RICOH color copier MPC3500 MPC4500 Error sc580 sc581 sc582 sc585 sc586

[@keops7395]

Hola Tomasz.... Muchas gracias por compartir esta información... Te saludo desde México.... Tengo una MPC 6004, seguido aparece el código sc581-01......de acuerdo a tu experiencia que es lo que podría estar ocasionando éste código ? Agradecería tu respuesta.... Saludos cordiales.

[@MrRicoh]

Debe comprobar la unidad del fusor. Desmonte las carcasas, limpie el separador, reemplace los termistores y tal vez el problema se acabe.

[@keops7395]

@@MrRicoh muchas gracias Tomasz.

[@Nickos08rev]

Thomasz congrats once more for another excellent troubleshooting procedure!but the machine is MPC4000/5000,not 3500/4500

[@MrRicoh]

If you are 100% sure, I will change the description of the movie. It's a very old video, so I don't remember it anymore.

[@Nickos08rev]

@@MrRicoh 1000% yes,its clear- looking the fusing unit and the "open & close" guide,up the duplex unit

Parabéns ótimo vídeo saudações do Brasil

[@MrRicoh]

🤓 😎 Obrigado e saudações da Polônia 🤓 😎

[@bitzone1069]

Hello, I have error code SC582, I tried to reset the error code with Clear Modes but it does not work, what else can I do to solve the problem? Thank you

[@MrRicoh]

You need to fix fuser first, not reset. Possibly damaged fuser film and thermistor.

[@wmelon141]

Hola, toque el termostato de la unidad y me salio el error sc 582. ¿ podria sacar la unidad y desarmarla para sacar el termostato y medirlo con un multimetro si no hay continuidad esta pegado, darle unos golpes en una parte plana del lado negro y deberia de escucharse como un cascabel, volver a ver si ya tiene continuidad y volver a montar.? Eso lei se efectivo, agradeceria su ayuda. Ricoh mpc 4501.

[@MrRicoh]

Hay una solución más para este problema del termostato. Tienes que ponerlo en la nevera en el congelador durante 2 horas. Por lo general, está bien después de eso, porque el bimetal vuelve a su lugar.

[@camilos3535]

Si, se desarma y se saca el termostato y se golpea, no es necesario bajarla completa ahí colgada se puede sacar.

[@mohamedamaturay8740]

where can i buy Ricoh black toner mp c4501

[@mohamedamaturay8740]

I am in Sierra Leone

[@MrRicoh]

Really I don know.

[@mohamedamaturay8740]

where can i buy Ricoh black toner mp c4501. i am in sierra leone

[@MrRicoh]

Nie wiem

[@typhoon05]

That's the easy bit. Trying to then feed the wires back through on the new unit is a right pain in the ...... lol

[@MrRicoh]

Yes. Popular copier malfunction and very time consuming.

[@rodneypatrick2148]

i realize I am kinda randomly asking but does anyone know a good website to stream new movies online?

[@brentleylegend8964]

@Rodney Patrick meh atm I've been using flixportal. Just google for it :D -brentley

[@rodneypatrick2148]

@Brentley Legend Thank you, I went there and it seems like they got a lot of movies there =) I appreciate it!!

[@samsengsamsung8281]

I have face problem this machine sc443...i realise that i short ih board with my fingger than this code is appear. Is it posibble?

[@MrRicoh]

Yes, it is possible.

[@enda4524]

hello Tomasz I always have difficulty for the Ricoh mpc3500 copier of which yesterday I sent you the message practically now I am trying now to solve but the problem is that the functions of the display control panel are blocked I saw that the yellow toner almost exhausted even if the light toner is not turned on the system status tells me not detected the percentage could be the toner pump? could you give me some information thanks a lot hello Tomasz.

[@MrRicoh]

Most often, the cause of such a failure is a damaged toner pump. If you replaced the yellow toner and the copier has a problem all the time, replace the Toner Pump. This is a popular failure ...

[@Ramyhadad1]

Nice work

[@MrRicoh]

Please, and I invite you again to our channel. If you have any questions, please write to us under the film.

[@alvaromartinez7416]

Tengo ese problema en una 5001 el codigo sc582 si hay q cambiar algo ahi

[@MrRicoh]

Buenos días sc582 RICOH MP5001: IH inverter current error at power on. The output current from the IH inverter does not reach the proper value when the IH inverter turns on. Causes: Disconnected power input terminal 1 and 2 Defective IH inverter Defective IH coil unit Defective fusing unit Remedy: Check the power input terminals 1 and 2. Replace the IH inverter. Replace the IH coil unit. Replace the fusing unit. Saludos Części do kopiarek www.copy-expert.pl/ Facebook: facebook.com/Copy-Expert-113431678801597/ Części używane www.copy-expert.com/ Serwis kopiarek Ricoh Warszawa sprintprintserwis.pl/

[@jeancarlossapatieri1568]

Eu tenho um cliente que dar erro na colocação dá unidade fusor Ricoh mp c3500

[@MrRicoh]

Sim, é um problema comum. O fusor deve ser removido e verificado quanto a danos. Além disso, certifique-se de que várias pessoas não estejam tentando instalar um fusor de outra fotocopiadora.

[@jeancarlossapatieri1568]

@@MrRicoh tá com a unidade de fusor nova

[@gagiva7]

why you open so much cables/covers just for fuser codes

[@MrRicoh]

Hello, Because in this case it was needed, I wanted to show the whole interior.

[@احمدفيزياء]

السلام عليكم .. رجاءا عندي طابعة ريكو mpc 305 ..المشكلة التي فيها ..الشاشة تعمل بشكل طبيعي بحيث تظهر ان هنالك خلل رقمه sc144 جميع الموتورات والمصهر لاتعمل بحيث لاتسمع لها اي صوت من بداية التشغيل حتى اطفاء الطابعة .. اعتذر على الاطالة مع شكري الجزيل لكم

[@MrRicoh]

Description: SBU Communication Error • Connection to SBU cannot be confirmed. (Connection detection error) • Cannot communicate with the SBU, or the communication result is abnormal. Causes: • SBU defective • The other side of the communication (BCU, IPU etc.) defective • Power/signal harness defective Remedy: 1. Turn the power off/on. 2. Reconnect the power/signal harness. 3. Replace the following parts: • Replace the SBU board. • Replace the IPU board. • Replace the BCU board. • Replace the power/signal harness.

[@MuhammadAqeel321]

Hello my friend how are you plzzz one video for me, Ricoh MP C4500 machine error code 580 plzzz I'm waiting for you

[@MrRicoh]

Behind the fuser there is an inverter with sensors. You need to clean it with alcohol or replace it.

[@robinsonsanjuan6983]

buenas tardes amistad el error sc 442 que viene siendo en una mpc 5000

[@MrRicoh]

Hello, Error sc442 in MPC5000 ricoh means: Image transfer belt contact motor error. The image transfer belt contact sensor does not detect the movement of actuator at the sensor while the polygon motor rotates. • Dirty image transfer belt contact sensor • Defective image transfer belt contact motor • Disconnected connector of image transfer belt contact sensor or motor • Disconnected cable You can do 2 things: 1. Replace the image transfer belt contact sensor. 2. Replace the image transfer belt contact motor. Good luck www.copy-expert.pl

[@robinsonsanjuan6983]

buenas noches amistad donde lleva el sensor para limpiarlo

[@contactjoybe5012]

Hi, Your presentation is not complete, make another video to complete it. Thank you.

[@MrRicoh]

❓ ❔❓ ❔ ok

[@Mr-Every]

Sir g mp4501 sc 534

[@MrRicoh]

Look this: www.copytechnet.com/forums/ricoh-savin-gestetner-lanier/40808-sc-534-ricoh-mpc7500.html

[@alaaalaa-iv4ov]

Nice work

[@MrRicoh]

Thank you very much and I invite you to watch our other films.

[@karemshady3320]

Nice work

[@MrRicoh]

Thank you. Greetings.