RG Akatsuki Problems, God Gundam Figures, Freedom Beats Cat Memes, And More [Gundam News]

[@kakarot197]

Check out Vivion Blue and support the channel: vivionblue.com/7665415

[@worldwanderer91]

KZbin is shadowbanning you. I am a long time subscriber to your channel and yet this video didn't show up in my feed nor in my subscription list. I had to go search for it.

[@pauljordan0203]

if you ask me, the RG Akatsuki model kit was rushed, they should've updated or made a 2.0 Strike Gundam, like they did with the RX-78-2, BEFORE releasing the latest RG kit.

[@topdragon8164]

The RG Akatsuki is so anime accurate that it reflected my interest in it right back to the old 1/100

[@MathSouza1999]

Remember that right after showing up, it lost an arm in front of everyone 😂

[@ZeroXSEED]

1/100 NG is underrated

[@teknonaught]

Isn't there a third party / KO of the 1/100 Akatsuki with the Hyaku Shiki like Gold?

[@duelgundam]

​@@ZeroXSEED"too expensive to be an MG, but we'll make it compatible anyways."

[@Mobius_118]

NGL, the Z'Gok is likely winning due to how many callbacks it has to the Z'Gok's first appearance in the OG Gundam, complete with the SEED rendition of the Gallant Char theme.

[@valentetellezperez6538]

That's straight up malicious on Bandai's part, it's the Gundam Tristan situation all over again with the RG Akatsuki

[@johannjorsh3334]

It also reminds me a lot of the RG Sinanju situation as well

[@jammo7370]

yeah it's so odd that they went with the strike's inner frame when the freedom 1.5 frame would have worked with the design as well and is leaps and bounds better than the strike's

[@darkhorse744]

What? The waist and possibly the head having problems is not equivalent to the entirety of the Tristan. That's overdramatic.

[@valentetellezperez6538]

The real problem with the Akatsuki are the hips which are balljointed because of the old Strike frame, and maybe the shoulders because it also keeps those balljoints. Very early RGs used balljoints everywhere for some reason. Later RGs that still kept the pre-molded frame abandoned balljoints for the hips and shoulders, limiting them to the ankles, waist and hands.

[@kekoa_ok]

Overdramatic af

[@Psudostooge]

8:25 the new Gundam series stole the U

[@DorkSideStudio]

Those Ichiban look really cool. They used the exact same style for the Digimon ones where they looks sculpted roughly.

[@김세원-m6x]

my favorite news channel

[@mckmitte]

Seems to be a bit of a mistake on the Char datestamp, in one of the options there’s actually a picture of Quattro Bajina, actually a common mistake as his piloting skills are said to resemble those of the red comet

[@matohibiki]

Can you really blame him? Everyone makes that mistake at some point. Quattro has sunglasses, that's how I tell them apart, while Char has a visor that- Hmm...

[@SkullArrol]

12:34 I'm sure Quatre's used to it by now, kakarot197

[@gundamboy96]

I was already planning on making my own RG Phenex, guess that I’ll need to do the same for the Akatsuki.

[@kamenriderovant9676]

You get RG Phenex for cheaper than making it yourself at the Gundam Base and P-Bandai reissues.

[@gundamboy96]

@@kamenriderovant9676 Yeah probably. But I really don’t want to deal with the fingerprints. I’m planning on buying a perfectibility and painting that.

[@エスティアハル]

2 fandoms divided: 1 want to ride and pilot the gundam 2 want to ride the pilot of the gundam

[@ShinHakumen]

Some wanna watch the pilots ride each other...

[@vast9467]

there is a secret 3rd one 3 want to ride the gundam

[@TheOmegaFighter]

4th is all of the above

[@lowresSandwich]

Option 5: Become the Gundam.

[@Rayan-yw2xd]

The Turn X GBWC winner was a freaking monstrosity. It's so freaking good

[@joelgoh2044]

I have a feeling that they tried to follow the lore on the akatsuki frame being base on the strike

[@Lambda3141]

I want all of those MS Ensemble figures!

[@briankim1098]

I saw the GBWC entries at Gundam Base last week. There was an entry using the 1.0 Zaku MG that I hoped would win the +20 category, but that Turn X was pretty impressive.

[@theblackunicorn261]

I've made it my goal to collect every RG ever produced, so I guess that 3P joint set's going on the list too

[@henshinplex]

i'll wait for daban to fix the issues

[@fufunumnum]

for that price Bandai should include a joint strengthening pen in the box

[@prawotokartosoedarmo6313]

For the 6 u's in GQX..the first thing came to my mind is UC timeline..like Usix..so U6..UC..okay I will seek myself out😅

[@rhen4short]

8:38 Some modeller from the Philippines will take notes from these winners and will do the same thing for his entry GBWC in 2-3 years time.

[@stormgalaxypegasus]

Bandai really goes hard after the scalpers with RG Akatsuki huh 😂

[@Ultima_Atulos_Maxim]

The GB4 update also "fixed" Hololess Mastered Skills, which was technically a bug but consisted of a small list of Mastered Skills that didn't ruin your gunpla's appearance by replacing your parts with holograms of the parts the skills originated from. After the update, almost all Mastered Skills do this now, with the except of six. Two of them utilize a weapon hologram that it loads in without replacing the part that you have equipped, one of them is literally a self-destruct, another one makes you invisible, and the only 2 besides those are a taser wire and a speed-up skill.

[@corvus9359]

I like how GQux has so many U's in the name that it doesn't even fit on the poster normally.

[@xnflg3074]

it's on purpose. the u's in "qux" in programming are iterative (first iteration has one u, second has two u's, etc.)

[@robertdrexel2043]

Honestly, the only real reason why the Mighty Strike Freedom appearance was my favorite was that I was kind of disappointed on how much it was getting its butt kicked when it had been the overall top tier mobile suit at the end of Destiny. So it retaking that spot and the overall background music made it my favorite part of the entire movie with the opening battle scenes being second place.

[@nill9120]

Any news about the Seed Astray??

[@vustvaleo8068]

I guess Bandai didn't learn their lesson with the RG Akatsuki as they did a similar thing before with the RG Sinanju reusing the RG Gundam Mk-II's inner-frame.

[@GrandSleuth]

My theory on the six Us is that it’s meant to symbolize the 2+1 v 2+1 battle

[@TheLukemcdaniel]

Would using pledge future shine on the joints help?

[@bacd-nn2lg]

I'm not sure if this is true but Gundam Seed Freedom movie might have won the prestige Anime Grand Prix rewards for the best anime of 2024. It claimed the top spot in their annual Internet buzzword rankings in 2024. It was also the highest-grossing movie in the Gundam franchise’s 45-year history. Ps. This is why I love Gundam franchise.

[@paakdisayaniyom]

Bandai then : Gunpla is freedom Bandai now : Insulting customer as scalpers and selling product at ridiculous price

[@kamenriderovant9676]

Scalpers lost this time. 😂

[@Leonx3]

I spy that awesome MK. II

[@geminas5044]

I really don't get the hate on the RG Akatsuki if I'm being honest here... i saw another vid showing how the modeler mod the RG Akatsuki's hips and from what i saw there the real issue that is causing all these drama is the ball joint... if anything it's an easy simple fix by jamming a piece of paper or a dab of super glue should be enough to fix it's stability issues and i just really don't understand all these unwarranted hate on it

[@RACH90810]

Foundation party was referencing from ZZ gundam.

[@NeoSlashott]

2:46 maybe it's like an O Gundam then OO Gundam resemblances when upgrades?

[@user-ir1xo9jp8w]

Imma be real, the problem with the Akatsuki is annoying but easily fixable. It's nothing that tissue paper or elmer's glue will fix.

[@douggoins2960]

If they had just put in the little bit of extra is the new RG. Maybe it will get a redesign. Maybe it was their plan all along

[@willnack5315]

13:15 this isn’t what I had in mind when I said I wanted more Gundam OO stuff….guess I’ll have to make due with getting the Recirculation Color version of the MG Exia!

[@xnflg3074]

i still think the six u's in GQuuuuuuX means something about it being the sixth iteration of something, considering what they mean in the programming context

[@eldricksoberano2302]

Man, did they not even test its structure before releasing it? I was looking forward to it but now I'm having second thoughts.😢

[@tfnut]

For the price you’re paying for the RG Akatsuki, using that inner frame is unacceptable. I understand model kits are meant to have extra work put into them like painting/detailing and fixing joints, but a kit should never have joints THIS BAD right after building it.

[@hijous]

people need to not blindly buying it and criticize more bandai practices.

[@StevenSkylock]

I saw the RG Akatsuki is gonna have a joint problem due to using the old RG innerframe from a mile away. Sad cause I've been very interested of getting it until I heard it uses those said innerframe.

[@rahuldasgupta1491]

So after all these years Bandai still comes up with a Gunpla (RG Akatsuki) which falters so badly after assembly and they want to increase prices for products which do not meet basic criteria of a model kit!!! What next, keep it in a sleeping position or clip it to aboard to avoid it from falling down.

[@MathSouza1999]

Still not guaranteed that it will stop falling lol

[@succmama1039]

No wonder 3rd party companies are now catching up to their shit. Bandai can innovate so good but then they will just fumble so fucking hard.

[@MaidenlessScrub]

Falter so badly after assembly? What?????? The only somewhat weak joints are the hips (which are easy to fix), the shoulders and ankles have been upgraded to be strong like the non-prebuilt frames.

[@darkhorse744]

@@rahuldasgupta1491 So many people are acting like 1 bad kit instantly means everything else is also bad. But whiners are always gonna whine. Just looking for reasons to complain.

[@rahuldasgupta1491]

@darkhorse744 This should not happen. Yes there are ways to fix the model kits but then you are paying full price for an original Bandai kit and last thing you expect is they did not fix an existing frame problem. I don't have to whine. Been into this hobby for more than 15 years and bought a bunch load a few weeks back. My question is why can't Bandai fix the problem. Don't they have a QC department to check what can go wrong at a basic level post assembly. It's a straight forward question which requires a straight answer.

[@dk6419]

I keep hoping they will make the ez-8 and custom gouf for the ensemble line.

[@Swordsman656]

Man I can’t lie the opening is way too good with the song.

[@zemmo429]

Where did you get that federation coat?

[@shashummga3477]

"Also, they know where I live-"

[@zemmo429]

Kakarot the goat

[@rider4440]

Mam I was very much hoping for a new GM kit. RG GM would be cool right? Probably wont happen though.

[@MetalFalcon99]

From what I've read is GQuuuuuux is taking place a little after the OYW if Zeon won... Man in the high castle ahhh gundam. But on a more serious note what the hell were the Zeon engineers smoking when something like that came off the production line

[@reijigamer]

I get your reference but it's more of a modification/continuation of a Gihren's Greed scenario.

[@DX2ification]

Early Real Grade Syndrome is real

[@mohamadsufihaziq1692]

Bandai could've delayed RG Akatsuki production until they make RG Strike 2.0 or something.

[@mlo009]

Should release the Akatsuki under MG, people will want it even though it would cost A LOT. Even the RG was so damn expensive.

[@reijigamer]

they'll probably do that as P-Bandai

[@tensazero]

Finally something from the Wing line, but it ends up being meh.

[@ying3966]

Very unfortunate because they made the hype over and over. People went crazy for sazabi, nu, hi nu, god, rx 78-2 2.0...and then it all ends. I still bought mine and is shipping. I also bought the pbandai exclusive unit to attach everything altogether. I was excited. I'm a SEED enjoyer. I'm ded again Bandai. Oh well, I know how to fix those joints and is extremely easy. Did people forget a model kit, is a kit? People custom things including at GBWC.

[@Frostyviewer]

He he he do the splits

[@megone01]

i smell MG akatsuki

[@ohmabones2492]

Ooooh waiter more Beyond the time covers pleaseeee

[@TheDarkestPhoenix]

Not really a fan of the battle damage, it kind of looks like foam that got stuck in a vacuum sealing bag. Also, I don't blame you for being afraid of the Bandai ninjas.

[@chaosco6535]

RG Akatsuki got bad rep because RG Strike inner frame? Why am I not surprised? But if it means more stock because not a lot of people are not buying, better chance to get the kit then

[@jesseerven4859]

its the ending to the seires it need ot be over kill

[@knightsljx]

I make it a point not to buy kits that reuses super old runners. The RG Strike is 13 years old at this point. It may have been forgiveable if Bandai included a flight stand in the box as standard

[@reijigamer]

Real Question, if you say that they should've included a flight stand (Action Base) then why not get an Action Base separately. Buying the kit and Action Base separately would've cost the same as if they were packaged together.

[@somecomposingfudsa]

they will release 30 SEED RGs before we get an RG Aerial, and probably like 60 more before we get an RG GQuuuuuux

[@EbullientSMP]

Bandai really saw the reactions to the RG Sinanku and learned literally nothing I'll give them credit for their innovation where its due, but some decisions this company makes truly never fail to baffle me

[@MaidenlessScrub]

No, they learnt the lesson from the Freedom GCP. This is not a Sinanju situation because the frame has been updated and the two gundams have similar proportions and weight distribution instead of reusing the exact same frame for a mech that can't be more different than the original.

[@hilmi8636]

Rg Sinanju all over again

[@TheLukemcdaniel]

That store sucks absolute ass. Not only is there NO WAY at all to filter out the sold out items, it looks like 90% of their inventory is sold out. It's twenty fucking twenty four. There's absolutely ZERO excuse to not have a filter on a store to weed out the sold out and pre-order items.

[@foreverfornever1124]

Disappointing in the RG Akatsuki. Bandai should be ashamed if they even care haha. Make a public statement, issue refunds and reissue the kit in the future. Theres just no excuse for it and they werent slick by adding the base either. I wasnt sure if I wanted to spend the money on such a blinged out kit but now Im definitely not buying it. I dont care if a chinese company is making a fix for it, I refuse to spend more than I need to on something that may not even solve the issue. Bandai finally failed the RG line agian. I didnt expect it to be this bad, but knew it was doomed when they announced the old strike frame for the legs. They should have canned the cost of the gold plating for a fully brand new frame

[@sandforthesoul5686]

I just watched Neon Genesis Evangelion as prep for G Quacks. It was great. I have high hopes for G Quacks. Also the Akatsuki is just diapointing.

[@Zaku186]

Its really surprising how bandai keeps making such bad decisions and there is no one with enough power to stop it from happening.

[@KaiGear]

Well, I'm definitely not buying the RG Akatsuki now. It's even worse than I feared. Now I question if I should cancel my pre-order for the Shiranui pack or hope that we get a 2.0 of the Akatsuki in the future.

[@kamenriderovant9676]

The RG Atkatsuki is already delayed to certain zones. Does that give Bandai time to apply fixes? 🤔

[@teemukoskinen2647]

First after Kakarot.

[@ryanwalters1682]

At this point, just make a replacement inner frame for Akatsuki P Bandai...

[@D.Snom.]

And this is why being exactly like the source material can go bad

[@Kepora1]

I think this is a clear sign that we have enough SEED shit.

[@nitev4407]

And the RG Akatsuki is a prime example of why I don't 100% trust Bandai sometimes... Heck, the NG 1/100 Akatsuki is better!!!

[@ej123a]

Cmon bandai! I want MG aerial calibarn or lfrith!

[@andrewthielmann5342]

A-ka-SU-ki.

[@Che1seabluesdrogba11]

Lol i still gotta force myself to watch SEED for whatever reason I've seen pretty much at least 80% of all Gundam series except that one 😬

[@Jirujan]

people call me crazy when i said that the premolded inner frame from RG Strike Gundam will be a huge problem. now who's laughing

[@Hathor1991]

Bandai should be ashamed of that blatant Akatsuki cash grab

[@elijahhaynes216]

Much like nice guys irl, the best Gundam series are forgotten for one-dimensional trash- Yes, I hate Gundam Seed. How could you tell?

[@ambientkaiga]

I would share that hate if it didnt spawn the Astrays (and maybe the Cal Re A). Otherwise yeah I never owned/bought anything from the standard Seed series. Idk, Wing/00/IBO vibed with me but not Seed. 🤷‍♂️

[@kydigadig]

What's baffling is the amount of people defending this RG. It's like they love being scammed by bandai.

[@starbound100]

People can't realize that you're allowed to love and objectively bad kit. I love the RG Sinanju, but I realize it has some pretty substantial flaws and pray everyday for a 2.0.

[@kydigadig]

​@starbound100 It's one thing to have a guilty pleasure. There's nothing wrong with that. It's another thing to be in straight-up denial about the flaws and try to dupe others into getting said bad product. And then keep telling others "consume consume, don't ask questions, just spend money. ERG kits are perfect. Just buy them. They have no flaws" The issue is that there are many in the community. With this kind of mindset. And then they try to dupe new builders into buying these bad kits. In which makes new people, to just never try gunpla again. Because of the bad experience from said bad kit. Because many of these "veteran" builders have a very sick sense of elitism. And thus think that people shouldn't be allowed in the hobby. Unless they can build the same bad kits that they did.

[@ZachBlackforest]

Only one thing to say... Gquuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuux.