RFID- Program Allen-Bradley PLCs Using Ethernet/IP

[@andrejacob6281]

I'm brazilian, I just did see this movie 5 years after the post, but did help me a lot. Thank you.

[@PepperlFuchsUSA]

We are glad it helped! We have more great videos on our KZbin Channel. If you haven't, please subscribe.

[@lmlogix]

(PT) Tecnologia utilizada pela LMLogix Automação na indústria automotiva Brasileira em Catalão-GO. A documentação completa da Pepperl+Fuchs facilitou o projeto desenvolvido em Eplan. (EN) Technology used by LMLogix Automation in the Brazilian automotive industry in Catalão-GO. Full documentation of Pepperl + Fuchs facilitated the project developed in EPLAN.

[@zayas002]

Hello, to do that test it is necessary to have the device in physical? We have to install one, but they are going to give them to us the day of the installation, before that, we must know how it is programmed, I take the liberty of doing it but it does not write the value in the reading.

[@GogeeReptileCuddles]

This is a great video, very informative.

[@laynerudisille365]

I am having a hard time finding those add on instructions (.L5X) files anywhere. Would you be able to post another download link?

[@PepperlFuchsUSA]

Hello Layne, thank you for reaching out. You can find the add-on instructions under product. www.pepperl-fuchs.com/usa/en/classid_2474.htm?view=productdetails&prodid=40511 Once there, please tab over to the software tab there, you can download the information needed.

[@ravasahebkoganule2768]

i want to communicate siemens s7-300 and P&F rfid how to do it using simatic manager please give example

[@PepperlFuchsUSA]

Hello Ravasaheb, the function blocks are device specific. This means there is a function block for the 1-channel device, another one for the 2-channel device and a third one for the 4-channel device. The function blocks are valid for PROFINET and PROFIBUS communication. On our website, there are special function blocks available. With these versions you can read and write some of our tags completely with one trigger. Additional function blocks may exist; please contact our technical support www.pepperl-fuchs.com/usa/en/ask_an_expert_fa.htm and provide us which evaluation units, head, and tag you’re using. Thank you.

[@bigbadoscer]

I cannot find the add on instruction anywhere. I've checked my product and similar product off the website and the only instructions to download are for omron and profinet stuff, and of course the EDS file but I cannot find these add on instructions you are using

[@joaoscreed]

Follow the link to import the add-on instruction www.pepperl-fuchs.com/usa/en/classid_2474.htm?view=productdetails&prodid=40511#software

[@log0309]

Do you have the link for the EDS file?

[@FbrDiego]

how to configure whit Omron NX102? Do you now?

[@PepperlFuchsUSA]

Hello @FbrDiego, we're here to help. Our customer service agents and technical support specialists are ready to answer your questions and help you get the information you need. Please fill out our Ask an Expert form by clicking this link here: www.pepperl-fuchs.com/usa/en/ask_an_expert_fa.htm

[@cascadeanalog320]

Awesome ! Thank you Sir !

[@PepperlFuchsUSA]

Thank you!