Ride Along to Nahoon

[@Lubyagin]

Наконец-то новое видео! Почему так долго не было? Я всё ещё жду внедорожные поездки с крутыми подъёмами и полным раскрытием потенциала пониженной передачи. Привет из Тюменя (Сибирь)!❄️

[@FishingEasternCapeSA]

I have channels so been spending time fishing. I will make more bicycle videos bit by bit. I won't take the bicycle offroad as it doesn't have an air filter.

[@Lubyagin]

@@FishingEasternCapeSA Если не по бездорожью, то будет ли возможность показать хотя бы по дорогам с крутыми подъёмами? Скорость - это хорошо, но тяга не менее интересна⚡️

[@MotorizedBicycle1]

Ok i will go find some steep hills around town for future videos

[@Op1zilla]

Bike Sounds Great, I just had to Drop a notch on the needle like you did the other day but I Still had to order a 25 pilot for 21mm pwk, Thanks for the South Africa Ride, Hope to See more 🚴💥☁☁☁☁

[@MotorizedBicycle1]

Some days it just runs a lot better than others. I think it may just be they way of the 2 stroke. Weather dependent.

[@theLyzhendricks]

Fr some fays i get 35 others its 32 its so hard to stay consistent ​@@MotorizedBicycle1

[@theLyzhendricks]

Ur bike sounds so good reminds me of old school american enduro bike

[@mikemiller3303]

Looks and sounds awesome brother what engine you useing and how fast you were passing cars cool beans brother ride safe

[@FishingEasternCapeSA]

Thanks brother. Engine details in the video description. This bike passes cars uphills sometimes too 😅 jackshaft kit ftw 💪

[@Littleevil9975]

Great video bro what motor you running

[@MotorizedBicycle1]

Thanks. Motor details in the video description.

[@lancesudberry209]

Love dat Black and yella ⚜️ natural nawlinz Louisiana uSa❤

[@crazyanimal1997]

My bud, is this a second channel for your bikes? Siiiiiiiiiiiiick!

[@Josiahduhon-nh2yz]

It's the real thing 🎉

[@mybikes1970]

Sounded awesome mate! Time for me to try a jackshaft!

[@theLyzhendricks]

If u can build a bike like this it would be awsome u already got some bad ass bikes but one with a shift kit quad be insaine

[@lancesudberry209]

Can't tell you how many times taken shoulder/ rocks from doing greater speeds on highway passing through bars cars leaving bar pulling out in front me . Edit usually passing them up at even slowing down speeds.

[@lancesudberry209]

😂 your wide open 4th gear ?? What size motor is that thing? Beautiful job BTW 💯 the lack of edit weight and speed is diffence of use of spatula M8 being if your the negligence of wrecking into or if something plows you ! Be safe they really don't care to SEE you either way❤

[@MotorizedBicycle1]

Its a falcon 911 so about 80cc if i remember correctly. Bike really wasnt running well that day. I think it was because i used old fuel. I have 10 gears. Get to 9th gear flat out on a flat surface. I can do about 60km/h up the steepest hills in town, probably about 5th or 6th gear but i dont keep track.

[@dynomania]

Looks like a very nice middle class town. Just a few aimless locals hanging around just like here in Australia 😂

[@alexhidalgo3723]

Hello beautiful bike, could you explain to me how you have the motor chain connected to the pedal?

[@MotorizedBicycle1]

It makes use of a cross shaft, also known as a jackshaft

[@alexhidalgo3723]

@@MotorizedBicycle1 thanks

[@Vega2077]

hey bro, a question, did you buy the exhaust or did you manufacture it and if you manufactured it, tell me what engine you use and how you managed to get involved in that and create mine, I have been watching videos about it and I see that it is not easy to make an exhaust of those barians about many things and I want to know how to know the right length and width of the cone to know when to apply the counter pressure

[@MotorizedBicycle1]

Howzit bud. The exhaust is an MZ65 which i purchased from USA. I had to heat and bend the exhaust to make it fit the frame nicely. The silencer is a generic carbon and stainless steel canister from aliexpress. I lazer cut the and welded the stainless steel adapter flange and tube. The base motor is a pk80. Flacon 911 cylinder. Mlre details can be found in the descriptions of some of my other videos

[@Vega2077]

@@MotorizedBicycle1 Thanks bro, I want to make one of those exhausts for my bt100 engine.

[@MotorizedBicycle1]

Definitely look at adding reed valves coupled with an expansion pipe. Makes a huge performance improvement.

[@Vega2077]

@@MotorizedBicycle1 ok, I have thought about adding a boost bottle or "yeis" for the low and medium revolutions for a bike but I don't know if it is a very good modification

[@MotorizedBicycle1]

I wouldn't waste time with a boost bottle. The consensus is they don't show any improvement.

[@ЕгорКрамер-й6ю]

Which is the top speed which a high gear? And which is a cruise speed?

[@okpapaokpapa4590]

bro i need help!! i finally managed to make one like this but i have a new problem... when i stop accelerating it still accelerates and makes a huge noise. could you help me please?

[@MotorizedBicycle1]

Joh bud that's a little difficult to diagnose given your description. Where is the noise coming from? What type of noise? If it keeps accelerating once the throttle is rotated back to closed position, then your cable or throttle slide could be sticking.

[@okpapaokpapa4590]

@@MotorizedBicycle1 hi sorry I didn't see my notification. the problem doesn't come from the acceleration cable, I already looked at this problem...

[@MotorizedBicycle1]

Is it not tue revs that are climbing? I was thinking you were still in gear and it was accelerating. If you are speaking about climbing revs then you probably have an air leak. When the bile is reving, spray some brake cleaner around the sealing area's of the intake, between carb and and motor. Then revs will change if it sucks it in through a vacuum leak. Then you found the problem.

[@okpapaokpapa4590]

@@MotorizedBicycle1 ok thanks i think i solved my problem. but now there is a new problem... fuck it never ends!! what size idle jet do you use? my idle is completely bad!

[@MotorizedBicycle1]

Jetting is a usual part of motorcycles. To ask me what jets I'm running wont help you as my build is vastly different to yours. Any bike needs to be jetted correctly and its very much unique to each bike. Part of the hobby and a skill which needs to be learned as its very important. Its not a problem, its a standard procedure.

[@MandeepBadgujer]

Top Speed ?

[@MotorizedBicycle1]

Before i did the falcon 911 and 21mm oko upgrade we clocked it at around 85km/h on a flat. So probably around 90km/h or more on good day. Not sure. Downhill, just way faster than I'll ever need to go because it has 10 gears. 10th is just way too fast to feel comfortable.

[@MandeepBadgujer]

😯😯👍👍

[@adamcromwell2898]

Another stop sign runner.

[@MotorizedBicycle1]

This is Africa boet. Bicycles don't stop at stop signs . I do however if there's a car coming.