SC 565 RICOH Aficio MP C2500 (solved)

This SC 565 occurs every time when the machine is in standby (Cause is one thermostat from hot roller )
WWW.RICOH-SERVICE.RO

[@tunaspadu6330]

565 or 562? That screen panel tell sc562?

[@luca3034]

Could you give me, the characteristics of the thermistors, I would like to replace them with new ones. I can't see (in the video) if it is only one thermistor or two together , I would like to know if they are NC or NO, Which is the working temperature ?

[@ricohservice6653]

Hi! Why do you want to change it?

[@ricohservice6653]

This is the code (AW11 0055 Thermostat - 146c/147c)

[@ricohservice6653]

of the pressure roller

[@luca3034]

are you sure it is enough, to pound on the table, the thermistor to solve the problem in RICOH Aficio MP C2500 with error SC 565. ?

[@ricohservice6653]

Yes! The thermistors have two black pills. those pills must be up, in this case one is up and one down. Touch that pills and you will see

[@theflipchannel964]

This error is tricky... comes up every 5 or 10 minutes.... even if you do the "COPY SP" thing and turn off...

[@حمادهفتحى-غ3غ]

السلام عليكم ....عندي طابعة ريكو 2500 وعايز أعملها صيانة شاملة يا ريت لو تفيدونا أنا من المنصورة

[@eugeniocastellanoscordova6594]

Amigo tengo una ricoh mp c2500 que cada vez que la prendo o abro la tapa me alimenta toner negro y eso hace que se tire fuera de la unidad de revelado provocando que caiga toner sobre el cristal del lazer y me salgan las copias borrosas de la esquina que podra ser soy tecnico en copiadoras canon pero estoy checando esta a color de mi hermana

[@sikandarali9712]

Sc552 kese Hal ho ga

[@zakariyamohammad5262]

Vary thanks

[@koraykil7277]

u can make wire.its short ))

[@ricohservice6653]

:))) I know but it's not safe for fuser

[@andreasrudolf3698]

@@ricohservice6653 how can I make wire?

[@yohanavarjana8201]

it grate

[@Global_collect_serviceGlobal_c]

Voilà le 566

[@jamesjeanmary564]

sc 672

[@CFCF69]

I know how to solve this problem. Any doubt contacts me and I give you the procedure.

[@naikkyy]

Celso can you Help me with this Problem? i already Cleaned all sensors