How-To Build a Skatepark - Quarter Pipe Part 2: Studs and Framing - Manual Labor

[@Mtaalas]

Use screws unless you're not worried about how tough the quarter pipe needs to be. And remember to drill pilot holes for the screw unless you want to crack your 2by4

[@luvwwe]

i know i had really hard time building one and this guy is great at what he do

[@spencereng]

Screws take longer than a nail gun, but are better for multiple reasons. Mainly, if you ever want to make changes or repurpose the wood the takedown is a lot easier, and you won't have to pound out all the nails.

[@jkulesha]

2x4's crowned up are just FINE but i can see why you use 2x6's for long term heavy duty use but as far as a budget goes if you use 3/4'' plywood the seperation between studs if every 8'' is plenty with a 2x4'.

[@ByCrail]

Question is how many plywood and 2x4 do you need to build one quarter??

[@cncbuss1]

Very sharp carpentry skills there Jonah Owings! If someone wanted to build one of these (for younger kids) and make it a 5 or 6 ft wide ramp instead of 8ft, do you think 2x3's would be sufficient instead of 2x4's ? I'm thinking of making a 3ft high ramp for my 9 y/o and doing just that since I've already got a bunch of 2x3's. (Lumber is expensive here in Canada). I would still space them every 8" and use 3/4 inch plywood for the tranny's. It would also make the ramp lighter for easy displacement to and from the driveway. Your opinion? Those with trash talk can abstain from commenting.

[@jonahguinn7036]

Claude Bussieres My name's Jonah too!

[@impreza9726]

Holy Fuck lets wait another two weeks to watch a few min again!

[@haydenbennett8941]

How do i get into doing this for a living?

[@xjustinjx]

these come out every week?

[@mrbogadotcom]

The only similar comment from last weeks episode was - Why this video wasn't when i WANTED to build, but not when was BUILDING. That was the only similar i saw.

[@yungmemeboi]

yeah, usually you'd have a flat bit in between the 2 quarter pipes as well

[@rednut416]

if you wanted a halfpipe, would you just made x2 of the quater pipe?

[@studiopk2004]

rednut416 yes but you would have to add a ground otherwise you would just stop between the 2 quarters

[@skatepunkap]

Dude. I need to build one of these

[@kyranbrockett3242]

How much will the whole thing cost

[@joe4282]

How do you find wood that isn't warped or twisted?

[@philmoiz]

find the lumber yard where the contractor goes, fresh pallet is the way to go and build it right away dont let it twist

[@crazycargaming9823]

How thick plywood

[@Moto421]

Why is the camera trying to enter your nose all the time?

[@bb_tv820]

Moto Fourtytwo B.B.

[@rikohudak9122]

Please what is the dimensions the quarter pipe how long how width how high pleaaaase

[@LiamTheTerrible]

Why on earth is he using a nail gun? Surely screws would be a thousand times better?

[@philmoiz]

way faster

[@LiamTheTerrible]

@@philmoiz but screws hold properly

[@christopheremanuel5063]

Pro trick : you can watch movies on Flixzone. Me and my gf have been using it for watching a lot of movies during the lockdown.

[@vincenzomario3196]

@Christopher Emanuel yup, have been watching on flixzone} for years myself :)

[@PapoEdits]

i wanna see it xD can u upload some images? PLS

[@szymonbedowski3581]

How much is it???

[@TheAustrianRetards]

i´ll never build one, but hmm watch it every sunday

[@Andresrodriguez-gj6re]

thats sick

[@GillesA99]

check the previous manual labor vid

[@fulach2]

cool

[@KNbmxer51]

how do you draw the trani?

[@mrbogadotcom]

Why this video was not when i was building a quarter pipe?! :D

[@NovaFbTv]

come on winters coming soon.

[@williamharper9356]

Hitachi nail gun only way to go!

[@MattOliveiraSurf]

maybe its essencial to be good at building ramps......conclusion: lets go grab some pigs xD

[@skateboy102]

yee

[@leonmoss]

beacuse you copied that comment from last weeks episode

[@grimjoy20]

ok lets be serious here has anybody that watched this video actually plan to make this??

[@TheBang666]

if you have no stapler, you're in the shit... x)

[@POVACTIONSPORTS]

MMMMAAAAANNNNUUULLLLLL LLLAAABBBOOOORRRR:)

[@xjustinjx]

how'd you get likes with that gramar :p

[@PiGuyisaPiMan]

how dare you say that about his wife >:(