Rhino GPD-40 vs GPD-45: Which Is Better?

[@hippiehomesteader2377]

I'd like to see it used in that driveway over there , thats how most my land is lol. had to use a spud bar to did most my holes

[@DOOBERtv]

Will this contraption pound I'm a 1 1/4 Sandpoint 15 feet?

[@voidisyinyangvoidisyinyang885]

not in clay! I did a starter hole 22 feet down - and just tried the Rhino GPD 35 - and it mushroomed the coupler - sheared it off the 1 1/4 pipe also. So - the adapter was the largest size though - not sure - the coupler is maybe too smaller for a 2 inch adapter? Anyway good luck and let me know if you have any better luck. hahaha. I got about 8 inches down before my sacrificial section of pipe was completely sheared off - I did a blog post on it. And it was SLOW. I think when I hit a rock - it bounced back like in this vid - and I switched over to a manual 30 lb fence post driver - to get past that rock. It seemed to go faster after that but maybe it was the manual post driver that sheared off the coupler.

[@DOOBERtv]

@@voidisyinyangvoidisyinyang885 Thank you for the reply. I ended up going with an electric Jack Hammer. A local rental store had one with a special made bit used to drive the point. I literally drove 25 feet of pipe in 15 minutes. it took longer to put tape and pipe dope on the threads than to drive the pipe.

[@voidisyinyangvoidisyinyang885]

@@DOOBERtv You used a generator to plug in the jackhammer? I was looking at a rental jackhammer today. They sell jackhammer bits for post driving - online. But renting a generator seems a bit much - I'm offgrid.

[@voidisyinyangvoidisyinyang885]

@@DOOBERtv Wow the Gas Powered Driver has 1.5 newtons while a jackhammer can have 11 newtons?

[@DOOBERtv]

@@voidisyinyangvoidisyinyang885 I did use my generator, it plugged into a standard 120v outlet. The only thing is you will need a ladder and a second person to help you manuever the jack hammer unless you are an absolute beast lol. I used the ladder because with a 5' section of pipe sticking out of the ground and a 3.5 foot jackhammer it was up there a ways.

[@stevepardina7366]

Are these sch.20 posts?Will either driver mushroom home depot pipe? Thanks

[@thelionandchampion2644]

What length post would I need for a seven foot privacy fence? I am in West Texas.

[@ll2none]

Is cement still needed?

[@Alaska610ish]

Nope

[@livefree4143]

Anybody complained about the defect in that Honda motor? Or has anyone complained about your customer service? I've bought 3 of these all 3 Honda motors have the same crack in the case. And your lifetime warranty on the driver assembly is obviously crap considering I've been jacked around by your customer service trying to get replacement parts.

[@livefree4143]

And the only reason I've decided to make this public is I looked at the box I threw the drivers in this morning and got pissed off all over again. Figured I'd let everyone know about this.

[@robingoettman5893]

@@livefree4143 Looking to drive some dock pilings so love this option. In my price range but now you have scared me. Any better options out there?

[@livefree4143]

@@robingoettman5893 skidril they have the Honda 4 stroke but like I said the motor is junk. I've got 3 skidrils with the 2 stroke. Been running strong for a couple years now.

[@Alaska610ish]

Good to know not to buy their product.

[@hard2borrow428]

Good luck with your hearing!

[@goaheadmakeourdayscooterpe6724]

Seems like overkill 8ft post and 4ft in ground.What would you use with for a 8ft security fence 16ft pipes? I always thought 1/3 was recommended.

[@_theghost_1446]

Go Ahead Make Our Day Scooter &Peanut In northern climates you have to compensate for the frost line.

[@voidisyinyangvoidisyinyang885]

I built a primitive hut with post hole digger - probably went down four feet and my hut keeps getting taller! Frost heave is real. hahaha. The front door opening keeps getting smaller also.

[@billfrench9801]

longer handles no ladder

[@markstewart1278]

I need one that will drive 2 x 4

[@LCEnterprisesUSA]

Give us a call toll free at [phone] and ask for Rick, he will be able to provide you with more information and the right product to suit your needs!

[@showmerents7790]

Love mine but maybe redo the video.... you aren't supposed to have the motor facing you

[@hard2borrow428]

And for your hearing's sake- wear some ear protection - or at least communicate to the audience to wear plugs/ ear protection.

[@paulbetka2966]

That's a hollow pipe 😡 Do a real 4 inch Pressure treated wood post ❓❓

[@topsieBeezelbub]

They do not have a 4" square bit...nobody does, and the wood would crack,

[@just1lifexx11]

up close too the muffler... do you like sniffing it. old boy??