Ricoh Color Copier Error sc363, sc362, sc361, sc360 Problem Solved

[@lukmontemitope1600]

This is very helpful, thank you 🙏

[@MrRicoh]

@lukmontemitope1600 I'm very glad I could help you. Don't forget to subscribe to my channel. Best regards.

[@DUCTHANHCOC]

great, i did it, thank you!

[@MrRicoh]

Great!

[@jawahar990]

Faired message Than what to do

[@MrRicoh]

Any details?

[@genessis5739]

Hey, this video can help is the error is sc362? According with your explanation is for sc363, please answer me

[@MrRicoh]

These are codes that have a common solution in the copier, so the movie deals with both error codes. Good luck with your photocopier repair.

[@Elharouchelmahdi]

Bien bien

[@MrRicoh]

Greetings from Poland Części do kopiarek www.copy-expert.pl/ Facebook: facebook.com/Copy-Expert-113431678801597/ Części używane www.copy-expert.com/

[@gallyouko]

Thank you so much!

[@MrRicoh]

Thanks for your comment. Each opinion is important to me because it helps me understand the expectations of my viewers. Thanks to this, better and better films about repairing copiers and printers are made. Greetings.

[@ronnybordon5124]

Excelente vídeo muchas gracias funciona

[@MrRicoh]

Thank You !

[@jesrizanijan5976]

hi...if appear code sc361.. at mpc4503.. and the bar k(black) colour is gone.. how to fix and why ya

[@MrRicoh]

HI, 1. TD sensor connector missing check 2. Check whether there is any error in the TD sensor harness (disconnection, etc.) 3. If the sensor is defective, replace the development unit.

[@navitalaituragaluvu5606]

I have mpc3502 it display sc364 will this help

[@MrRicoh]

The PCU must be replaced - the TD sensor is defective. Thanks for your comment. Don't forget to subscribe to my channel.

[@stilluarts958]

I have this ricoh mp c305 equipment that this error appears can you guide me what error SC301-04 can be

[@MrRicoh]

Replace the Drum Unit Magenta, or repair or replace the charging rollers in this unit.

[@rociofernandez4794]

Hola Tomasz! al querer ejecutar forced line position me sale "failed", podrias ayudarme? mucha gracias

[@MrRicoh]

I don't know what exactly you want to do and what model of copier do you have?

[@asgharalishah4427]

thank you brother ,

[@MrRicoh]

Thanks for your comment. For me it's very important. Subscribe to my channel if you can. Best regards. Parts for copiers www.copy-expert.pl/ Facebook: facebook.com/Copy-Expert-113431678801597/ Used parts www.copy-expert.com/

[@wzkpolwzkpol8081]

2111 wyskakuje błąd. Po sprawdzeniu 2-194-10-12 także error. Bład jaki pokazuje urządzenie Zawiadom serwis: SC361-2

[@MrRicoh]

SC361-2 to problem z TD sensor, czyli sprawdź jaki licznik ma Developer Unit. Może już trzeba go wymienić na nowy? Nie wiem co to jest 2111 i 2-194-10-12 ?

[@wzkpolwzkpol8081]

@@MrRicoh a gdzie to sprawdzić ? 2111 robiłem reset tak jak na filmiku a 2 194 10-12 sprawdzałem.

[@MrRicoh]

5 prostych odpowiedzi dotyczących problemów z developing unit znajdziesz moim najnowszym filmie z napisami: kzbin.info/www/bejne/eoatdYuPmdhpY8k

[@youssefzakaria3636]

i have sc 285 in ricoh mpc2015 what should i do please

[@MrRicoh]

there is no single solution, I have had this problem many times and most often after the Drum Unit or Laser Unit replacement. Be sure to write how you solve your problem because it is interesting.

[@mixxerman7020]

whats problem plz guide

[@MrRicoh]

There is everything in the film. what else do you need

[@elmohandestechnologym.y9894]

نرجو منك الترجمه الي اللغه العربيه في جميع الفيديوهات

[@MrRicoh]

سأفعل ذلك في المستقبل. أدعوك للاشتراك في قناتي. 👍👍👍

[@mujeebhousenew5883]

i have code sc367 on ricoh mpc2500 please solve it

[@MrRicoh]

This is a TD sensor error. But this sensor is hardly ever damaged. Replace developer and perform copier maintenance - problem will be solved. I also invite you to subscribe to my channel.

[@udara8717]

How can i resolve sc 396

[@MrRicoh]

According to the theory, you have a damaged IOB board, but often the problem disappears after replacing the drum unit. Check the drum unit because it may be blocked

[@elmohandestechnologym.y9894]

We hope that you can translate into Arabic in all videos

[@MrRicoh]

I will do it. Best regards and invite you to watch the next movies. 😁😁😁

[@mahmoudnagah6255]

I have sc error 375 with ricoh pro c901s

[@MrRicoh]

It is possible that you have a used developer Yellow or drum Yellow. Replace these items. Description of the fault: TD sensor adjustment error: Y. During TD sensor initialization, the output value of the black, magenta, cyan, or yellow TD sensor is not within the range of the specified value (default: 2.5V) ±0.1V Causes: • TD sensor harness disconnected, loose or defective • TD sensor defective Remedy: 1. Check the harness connection of the TD sensor. 2. Replace the TD sensor.

[@mixxerman7020]

c is fail not complete ?

[@MrRicoh]

why?

[@mixxerman7020]

@@MrRicoh same problem in mpc 305 spf c and a not exicuted but fail

[@salomonsiebetche69]

Same problem here and I still don't understand " WHY" je ne comprend le pas pourquoi...

[@stilluarts958]

erro e ricoh mpc 305 RICOH ERRO SC 361-04

[@MrRicoh]

@stilluarts958 Description: TD sensor (Vt) upper limit error 1: Ye The Vt value upper limit of the yellow TD sensor (SP3210-004) exceeds the specified value (SP3211-002) for the specified number of times (SP3211-003) consecutively. Causes: Black, cyan, magenta, or yellow TD sensor disconnected. Harness between TD sensor and PCDU defective. Defective TD sensor Remedy: 1. Check the black, cyan, magenta, or yellow TD sensor connector and harness between the TD sensor and PCDU. 2. Check the drawer connector. 3. Replace the defective TD sensor.

[@yurytatiana3389]

cuando intento cualquiera de los comandos que dices me aparece failed! que puedo hacer

[@MrRicoh]

what's your copier error?

[@multiservicessen9357]

@@MrRicoh Uwccj CH v,h,vv,h,+CV,jv,cvcjchjv,u,ujujuhvjj,jjc+-h-h+77++jj7uuuuuh777uuuu777777+7uj77777--7777-+7+++++++u++77+++j+jjj+-jh-jjh7++++++++++7+88777+8-+-+,

[@genessis5739]

@@MrRicoh the same thing happened to me, it says “failed” the error is Sc 362

[@سرمدكريم-و8ل]

I get failed

[@MrRicoh]

Reset alone may not help. Have you repaired or cleaned anything?

[@سرمدكريم-و8ل]

@@MrRicoh no I'm not that teachincal at printers

[@stefankorner125]

i have sc 361 in ricoh mpc300 what should i do please

[@MrRicoh]

Clean the TD sensors or replace the developing unit with different colors.