Rhino 7 SubD Fleur de Lis ring

[@edenstarr5740]

I've been watching tutorials all day.... And I finally found one that makes understanding Rhino easy... Thank you, sir! 😁

[@brunomineo5302]

The double bridge command you applied between the shank and the fleur-de-lys was brilliant. So inspiring. SubD is a real step forward for jewelers as it lets the designer the funny artistic part of the work while the software is busy with the teadious calculation. Thanks for enlighting us.

[@travisserio469]

I still giggle a little every time I run the bridge command.

[@CrisPlebeu]

Thank you so much. Undoubtedly the most enlightening and objective class on the subject. Keep doing this wonderful work for the enjoyment of your readers. May God repay you enormously and give you health to continue being one of the best references in Rhino.

[@lupusk9productions]

I think you were the one who was very helpful in the gemvision forum for matrix 6/7! Always loved seeing your tips and tutorials

[@travisserio469]

Guilty as charged! Thanks for watching! Have you tried Rhino 7 yet?

[@saracavalieri4540]

I was looking for a tutorial like this for such a long time! This video is really useful to learn subd method applied to jewelry, thank you!

[@flamerz5387]

Thank you so much, you've been of great help! You're very good at explaining and you make it particularly pleasurable for who listens. Keep up the good work!

[@altar7885]

That was a good cooking show. Seriously though, this is fantastic, thank you so much

[@wunwinglow]

Excellent, shows of Sub-D in a real world application. Thanks!

[@stringfellowhawk4843]

Subscribed! We miss all your cool tuts Travis!!

[@evangelina84]

Best SubD tutorial I have seen. Thank you!

[@СергейШевченко-п7щ]

Большое спасибо, прекрасно продемонстрирована работа с сабдивами

[@bollana]

THANK YOU FOR VIDEOS AND SHARING THE WORLD YOUR KNOWLEDGE!

[@oldschoolkrist]

Great tutorial! Thank you. This workflow is so foreign to me but this really helped . Now I gotta upgrade

[@nickhazel4472]

I still use Matrix 6.3 even though I have Matrix 9. I miss the good old days and the forum

[@Leviores]

This tutorial save my sanity. Thanks you a lot.

[@mejwol8049]

Great to have all the different functions explained

[@murilong5984]

Rhino is a very smart programm. Impressive. Well done!

[@andym4181]

Magic! Looks like very easy) Thank you!

[@shubhomoypal]

Beautiful ring and guide 👍👍👍

[@zephirawt4997]

Bridge command is really amazing

[@peterschlosser7605]

The Rhino I've been waiting for. Will upgrade from v.5.

[@Kk-jj3xi]

Same! It builds so easily and quick with the new features compared to the ver.5 omg

[@ben3000]

Excellent work!

[@BernardoCastan]

Thank you for this tutorial! , I have a question please, how do yo do for select a face, an edge or a vertex ??

[@RhinoGuide]

Ctrl+Shift + left click or use Cmd+Shift on Mac. Check out the basics video on www.rhino3d.com/tutorials/#subd too

[@BernardoCastan]

@@RhinoGuide Thanks!

[@gady333]

Thanks, very good explanation and guide

[@marcoacciaresi149]

Fantastico complimenti !!!

[@larrymoremckenzie3029]

I did learn something,i learned that i have a long way to go,lol.

[@jayneweber5510]

Very cool! Thanks Travis!

[@bobbyoptoma107]

Thank you! This was a great tutorial!

[@AlexGM3d]

Thanks, hopefully more features and convenience in polygons coming soon. And we will become more happy)))

[@yesimilkucar8094]

I learned lots of things from you, thank you so much 😊

[@hakanatak1730]

Awesome video thanks

[@thequixotryworkshop2424]

Wow! Thanks for this tutorial!

[@josejoalheiro]

nice tutorial!

[@MaticLesjak]

Flair to the Fleur hahahahaha love ya man! Great tutorial by the way

[@abirsarkar7075]

Please make a tutorial on woven ring and lotus rings with 4 stones using this method. Thank you

[@redrum1270]

Thank You. Nice guide!

[@cameraforchristmas]

Amazing Video.

[@omidanmr3]

Nice job Rhino + SOLIDWORKS technic

[@rostislavpolednik2027]

Perfect tutorial!!!

[@larrymoremckenzie3029]

I Have a squarish design will sub-d work with this type design?

[@rajathpawaskar]

More jewelry related Rhino 7 tutorials

[@Dokierless]

Cool, Thanks for the video

[@kurilladesign]

nice job

[@lightips]

Good Tutorial!

[@WOODILITY]

thank you, its very usefull

[@seyyedrezahosseini2349]

Thanks a lot, it is great tutorial

[@ayeshbasrawe2585]

Thank you

[@3dmaker14]

Excellent

[@leoniddavydov2050]

Thank you!

[@orafopinofalco1561]

Number The design at the beginning is better and more defined if you adopt number X4 and number Y10, minimum

[@yaseryaser3272]

Hello, thanks so much for tutorial🙏. I have question. I have Rhino5. How can I make this model in rhino5?

[@carlofilippociambrelli6253]

You cannot. Rhino 5 doesn't have SubD. You must divide the the picture in several sections and use sweep 2 rail.

[@ibocan6347]

you are super man thanks

[@mhammedmojahid1540]

work very good

[@rhinoshoetv]

Thanks you so much❤️

[@tukangsticker2802]

Super...!!!

[@addk3]

speachless!

[@3djewels]

good job!

[@JewelerAR]

can you pull a face Uv mode ? or point or a edge ? thank you very much for the answer like T_spline handle gumball ?

[@RhinoGuide]

SubD objects don't have UV directions like a NURBS surface but you can use the Slide command to move an edge/edge loop or vertice in either direction. You can also use the Align to Object mode for the Gumball. Post to the user forum with a file if you have more questions discourse.mcneel.com/

[@travisserio469]

You can use ExtrudeSubD with command options Basis=UVN Direction=N to extrude UVN like you would with the T-Splines gumball.

[@elephantear7659]

How do I make a circle 15mm diameter.. im interested in making things numerically exact

[@carlofilippociambrelli6253]

Very easy: go to front view, click the option (circle) click ) 0 enter ands the measure making sure that you have changed diameter into radius

[@juliusjuliansyah5987]

I got a trouble in edge loop ring, i can't move the edge

[@caylandboston4310]

What is the red thing, how do I get it?

[@allenal1839]

haven't watched the video but quick question, does the crease feature in subd have strength/degree adjustability? Or is it mainly turn it on or off?

[@travisserio469]

Hi Allen, currently they are not weighted creases but I'm also hoping we'll see them in the future.

[@alizolfi9934]

verrry good bro

[@성악설-d6h]

bravo!!!

[@alializadeh8195]

thanx

[@salihbayram86]

Nice! Thank You. Thanks to you as soon as I try.

[@ohsolomonlq1426]

thank you :3

[@matteoborriero6386]

"maybe i'm just hungry" XD

[@alidesigner423]

👍👏👏😍😍

[@saadullah5583]

👍

[@munnafkhan-r7l]

good

[@Drisico]

I dont know rhino but to me it looks sooo simular to blender

[@lupesboo]

Can anybody help trying to get in the jewelry business just bought a 3d printer , and purchased Rhino 7 , no prior graphic design skills ???Help please

[@moanrome5548]

its same that clayoo xD

[@christiandavis2887]

100x more reliable than Clayoo my friend.