RG 1/144 UNICORN GUNDAM PERFECTIBILITY (THE GUNDAM BASE LIMITED) Speed build Review

[@GyuHobbyRC]

Nice vehicle, nice video Awesome Let's get along with friends with the same hobbies.~ 잘 지내봐요.~~ 😀😀😀

[@SwingCritic141]

God this was satisfying to watch. Nobody on KZbin builds them after panel lining and decals.. that was sweet to see. Did you do much color painting on this? The blue for the feet, backpack, and the wing like parts over his shoulder look so good I just wanna be sure, thanks man.

[@Armstudiogunplaspeedbuild]

Thank you man, I only repainted metallic blue on the wing and v-fin. For other parts, I did panel line, decals then applied flat top coat.

[@sythan_]

can you do tutorials? i absolutely love your work 1) nub mark removal 2) how to mix paint 3) How to get the Matte Effect 4)ETC

[@Armstudiogunplaspeedbuild]

Thank you for your recommendation. I hope I can do some tutorials in the future. However, I will try to reply all comments. 1) I use only art knife to clean up nup mark. I dont use sand paper because I'm not going to do full paint job on this kit. 2) I dont have any trick for mix paint. I just mix then test on white plastic spoon. Then, keep adding colour or thinner until it is ok. 3) For matte effect, I use Tamiya spray can flat top coat. Flat top coat will make nup mark less visible and also make the kit looks smooth like full painted kit.

[@sythan_]

@@Armstudiogunplaspeedbuild Ahhh alright ² i get it now , so only simple knife clean up alright, how to get that matte finish effect? what paint to use?

[@Armstudiogunplaspeedbuild]

@@sythan_ I use tamiya TS-80. It is lacquer base spray can. It is basically matte clear paint. You can assemble the kit then spray it on the kit by section like legs, arms, waist, head, etc. Applying top coat is the last process. So, I normally do assemble>panel lining>apply decal>spray top coat.

[@ilikegiantrobots1775]

I have a massive question: how did you get your panel lines so crisp? I use a standard fine tip Gundam Marker, so I’m just curious as to how you did this. Thank you in advance

[@Armstudiogunplaspeedbuild]

better use tamiya panel line accent. It is thin enamel color ready to use. Just a drop on panel line and let it run. Then clean the excess with enamel thinner.

[@SovReviews]

@@Armstudiogunplaspeedbuild is this a Dark Grey or black panel liner?

[@Armstudiogunplaspeedbuild]

@@SovReviews I used black.

[@Ramen551]

It did not crack the plastic

[@handsomecapybara]

How do you top coat this? I mean... You remove the clear part or top coat before assembly or just cover with masking tape?

[@Armstudiogunplaspeedbuild]

Topcoat before assembly

[@handsomecapybara]

@@Armstudiogunplaspeedbuild owhhhh thank you

[@tensazangetsu8076]

is the arm frame still stiff like the other rg unicorns? (unicorn, banshee, full armor)

[@Armstudiogunplaspeedbuild]

Yes they are still stiff.

[@meikisaragi1445]

1:43 yes this is still the best way to transform the legs. Why? Because I snapped mine 😭

[@thanhvu2377]

You used too much force, I have built 9 variants of the rg Unicorn I have never broken that part also once I transformed It, I leave them in destroy mode forever

[@dinkoman2081]

Questions are runners come in seal bags not plastic folders like bags? I think my version is bootleg

[@Armstudiogunplaspeedbuild]

What do you buy?

[@dinkoman2081]

@@Armstudiogunplaspeedbuild I did research it's bootleg/knock off model kit

[@arturoramirez5748]

I bought the model recently, does it also have the stiffness on the arms inner frame and if so how do you lessen the stiffness?

[@Armstudiogunplaspeedbuild]

Yeah there is but I didn’t do anything

[@jackjack3928]

hi i need some help as i cannot turn the arms 90 degrees as per the instructions. i even broke one of the arms trying to do so. does any know wherre i can buy broken parts ? :)

[@Armstudiogunplaspeedbuild]

I remember it was tough but i have no problem with it. No idea man. I mostly try to fix it myself.

[@berniekhong9257]

Can you Build the RG Astraea Type F please... I love that Gundam so much.. thank you

[@Armstudiogunplaspeedbuild]

Interesting

[@JaniumCanium]

Nice

[@seamagician7042]

If I could get a phenex v fin, how would you suggest I paint the perfectability gold ? I was thinking of making this into a phenex bc the phenex isn't worth it in my opinion since I could get the mgex for the same price

[@Armstudiogunplaspeedbuild]

RG Phenex become same price as mgex?

[@seamagician7042]

@@Armstudiogunplaspeedbuild bc of resale and the fact bandai doesn't sell it themselves anymore, yes

[@Armstudiogunplaspeedbuild]

@@seamagician7042 RG Phenex is p-bandai + gold coated. When i bought it, I already felt like it's so expensive. But i didnt expect it became this high price bc sometime they also reproduce p-bandai stuff. I think better just wait. If you want to build phenex from perfectability, the problem is v fin. Perfectability also have banshee v fin in the box. Maybe you can modify from that? or take it from hg phenex.

[@seamagician7042]

@@Armstudiogunplaspeedbuild well my m8 is buying from Samuel decal. The stuff he's buying comes with a white phenex transforming v fin that he doesn't want. They are doing a reproduction but it's already sold out as preorders I believe

[@Armstudiogunplaspeedbuild]

@@seamagician7042 That's nice then paint it man.

[@EKOddLink]

Where did you get that nice shiny metallic blue paint

[@Armstudiogunplaspeedbuild]

I used Tamiya TS-19 metallic blue.

[@EKOddLink]

@@Armstudiogunplaspeedbuild thanks! I'm actually planning on building one of these soon and really didn't wanna have to resort to those VFin stickers

[@peterbui8033]

Does this unicorn version using the same clear abs runners like other unicorns, and also does this kit really worth buying for the extra parts with it?

[@Armstudiogunplaspeedbuild]

They are same. I think this kit is ok. The price isn’t crazy as rg phenex.

[@peterbui8033]

@@Armstudiogunplaspeedbuild thank you for the reply, hope to see more your videos in the near future 🥰

[@ChrisTian-sd5yq]

yes it's worth to get as it contains all the special equipment of other unicorn

[@dotzrts1945]

I got the HG version of this. Not as overall pretty but I love the design regardless, also Rail Gun arm > Laser Axe

[@Armstudiogunplaspeedbuild]

I think they look pretty similar from a distance just HG looks a bit cleaner.

[@RandomPerson-cm2wg]

I humbly disagree with your opinion.

[@dotzrts1945]

@@RandomPerson-cm2wg Thank you for being humble about it though. Haha

[@lockonstrauss7714]

do you top coat first or do panel line first. thanks

[@Armstudiogunplaspeedbuild]

Panel line first

[@thegenōsian]

Is the blue inner frame the same as the RG phenex

[@Armstudiogunplaspeedbuild]

Yes, it is.

[@ChrisTian-sd5yq]

thinking between this and silver freedom 2.0, will get this probably over freedom

[@OnlyRuby]

Wow

[@dkphantomdk]

was this a speed build, Iam pretty sure that I noticed the lenght of your nails grew now and then :D :D - I just ordered one of these kits today, and I cant wait to get started.. I enjoyed my HI NU ver ka... so this rg unicorn perf. will be my second build ever ! :)

[@Armstudiogunplaspeedbuild]

Yeah It was 2 weeks built in 8 minutes video.

[@haramberoth117]

Made mine in red. I didn't like the blue on the unicorn because i have a phenex and and banshee so i wanted them to pop individually so i orderd the vn and bs and the DEs with stabilizers in white and red and kept the claws yellow like the V fin as well as the XC. And the outcome looks so good. I think ill get a full armor unicorn and buy the extensions in white and green and make a awakened perfectibility

[@Armstudiogunplaspeedbuild]

wow, that sounds really awesome bro

[@ChrisTian-sd5yq]

Yeah Divine

[@bartflorentino7918]

What kind of paint did you use for the v fin?

[@Armstudiogunplaspeedbuild]

I used Tamiya TS-19 metallic blue. It is lacquer paint.

[@fused481]

Where u get this

[@Armstudiogunplaspeedbuild]

I bought it from an online store.

[@rochardiego3442]

Yeah its big brain times

[@zojirushi1]

Too top heavy.

[@zziggy9047]

how much

[@Armstudiogunplaspeedbuild]

$115

[@pguru5292]

Why is it so expensive

[@Armstudiogunplaspeedbuild]

It is not that expensive bro.

[@pguru5292]

@@Armstudiogunplaspeedbuild its 150€ where i live(181 $)

[@Armstudiogunplaspeedbuild]

@@pguru5292 aw that is too expensive. It should be around 120-130$.

[@SoapBrick]

This isnt a review at all

[@JaniumCanium]

Nice

[@Armstudiogunplaspeedbuild]

Thank you