Embroidering Small Letters On Caps | Best Threads & Needles | Ricoma Embroidery Machine (EMB Hub120)

[@LanceMcGrew]

I don't own a Ricoma but sure do learn a lot watching your videos

[@ricomatv]

That is amazing to hear, Lance! Thank you so much for watching.

[@supraobey17]

Man, all these little details you explained make a huge difference. Thank you !!

[@ricomatv]

Glad to help!

[@amyhughes8739]

I absolutely enjoy watching your video's. I have a Brother PR1055X but all your videos make so much sense and I am able to apply them to my own projects. Thank you for all your tips and tricks of the trade. Keep them coming.

[@ricomatv]

We are glad it helps. Whenever you’re ready to upgrade your machine, we are here to help.

[@karencarr5440]

Your videos are so educational I, have watching and learning so much. Thankyou, and sharing your knowledge.

[@ricomatv]

Thank you so much for watching, make sure to subscribe to our channel!

[@phototec]

I love your videos, much better than other presenters. Very complete and lots of details.....Thanks

[@ricomatv]

Glad you like them!

[@miltonclayton7645]

A lot of good pointers! Thanks!

[@ricomatv]

Glad it was helpful!

[@Engineerboy100]

Loads of great information, Wow, Thank you so much for putting this together!

[@ricomatv]

Glad it was helpful!

[@youmanneedsound]

i learned a lot on this videos. Thank you sooooo much Godbless to your Team

[@adrianacontrerasesquivel343]

Me asombra la forma perfecta de bordar y sublimar de esta maravilla de máquina de última tecnología y la impresionante destreza con la que la manejas...Te felicito desde Chile...

[@ricomatv]

Gracias!

[@anadeliabravo8372]

Thank you so much,Willie 😘

[@ricomatv]

Any time!

[@user-mw8hn4bq8b]

I know, that this is already a bit older, but would still love to get that file to try it on my TC 1501 🙂

[@ricomatv]

Hi! Were you looking for the Ricoma 3D Puff file?

[@user-mw8hn4bq8b]

@@ricomatv Yepp

[@user-mw8hn4bq8b]

@@ricomatv so would appreciate if you could share it again :-)

[@gingko4me1]

Now we need a video showing how to set this up in an embroidery software program :). I’m a newbie still learning Chroma

[@ricomatv]

you can watch out chroma videos here -> kzbin.info/door/8S6rH8vVsEH_D64lklGTFA

[@enayatullahmohsenzada2771]

Good night dear .for small letters embroidery just I change the needle and yarn or any other thing is more

[@ricomatv]

Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery & Business Printing Help. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroideryprintingbusinesshelp

[@Bakerfamilyvideos]

Love your videos

[@ricomatv]

We appreciate the love! Thank you for being a part of the Ricoma TV family!

[@KryzAthenaB]

How do you match the thread color from the software to the machine so it detects automatically which thread color to be used?

[@ricomatv]

Hi! This would have to be in the digitizing.

[@msabarez]

Thank you for very informative tutorial. Is the needle 65/9 a sharp or ball needle? It looks like on the video it is ball needle, FFGSES.

[@ricomatv]

Hi! We recommend using sharp!

[@HannahCanfield-me8im]

What needle and thread do you recommend for foam trucker hats? And what about for the mesh side? Thank you!

[@ricomatv]

75/11 will work just fine. You can always use the titanium 80/12 which are a little stronger if you need them.

[@ramonamckee5367]

Stitch bottom up and CENTER OUT - and your underlay is what locks the hat to the stabilizer to prevent the slippage that can happen - and provides support to your upper thread. Your underlay is your foundation - You have no foundation you have an unstable house.

[@ricomatv]

Thanks for you input! Embroidery isn't one size fits all so its great to have different techniques and alive everyone can follow.

[@dannyblaqvideos]

Thank you. If I have Chroma Inspire, where in the tools menu(s) interface do I designate the underlay, in the digitized file?

[@joshuabickford9060]

Love the movie scene add in at the end.

[@ricomatv]

Haha thanks! We thought it was fitting!

[@annahumphreys1152]

you are always talking about the link in the description below, I don't see it In case you couldn't tell I am very new, in this case I was looking for the richardson cap link

[@ricomatv]

Hi there, you can find Richardson caps at Ottocap.com

[@GapToothKilla]

Hows the ricoma software vs hatch? And can you use it without a ricoma machine D:

[@ricomatv]

Hi! is designed to allow both the beginner and experienced digitizer to create even the most intricate designs with ease and speed. Become a digitizing pro in no time with an easy-to-use interface, tutorial videos, and customization tools! You can use Chroma even if you don't have a Ricoma machine depending on the format your machine accepts.

[@71RBR]

Hi ! I’m using a ricoma EM1010, every time I wanted to embroid small letters the result is horrible !! Just need to know where I can buy thin stitches please ? I can’t find them anywhere Thanks

[@ricomatv]

Hi, we recommend checking if the letters were digitized to be on a cap.

[@mikeruiz1039]

Excellent

[@ricomatv]

Thank you so much 😀

[@shirwilly8126]

I really love your video but please how can i digitize the edge run? Cause i do auto split the stitches i need help on this pls

[@ricomatv]

Hello! We have added the link to another video that might be able to help you. kzbin.info/www/bejne/nnTNdpmId62mi6s

[@muslimahmuslimah6589]

I'm using single needle embroidery machine, embroidering on caps is a big challenge. Tension issues, needle breaks etc....So after all your demo's on this machine, you can send it to me.....lol

[@ricomatv]

Sounds like you need an industrial multi needle machine. Remember we offer 0% financing and require no down payments when you qualify. Our machines start at as low as $130 a month. Fill out the form at this link and one of our product specialists will reach out with more information -> ricoma.com/us/contact-us

[@bigal1225able]

By the way I love your videos

[@ricomatv]

It looks like your comment got deleted, but we don't do customization. However, you can always check our sister brand Garmeo for help! > instagram.com/garmeo_hq/

[@sabrinabradley5010]

Thank you! we are newbie > Very useful information. If you remove an underlay from an object will it cause the embroidery to come loose after awhile?

[@ricomatv]

Not at all!

[@ronnettebolanos9236]

only thing missing--selection of needle and thread part of the design on screen and setup...for the registered trademark and small letters

[@ricomatv]

Hi Ronnette. Thanks for bringing this to our attention! We will be sure to pass this down to the team.

[@chakabd2205]

first of all I love you all! thank you very much for all these tutorials and videos. I am new to the EM 1010 and I would like to ask you a question: the tension of the threads has been adjusted by the technicians with Poly 40 and 75/11 needles. if I change the thread to Poly 60 and the needle to 60/8, do I have to re-adjust the tension or do I leave the "factory" setting? thank you for your reply

[@ricomatv]

Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery

[@chakabd2205]

@@ricomatv hi thanks for your answer i'm already in the group!! .... and i asked the same question.

[@TJOpitz89]

For some reason, so matter what I do I cannot get my MT-1502 to embroider that low on caps. The bottom of the logo is always over and inch from the brim. When I try and go lower I get "y-axis error". It's quite annoying.

[@ricomatv]

Hi there, our service team can help you with this, contact us here> ricoma.com/US/support

[@robertgomez6223]

Good info the foam what millimeters at 2 mm 3 mm? You got really close to the bottom. is there a secret to that. I know certain designs you can't go all the way to the bottom so I'm just wondering is that something you're able to do with all designs? thank you

[@ricomatv]

To learn how to go get lower on your cap contact our support team for extra help -> ricoma.com/US/tech-support

[@neydamedina2631]

if we wanted to embroid on the side of the hat what size needle would that be?

[@ricomatv]

If it's a standard cap you can use the 75/11! But, if you are using a Richardson cap, you should use 80/11!

[@neydamedina2631]

@@ricomatv Thank you!

[@LucyLu70]

Thanks for this video.. For the thread weight 60 did you say to use 65/11 needle for smaller fonts? Now is there a rule of thumb for cap design I thought one of your videos you said the design needs to start from the center out ?

[@ricomatv]

yes! for cap designs, the design should start from the center out.

[@bspurlock760]

What kind of thread? Rayon or poly?

[@ricomatv]

We used regular Isacord thread!

[@armandoocon1401]

Hello I am trying to embroider on a Richardson cap and my neddle keep breaking please advise me , Thanks

[@ricomatv]

Hi there, we have lots of videos on completing Richardson caps like this one here: kzbin.info/www/bejne/eHWpYYSZaJibiqM

[@icey20005]

Very helpful!! But how can i download the design to try it? There is no link for download above!

[@ricomatv]

Hi there, we do not have this file available for download.

[@gunhand1911]

@@ricomatv Why not? I would like to practice using it

[@carlosbarajas382]

Can u please help me I can’t figure out how many mm it is to Emborder a name on side of hat

[@BradPitbull]

Google it

[@ricomatv]

Check out this video for some help: kzbin.info/www/bejne/i3aVaXeKect6oqs&ab_channel=RicomaEmbroideryMachines

[@mmezameza1891]

Great video as always, on the small letters, what font and what stitch did you use? Was that 60 weight and size 9/65?

[@ricomatv]

Yes we used 65/9 size needle coupled with 60 weight thread to achieve best results

[@idareyoutolove]

What size font is this

[@genessa5]

Are you using Rayon 60 WT? That is not easy to find. Is it Polyester?

[@ricomatv]

Although rayon and polyester are man-made fabrics, they are very different. Polyester is a synthetic fabric made from petrochemicals. Rayon is a semi-synthetic cellulosic fiber derived from wood pulp.

[@genessa5]

@@ricomatv which is being used in this video? Polyester or Rayon?

[@ricomatv]

We always use polyester

[@fasloan]

That is good information 👍🏽

[@ricomatv]

Glad it was helpful!

[@paintedpictures6455]

Am I missing something? How did you get the design so low? mine seems to go too high on every hat I try

[@ricomatv]

Hi there! Try to set your design to 90 and the x to 500

[@josemirellanegrete1755]

Oh and how do I make it start stitching from the bottom?

[@ricomatv]

Hi Jose, what do you mean?

[@NAZCON87]

Sir where I can buy that neddles, thread, and the cap?

[@ricomatv]

Hi Naz, thanks so much for watching. Check out this blog for our recommended suppliers: blog.ricoma.com/2019/06/06/top-10-wholesalers-for-all-of-your-embroidery-needs/

[@NAZCON87]

@@ricomatv thank you

[@lnino0313]

When digitizing a logo for a ball cap, do you set the design down to size for cap? I am trying to digitize a logo for a ball cap and I know that it has to be a certain size. And, I am doing a sample on the 100x100 hoop and making jpeg down to 2.25 x 2.5. Am I doing it correct?

[@ricomatv]

yes that's correct!

[@lnino0313]

@@ricomatv When doing the small lettering, do you do a “single” or “double” running stitch? I am working with MasterWorks II software.

[@kronickdesigns2020]

Do I use a 65/9 ball point or sharp? I have a design that is giving me hell with small letters.

[@ricomatv]

sharp point!

[@thegrafixplace3098]

How can you go so low on The cap when I try it’s showing me an error about been to low and stops embroidering and mees up the hat please help

[@ricomatv]

Hi there, contact tech support and they will walk you through the process, ricoma.com/us/tech-support

[@critchee]

Love this stuff.. exactly what I have been looking for an I have some questions.. Can I email you guys?

[@ricomatv]

Sure, ask them here!

[@critchee]

@@ricomatv I just need to upload an image of something I’m trying to achieve but not quite managing.

[@faithfranz9602]

how do you get your machine to embroider that low ,mine keeps telling me im out of the red do I have to do something to get it that low...

[@ricomatv]

Hi there! If you call in to service they can help you get your embroidery closer to the bill of your hat! ricoma.com/US/tech-support

[@saraholivieri235]

What are you using to hold the foam in place?

[@ricomatv]

push pins or needles on either side of the foam, thanks for watching!

[@chemistamericalifestyle2942]

Im trying to buy some needle but my question is what kind sharp or ball point and also whats the difference? Thanks

[@ricomatv]

ball point is great for lighter items like tee shirts!

[@chemistamericalifestyle2942]

Can you make a vidoe of how to rewind a design when a tread break on MT1501 thanks

[@ricomatv]

You just hold the stop button to remind and press it again to stop

[@Victor_Vids]

What's the name of the design program you are using?

[@ricomatv]

He is using Chroma Luxe! You can learn about Chroma and the different tiers of the program right here: blog.ricoma.com/2022/03/17/best-embroidery-digitizing-software-chroma-inspire-plus-luxe-explained/

[@مهدیهمظفری-د5ث]

❤

[@ricomatv]

Thanks for watching! (:

[@cuervito74]

Where can I buy that particular foam?

[@ricomatv]

Any crafting store like Joan Fabrics!

[@lnino0313]

If I may ask, where do you get the 60 weight thread?

[@ricomatv]

you can get 60 weight thread at any embroidery supply store!

[@mmezameza1891]

Madeira is the company I get my supplies and they carry 60 weight thread

[@lnino0313]

@@mmezameza1891 Thank you for the tip!!!

[@ricomatv]

Yes they carry plenty of these

[@mmezameza1891]

@@lnino0313 you are welcome! And Madeira also sells needles and other essential items for embroidery.

[@athm99]

Can I add embroidery to a registered MLB baseball cap? And then resell it

[@ricomatv]

You would have to check out the copyrighted laws when it comes to this and get the necessary license to do this.

[@MariaRamirez-su9dt]

I can't, I feel like giving up. I have already wastes so many caps

[@ricomatv]

Hi, we are so sorry to hear this. Could you give us a bit more info? Or if you would like to share pictures please send it to our main IG --->@Ricomahq

[@bestprintableprint5248]

Looks tight....

[@ricomatv]

Thanks so much for watching!

[@Alishaspieces]

Can u get this file?

[@ricomatv]

This file isn't currently available, but thanks for watching!

[@dannythemusiciancrafter3280]

Surely I would have broken 8 needles minimum using my TC 1501 :D

[@ricomatv]

if you're having issues with needle breaks, contact support for help -> ricoma.com/US/tech-support

[@grindgraphics9954]

I would have never embroidered a Richardson 110 on my TC1501 especially not at 1000 stitches per minute

[@rafaelnavarro4504]

@@grindgraphics9954 why is that?

[@joannpadia]

I must be missing something, but you never gave any tip on how to get lettering close to the brim!

[@ricomatv]

Hi! It's all in the hooping! You can contact our tech team for more help and to walk you through it! ricoma.com/us/tech-support

[@rabiarani9400]

How mush priz

[@ricomatv]

For pricing information, fill out this form to be connected with our product specialists -> ricoma.com/us/contact-us

[@bubbacole1129]

Would these steps work on different software programs. Like hatch ?

[@ricomatv]

There might be some difference, but it should work!

[@shahnazakhter609]

How mach price

[@ricomatv]

For pricing information, fill out this form to be connected with our product specialists -> ricoma.com/us/contact-us

[@elevated-apparel]

I thought auto digitizing is not good

[@ricomatv]

Different techniques work for everyone, it depends on what works for you and, of course, the design you are working on.

[@uriel11ful]

This digitizing may work but is not recommended at all. Make sure it starts center bottom and goes outward in each direction. The digitizing shouldn’t go side to side. Make sure to use a good software like Wilcom for digitizing.

[@ricomatv]

We use our own software chroma for digitizing. As long as it works for you, there are lots of techniques out there everyone can try, this is what works for us!

[@uriel11ful]

Make a video with flat embroidery on caps with a large fill area in the center to see your digitizing and embroidery quality.

[@BradPitbull]

Good job my nigga

[@ricomatv]

Thanks for watching!

[@rabiarani9400]

Ho parsys thes mcin

[@ricomatv]

For pricing information, fill out this form to be connected with our product specialists -> ricoma.com/us/contact-us

[@videoforgeeks]

Profit potential: This cap costs $5 and the materials including the foam, thread and needles add up to about $1. Cost per cap = $6 Caps like these are sold online for around $30, meaning you can make a profit of around $25 per cap. Ricoma machine = $10,000 = 400 caps to break even....ugh.

[@ricomatv]

Thanks for sharing!

[@videoforgeeks]

@@ricomatv Great info! I have the way bottom from your machine...Brother SE-400 It just doesn't have the accuracy like the beauty machine you have.

[@amaliagutierrez4906]

🤯wow...I'm going to try it

[@ricomatv]

Thanks for watching! Make sure to post a picture of your creation and tag us on social media!