Dyson No suction?! Vacuum repair man shows how to replace a commonly failed part on a Dyson DC50

Instructions from a professional on how to replace a Dyson DC50 change over hose (COV hose).
If this was helpful and you would like to send me a tip as a thank you: venmo @Brett-Magnuson-3
This cov hose has the same gasket as the original: amzn.to/45x8lRc
This cov hose will work except you need to peel
off the flat gasket and exchange it with the flat gasket on the broken cov hose: amzn.to/3KZIZTN
Interested in investing in a quality vacuum that can last you 20 years? Contact us directly at [phone] Ask for Brett
www.richardsvacuum.com

[@Johnwenn1]

Excellent Video with good clear explanations . You have saved me loads of heartache. I thought I had to remove handle assembly etc just to replace this split hose. Many Thanks John😁😀

[@jvela1993]

Great video. Dozens of videos available that were no help. This video was easy to follow and not lengthy. Saved me a lot of money.

[@AnnCoates-yf6zk]

One of the best instruction videos I have watched. Clearly filmed and well narrated. Was able to fix my DC41 by myself after watching it several times. 👍🏻👍🏻

[@saralewis6123]

I've never written a comment on a KZbin video before but this video is a life saver! Thank you so much for this useful video and clear instructions on how to replace those parts have saved me a lot of money on a new hoover. Thank you!

[@richardsvacuumcenter]

You’re welcome!

[@joeymanzanares154]

Im not exactly a handyman but after watching this video once and then following it as I did the work I got my vacuum to once again work like it did when new. Thank you. Tip being sent.

[@rrwclc]

Thank you for posting your how to COV replacement video. I felt the spring was the most difficult step in the replacement process, more so disengaging the spring but difficult putting it back too. End result, repaired, saved a trip to a repair shop, and expense for someone else’s labor too. Part was easily found on Amazon. My Dyson sucks again . 😊 - one less household tool that could have been headed to the landfill avoided.

[@andrealovas8358]

Thank you so much for the great tutorial video! I was hesitating to buy a new one but watching your video I managed to change the pipe and now my hoover is better than a new one! Saved me loads of money 🎉 Thanks

[@kevgraham1525]

Thanks, great clear to follow instructions. Just ordered the part and glad we don’t have to buy a new vacuum cleaner.

[@rtraweek17]

where did you order part. I'm having issues finding the part

[@davidhotchkiss3798]

Perfectly pitched instructions, and a well produced video.

[@LouiseWatkins-u5p]

Exhaust Filter! ThanQ so very much, your video and instructions were easy to follow, culminating in a successful conclusion. You’re an absolute ⭐️

[@steve3c2]

it's people like you that's will save the planet from waste electronics , thanks man you saved me £'s too

[@danielnewman9176]

Excellent video! It made the replacement far easier than I expected and worked perfectly to restore my vacuum to new!

[@etch8_uk]

Took me about 30 mins to fix using your video, thank you so much!

[@richardsvacuumcenter]

Great job! Thank you!

[@paultreviska9417]

I did this myself without knowing about this video. I had a bit of a time figuring out the spring but after a while I did. I so wish I had found this and watched it first I would have saved a lot of time and removed far fewer screws, The audio is concise and succinct. Really good stuff Thank you

[@pekelo75]

Excellent video! I changed everything on my DC50 EXCEPT for the COV house, until I watched your video, which identified the exact problem with my vac. I found the part on the internet and used your video to walk me through the replacement. Just like new!! Thank you too much!

[@MrBearsfan34]

Thanks so much for this tutorial. Definitely saved me a bunch of money. Got the part from Amazon for about $35. The trickiest part was the spring, but after a bit got it back on without recking it. Thanks again.

[@jackelston6989]

Great instructions. Had a problem getting the clip off but otherwise fine. The detail on clipping the top of the hose back in was good. Many thanks. (UK).

[@GregWoodsLancs]

Maybe I'd have figured this out on my own, but this saved me a lot of time and frustration!

[@ME-ik4ys]

Very helpful video, thanks. I also took off the other hemi-spherical, that helped with access and light. It took me a while to get the washer style gasket seal completely seated but all good now. Cheers from across the Pond.

[@idegosuper5210]

Thanks I wouldn’t have been able to work this out alone!

[@christinarettig3179]

Thank you! Worked great on my DC41, after 9 years it's working like new again. Luckily we had a screwdriver set with the T8 and T10 on hand.

[@JohnClark-z5z]

We have two DC50s, one inherited, and both with the same problem. The video was excellent, and I doubt I could have worked out how to do it without it. Still a fiddly job. Thank you.

[@atmaispurpleye]

Thank you for this, just changed mine, the toughest part was getting the spring hook off and back on 👍

[@michaelhodgson3908]

Mine will not come off at all.

[@SoniaandAnna]

Thanks you so much! Sorry, I wasn't able to use Venmo, not available in my country.

[@junemiller2343]

Rocking video! So clear and wonderful ‘flow’. I would have no problem performing this repair myself. Excellent!

[@AndreaDeTogni]

Man you are great! I had exactly this same issue with this broken piece and I struggling to understand how to dismount that piece, I was dismounting too many screws and pieces. Thanks a lot!!!

[@richardsvacuumcenter]

Yw!

[@paulcannister4149]

Thanks! This saved me a lot of money. I appreciate it!

[@richardsvacuumcenter]

Glad it helped!

[@leeanne7173]

Thanks so much, it was challenging for me to do, but thanks to this video I got it fixed.

[@amyclark2136]

This was a great video. It helped me fix my vacuum. My only wish was that you re-assembled in exact reverse order. My small screws were slightly different diameters, and evidently I flipped them. While my one hose screw is in there, it doesnt seem to have only lightly grabbed so I suspect I accidentally used the wrong one and bored it out. It's still holding, and if it does come out I'll find a fix. Other than that, really nice detail. Vacuum is running like new again.

[@davidhughes3051]

Thank you for posting, fantastic instructional video. I thought you're framing was fine, even reconnecting the spring shot.

[@jamesbroadhurst8447]

Great video and guidance. Job done after I'd diagnosed the issue. Works like brand new again ! Thank you !

[@rhondabarnet9813]

Great video. My giddy aunt...what a hideous job and not one many people would be able to do. Definitely need the right tools to start - the T8 screw was one not readily on hand. We found many of the pieces/parts difficult to access and manipulate and the job took wayyyy longer than expected. Excellent that we were able to break it down into the individual sections to complete. We are both pretty handy and when finished ... vowed to never ever buy a DC50 again!

[@datadotwo]

Thanks. I was able to replace my tube. Had trouble at first until I watched your video again more closely to see where all of the screws went.

[@jayarrsteiner]

Amazing. Thank you.

[@paulbenzley4549]

excellent video , we used it to fault find our problem , buy a new part and fit it - all works perfectly now like brand new ! thanks so much !!

[@kyjj24]

Very helpful and saved me having to buy a new vacuum

[@serajmuhammed3942]

I had a problem with my Dyson DC50. I believe I have suction problem. Before I open the parts, I will do basic cleaning and see what happens. I will reach out to your channel try to get more help from you. Thank for giving me the courage to even touch it. Bye for now.

[@ianhall2444]

Thanks. This video really helped. I noticed though on the UP15 Mag (UK if that matters) there was an extra plate blocking the spring from popping out. So, it's easier to remove the other end of the spring than shown in the video on this model.

[@richardsvacuumcenter]

Thanks for the input!

[@mimi7914]

Thank you SO much for this video. I was able to successfully do this with your help!

[@thomasharrison405]

Thanks

[@SimonStubbs-ll2di]

Most helpful, couldn't do it without your help. Thank you so much.

[@wicket402]

Thanks!

[@richardsvacuumcenter]

You’re welcome! Thank you

[@dirtlover2005]

Thank you for this post. Just followed your guide stage by stage 👍 much appreciated.

[@user-cv2vv2oz6n]

Thank you so much for this video as I was able to replace this hose. It would have taken 10 minutes if not for taking the spring on and off. It added another hour lol. It was very difficult and did not slip off and on as easy as yours did. It did not push on and off with my finger, I thought I was going to bend it. I had to use a small flat head screwdriver to push on and off. The post was notched somehow. My DC50 has a gold canister top, maybe a different design? Thanks again!

[@dirtlover2005]

Thanks

[@bradleymccormick6706]

Thanks!

[@richardsvacuumcenter]

Thank you very much!

[@yiddoroe9661]

Great video. Exact same issue for me, the split in hose only visible when NOT in upright position. The giveaway for me was a high pitched whistle.

[@charlesbaker7355]

I am not sure I can do it myself I think I will get a vacuum cleaner repair person to do it for me. Thanks though the video is awesome and very detailed.

[@vanbrabant1]

fantastic, so very helpful - thank you. I used it on a DC50.

[@K8EVY]

Great video, very helpful. Many thanks Kev

[@nenaxen]

10:56 I am not 100% sure but ***maybe**** that clear ring from the edge (hold by pointing finger) needs to be removed exposing adhesive prior to pushing top part into the position allowing rubber with exposed adhesive to attach firmly and securely into the position also hold by aligned groves? (Just a thought, I could be wrong and ring adhesive attached clear plastic ring should not be removed)

[@richardsvacuumcenter]

The ring is to make an air tight seal for the suction to not leak. It can be removed but that point will likely leak some suction causing a slight reduction in performance

[@MrTwidget69]

Thank you for the great video, am having to replace mine. very good step-by-step process.

[@julielaughlin6183]

My change over hose is fine, but it is not seating fully to give full suction to the sweeper head. Will replacing the hose fix this or is there a spring that has weakened somewhere? Thanks.

[@richardsvacuumcenter]

Is it the original hose? Did you verify no objects were stuck inside preventing from moving fully?

[@julielaughlin6183]

Original hose and nothing blocking.

[@HenryBakhtiari-e7j]

Thanks for the video. It was very helpful for me.❤❤❤

[@theprivatepass4262]

Thank you very much - really helpful video - once replaced the vacuum was like new.

[@ianhall2444]

Thanks

[@luiscorrales]

Thanks!

[@colinharwood5257]

Saved me l thought it was going to be new Dyson after your video l will put the money saved to a 65 inch 4k tv thanks

[@MissAussieChick84]

Thanks so much for the video! Was a great help and all fixed now!

[@plunder1956]

this is very helpful, but please check your shot framing, because key parts are out of shot.

[@richardsvacuumcenter]

Thanks for the feedback. It was my earlier videos with very little experience. I had already finished the repair and sent it out the door before I reviewed the footage 😭🤣

[@plunder1956]

@@richardsvacuumcenter I can understand. Some Dyson bits are very tricky to dig out & that link tube looks designed to wear out.

[@mach1111]

Great video. I have a DC9, which is almost the same machine. When I popped the spring, which you show at 4:34, the post which held the spring snapped off. On the DC9, it's a replaceable part, held by 2 screws. I cannot find a schematic parts or parts numbers schedule for the DC9 so that I can replace the plastic part. Can you help with that? Thanks very much. I hate to lose the machine for lack of a $2 part.

[@babichino]

Thanks! Our DC50 is back to new!

[@willandrews6570]

Great video! Made the repair easy.

[@WinstonPatterson-i4v]

Thank for the video. Very helpful.

[@vvraithz]

I have the new piece on and all the tiny T8 screws in place but my gasket doesn’t form a good seal. It’s like the rubber gets caught in the upright tool position and it doesn’t go down far enough in the carpet position. Any tips?

[@richardsvacuumcenter]

What cov did you buy? Replacement or genuine?

[@vvraithz]

@@richardsvacuumcenter it was a replacement on Amazon. I also tried cleaning the dust from the area with rubbing alcohol while I had it open. Maybe it will get better with time? Even with small gaps it works better than before so I might wait and see before I redo my work.

[@JohnBurns-j1g]

VERY Clear instructions

[@andreah6175]

Hi, great video but I'm still trouble shooting. I looked over a Dyson Total Clean vacuum, new hose, filters look good, no apparent obstructions in any of the hoses nor wand nor in the roller bar area itself. I'm not getting suction thru roller bar area nor at the hose handle. When everything is removed and I turn it on the Motor sounds good and at the top of the ball is very strong suction & air exits the side where the filter attaches. I feel no suction where the roller bar attaches. I have tried both handle positions (upright & down) I am baffled cause I see no obvious issues, the part you mention in this video appears to be in working order. Do you have any other suggestions? Thanks in advance : )

[@richardsvacuumcenter]

Check in the center of the cyclone where the debris needs to travel to enter the clear bin. I often see clogs right inside there.

[@mbris812]

This looks very similar to the up15. Is there a chance they are the same model?

[@richardsvacuumcenter]

I believe this is the same as the up15.

[@stevenbrowne7990]

Very good instructive video . Makes this seem possible even for me 😂👍

[@chrisu55]

Great video, thank you for sharing

[@kathlynzajacleblanc1057]

What if you don’t need the whole thing just the rubber gasket that is attached to the part of the hose that flips back and forth ? Please help Can’t find it 😢

[@richardsvacuumcenter]

I'm not aware that the gasket is available separately. However, trust me, if the gasket is broken, it's a matter of time before the hose splits. Just replace the whole hose.

[@Lilacia5126]

What do you do if it's not creating a seal properly? I've followed your video and it creates a seal perfectly at the top, but not at all at the bottom.

[@richardsvacuumcenter]

Hmm just double check everything.

[@johnmaasz244]

Excellent advice and demo thank you.

[@patrycjabergmooser3994]

My hose is bad but also vaccum makes loud sound would that possibly fix both issues?

[@richardsvacuumcenter]

Replace your hepa filter and the cov hose. That should solve both issues

[@davidcouling7490]

Thank you very much for your excellent video and explanation - was a great help....cheers..

[@alxmcdonald1]

Where can I get the rubber washer for the top?

[@richardsvacuumcenter]

The top of what?

[@itsshripal]

Great detailed video

[@frandalpiaz3366]

I have the exact opposite problem the floor and carpet have decent suction, but the tools through the wand has little to no suction. Should I replace this part?

[@richardsvacuumcenter]

Make sure your wand isn’t clogged first.

[@yiddoroe9661]

The entire wand and hose are easily removed to check this. At the base of the hose where it connects to the ball there is a red clip that you push to release the hose. You'll need to take off the dust collection bin to see the red clip that you depress like a push switch. To put it back on just push the flexi hose back into position, you should hear a click when it seats.

[@bater1abater1a]

Richard, I've got a DC41 (Same System) and it's missing the COV hose's Rubber Gasket. Dyson doesn't have parts for that model any more. Any way to get that part someplace else?

[@richardsvacuumcenter]

You will have to replace the entire COV hose. Unfortunately it looks like those might be harder to get. The last time I looked for one they were selling for $60!

[@TheMidlifeIntrovert]

We found one of these vacuums on the roadside collection and it had an identical fault. Bought the replacement part from Amazon for $20 AUD (shipping from UK to Australia). Just fixed it today, and all working! Thanks mate!

[@jilla.8798]

cannot find the screws to fix it. Purchased on ebay, don't fit. Not at Lowes, Tru Value, HomeDepot, Dyson, vaccuum repair won't sell them to me. help

[@richardsvacuumcenter]

What screws are you referring to?

[@jilla.8798]

a long one in the side ( a clear view of it in your video at 0:42) . I cracked and took it to the repair guy. $129 for a screw (and they will throw in a tune up). Im still interested in where to get these course thread 6x32 408a Grade 4 or 5 screws. thanks @@richardsvacuumcenter

[@rtraweek17]

where did yall order the part?

[@richardsvacuumcenter]

Check description

[@michaelwhite9056]

Dyson DC50 Internal Hose Cuff Seal Vacuum Cleaner how to replace it please

[@tasfish1]

I’ve replaced the hose but it still isn’t picking up? When I check, the hose isn’t right against the vac when in floor position, I don’t know what to do now? 😭😭

[@tasfish1]

Or simpler put, the valve isn’t lining up flush when in lowered position, there’s a massive gap.

[@richardsvacuumcenter]

@@tasfish1 I would recommend taking it out and installing it a second time paying close attention to each detail. I'm not quite sure what the problem is based on your description but most likely it wasn't installed properly.

[@user-sc3qf2gh1n]

Thanks. It’s great video

[@Lolguy88]

Great guide, thank you

[@gladysperez-almiroty1760]

I must have installed it wrong! It has a lot of suction from the “exhausts” on the top of the ball, but none from he hose or tools. Help!

[@richardsvacuumcenter]

Check for clog inside the center of the cyclone.

[@gladysperez-almiroty1760]

I got it to work perfectly now. Just set you a tip for your assistance.

[@danielcase253]

Thanks man. that helped

[@thedysonvacman5516]

Can do video on how to do one on a dc41 please?

[@richardsvacuumcenter]

I'll put it on my list and when one comes in I'll be sure to record it! Thanks for the request.

[@thedysonvacman5516]

@@richardsvacuumcenter Ok thanks👍

[@richardsvacuumcenter]

@@thedysonvacman5516 just uploaded it today!

[@thedysonvacman5516]

@@richardsvacuumcenter Thanks

[@ОлегАлейников-б1э]

Все предельно понятно. Молодец!

[@mr.vacuum3439]

Thanks for this.

[@Ecksterphono]

Great video. I've noticed with a lot of these internal hoses and changeover hoses, that have breaks in them, that they are yellowed. I think the common problem is that people are using these for wrong application purposes and going to town on heavy soiled or slightly damp carpets that have been shampood and not dried properly or vacuuming animals slightly on the wet side or lack of filter maintenance. Another thing is, heavy smoking households causes this as well. I have a DC 43 upright, which was properly maintained. Never vacuumed drywall, filters maintained, never seen moisture for the most part. And never vacuumed oily substances like spilled coffee grounds in the kitchen or even sticky sugar particles which can chemically take their toll on plastics. Moderate vacuuming is good. Proper shampooing of carpets should also take place so no dried chemical residues get left behind. I've maintained a lot of Dysons and most households have super heavy carpets and they rent out shampoo vacuums like rug doctors and don't do a proper initial cleaning. Dysons should never be used in finishing jobs of shampood carpets. If any residual chemicals go through those cyclones this could centrifuge unwanted gases out of the residual chemicals used. Hence cyclone separators are also used or were used in the coal and gas industry to centrifuge not only harmful particles out of the air but also gases. Cyclone separator technology is also used in the perfume industry to extract essential oils out of plants. I've never seen this issue in properly maintained uprights and my DC 43 is a circa 2012

[@annpowell5796]

Thanks

[@AdrianaManzo-rf2gm]

Thankyou so much

[@gardenrose264]

Very fidely. It's putting it all back I will struggle with. ......

[@richardsvacuumcenter]

Yes re assembly is always the trickiest part!

[@HorribleHarry]

THANK YOU!

[@jacktoy3032]

I called the Dyson service phone number today and was told that this part is not available for purchase by an owner of a Dyson vacuum. It can only be repaired at a Dyson Service Center.

[@richardsvacuumcenter]

Link in description

[@bikramoz]

Thank you

[@d.p.9567]

I’ll never buy Dyson again. The most plastic garbage vacuum ever. To think Dyson was attempting to manufacture a car! No thank you!!! 😂😂😂

[@gardenrose264]

Do you work for Dyson???? 🤗

[@richardsvacuumcenter]

No I don't.

[@bristolfashion4421]

The difference between the DC49 which I've got and the DC50 which I haven't is like chalk and cheese....

[@user-pv5pj5ih5x]

GREAT VIDEO BETTER THAN MOST SAVED MY BUTT