RICOH MPC 2011 ERROR CODE SC202-00 || RICOH MPC 2011 ERROR CODE SC101-01 ||

Got SC 220-01 on this mpc 2011
First change polygon-engine and bicu card..
still 220... then IPU board. still 220.
Then change compleat LDB (laser unit).
still 220-01.
Then I change back to old laser unit.
At the same time I open right cover and put out the fusing-unit.
Start up with the cover open.
Now SC 992 apper insted.
What ever I do from now I only gor SC 992.
I can go to sp mode...
I try uppgrade firmware, but I can only choice firmware, when I press update button the machine just beep... think the 992 is in the backround.
I have checked the fuse on the PSU.
My next step is new controllerboard.
Any one got an idea what to do next?
Tags: None
SC220 error on RICOH AFICIO MPC 2051
SC220 error on RICOH AFICIO MPC 2011
Ricoh mpc 3002 SC 220-01
SC 220-03 On Ricoh MPC305
Error sc220 ricoh MP2851/3351
Error sc220 ricoh MPc2011
Laser Error SC202 SC203 SC204 sc210 SC220 Copier RICOH MPC3002 RICOH LASER error code SC202 SC203 SC204 SC205 SC220 SC221 RICOH color LASER ERROR SC200 SC202 SC203 SC204 SC210 SC220
Removing the laser optics housing unit RICOH Aficio MPC3002 MPC3502 MPC4502 MPC5502 and Installing a new Polygon Mirror Motor and Drive Board
Before removing the old laser optics housing unit
Do the following settings before removing the laser optics housing unit. These are adjustments for skew
adjustment motors in the laser optics housing unit.
1. Plug in and turn on the main power switch of the copier.
2. Enter the SP mode.
3. Execute SP2220-001 to clear the L2 lens positioning motor setting for Magenta.
4. Execute SP2220-002 to clear the L2 lens positioning motor setting for Cyan.
5. Execute SP2220-003 to clear the L2 lens positioning motor setting for Yellow.
6. Exit the SP mode
After installing the new laser optics housing unit
Do the following adjustment after installing the new laser optics housing unit.
1. Plug in and turn on the main power switch.
2. Adjust the main scan magnification only for black (Bk).
• Input the standard value [A] provided with a new laser optics housing unit for the main scan
magnification adjustment with SP2-185-001.
• The value [A] is different for each laser optics housing unit.
• Print the test pattern (14: 1-dot trimming pattern in the SP2-109-003).
• Check that the left and right trim margin is within 4 ± 1 mm. If not, change the standard value
for the main scan magnification adjustment.
3. Adjust the main scan registration only for black (Bk).
• Input the registration value [B] provided with a new laser optics housing unit for the main scan
registration adjustment with SP2101-001.
• The value [B] is different for each laser optics housing unit.
• Print the test pattern (14: 1-dot trimming pattern in the SP2-109-003).
• Check that the left trim margin is within 2 ± 1 mm. If not, change the registration value for the
main scan registration adjustment.
4. Select "0" with SP2-109-003 after printing the "1-dot trimming pattern.
5. Do the line position adjustment.
• First do SP2-111-3.
• Then do SP2-111-1.
4. Replacement and Adjustment
230
To check if SP 2-111-1 was successful, watch the screen during the process. A message is
displayed at the end. Also, you can check the result with SP 2-194-10 to -12.
6. Exit the SP mode.
After you replace the housing unit, do the adjustments in the following section of the manual: Image
Adjustment - Registration.
Laser Diode Unit Assy RICOH AFICIO MP6001 MP6001SP MP7001 MP7001SP MP8001 MP8001SP MP9001 MP9001SP / Gestetner MP6001 MP6001SP MP7001 MP7001SP MP8001 MP8001SP / Lanier LD360 LD360SP LD370 LD370SP LD380 LD380SP LD390SP / D0621859 D0625151 D062-1859 D062-5151
Reinstall the polygon motor RICOH Aficio MPC2030 MPC2050 MPC2550
Before removing the old laser optics housing unit
Do the following settings before removing the laser optics housing unit. These are adjustments for skew
adjustment motors in the laser optics housing unit.
Plug in and turn on the main power switch of the copier.
hastag:
#ricoh #Ricoh_sc_220
Contact us: Helpline
Email : [e-mail]
KZbin Search By @thecopierworld
Editing Tools:
1- Editing By Kinemaster
2- Thumbnail Making - Adobe Photoshop 7.0
3- KZbin Library Music Used - Fun Kid - Quincas Moreira.mp3
4- End Screen Make By Kinemaster
----------------------------------------------------------------------------------------------------------------------
If You Liked The Video Please Do Subscribe My Channel Keep Supporting Me So I Can Continue To Provide You With Free Content Each Week !!
----------------------------------------------------------------------------------------------------------------------
====================================================================

[@premsagarbarnwal4601]

Aap ka contact number?

[@thecopierworld]

In description link