobile devices.

[@davieanwilliams1312]

Yoaw 🆒😎 e swagger

[@kspcreation666]

I am first i guess 🤔😁

[@joshuaaranguren1020]

Great restoration saves you lots of money rather than those expensive scooters. 🛴

[@MaxImagination]

Very true! Thanks for your comment! :)

[@joshuaaranguren1020]

@@MaxImagination no problem 😊