Nice work. One of the best finish carpenter's I've seen. I personally wouldn't have that gap in the scaffold boards.
@ronallen65786 ай бұрын
I was thinking the same. I don't care how careful or familiar you feel, an extra 2x6 or 2x8 filling that huge gap sure wouldn't hurt. Safety 1st😊😊
@napoleonsmith77936 ай бұрын
Yeah. I would have run one more row too.
@Lugnut640526 ай бұрын
He needed that gap for the laser on the floor.
@syringconstruction98256 ай бұрын
Dude you are almost completely responsible for my career at this point… thank you for sharing so much. Truly
@InsiderCarpentry6 ай бұрын
I appreciate that!
@Shotsmoky6 ай бұрын
I will never work as a trim carpenter, yet I watch every video Spencer drops. That should tell you something about the professionalism of this young mans work. Great work!
@timothysmulders87326 ай бұрын
Im just a basic finisher myself, finally found a good company too work for and just did my own first ridge beam last week, was joking with my boss about how you have a video for everything that i try to apply to my work. This will help in any future jobs now! All your videos are awesome as someone who is trying to improve every day!!
@InsiderCarpentry6 ай бұрын
Glad to help!
@mnbrown256 ай бұрын
These excellent videos are exactly why I maintain a monthly payment to the Insider Carpentry Patreon account. Thanks Spencer!
@InsiderCarpentry6 ай бұрын
I really appreciate that. These more in depth videos aren’t as popular with the algorithm but I make these types of videos with the professional or aspiring professional in mind. 👊👊
@douglasbrown34936 ай бұрын
The best finish carpentry channel on YT. Thanks for the education!
@brucestuart81806 ай бұрын
You rock Spencer! I’m glad you show the reality of real trim work, not just the easy stuff when everything lines up perfectly……cause that almost never happens. Lol Thanks
@earlybro196 ай бұрын
The biscuit joint cut through the edge of the miter is genius!! I will be using that trick from now on. Thank you
@rickteeden86566 ай бұрын
Brother man, I have seen you do some complicated projects in the past, but this has to be most complicated yet. To be working at that height , lifting heavy oak planks overhead, scribing them, mitering them, biscuit joining them and getting them dead on accurate is mind boggling.
@egar47676 ай бұрын
I’ve been watching your videos for some time now. I have always admired your level of expertise at such a young age. Genius exists at all level of arts, professions and trades. You are an example of one. The devil is in the details. Your planing methodology is amazing. You remind me of myself when I was your age. Take it from an old guy like me. Congratulations!!
@adamweinstein5056 ай бұрын
Appreciate the time you take to make and share the videos. 30’ up on a scaffold is hard enough without the video and is a testament to the dedication to your trade. Well done.
@barrysc196 ай бұрын
You the man! Thank you so much - I’ve learned an incredible amount from you that has helped me better provide for my family. I appreciate you!
@InsiderCarpentry6 ай бұрын
Glad to help!
@genebean8375 ай бұрын
Thank you for taking the time to film your work and share your expertise. I know it makes the work take much longer. We are DIYers and we learn so much from you!
@Michael-kf6bc6 ай бұрын
Hats off to the crispiest miter I've ever seen. Working above your head is especially tiring by the end of the day. As always your work looks amazing. I'm looking forward to seeing what else this has in store.
@PaulMikna6 ай бұрын
I think it's beyond most homeowners' comprehension how much effort it takes to work on ceilings.... As a drywaller/painter it's just so much harder than working on walls, so I can't believe how much prep is needed to put up the scaffolding before you even cut a piece of wood! It's easy to say, "Let's do this on the ceiling", but so much harder to actually execute it.... Well done, Spencer! You truly earn every dollar you make!
@flubber271006 ай бұрын
Absolute amazing days work, and doing it on your own that high - true respect
@marconumero94814 ай бұрын
Great vid. A situation that happens a lot, it's when you have a 2 in difference between two ends, especially when branch beams are involved.
@mikemccarthy60816 ай бұрын
These finish carpentry vids of yours are great. First one I ever watched was on fitting stair treads and it helped me out a ton. My buddy is a professional carpenter and also really enjoys your videos. He is the reason I started watching. It was comforting that you referred to the mitered edge of that ridge beam as a 50 lb razorblade instead of a guillotine🙂
@zephyr14086 ай бұрын
I would hv eaten my lunch right there and a 10 min nap! That was a great view & a perk! When we were kids if you did something really amazing we said “ THAT WAS BOSS”. Spencer even though you started out in the hole ( framing out or blocking) you hammered it home! “ THAT WAS BOSS” from one small time finisher to the real deal thank you! Great video !
@amycyclenut6 ай бұрын
I always learn so much from your videos. I don't imagine I will ever in my life put up a beam , but you never know when I do do something where these tips and technique will come in handy.
@Timcompton-rt4rx6 ай бұрын
BRAVO Spencer ! Proper planning prevents piss poor performance ( as we used say in my day ..lol) Congrats on another great job & video)
@TheOfficialSoulPower6 ай бұрын
Impressed as always...and blown away that you tackle such a tough job so calmly! Makes me wish I was younger so I could go as deep into this trade as you have. Great video and awesome work. Thanks for sharing!
@markgazelka84936 ай бұрын
You are the master carpenter as well as a brilliant instructor. Well done!
@rickyborden32876 ай бұрын
I've hung 12' drywall on a ceiling by myself, but I don't think I'd tackle that by myself, and if I did it's hard to imagine I'd make it look anywhere near that good. Amazing work as always!
@woodturnermark85296 ай бұрын
Beautiful job ! Like you I have always preferred to work alone, but in this case I would have enlisted a helper, working over your head a such a high level, the weight of the material and to still achieve the level of quality that you demand of your work I think a helper would have be a great aide. Thank You for sharing your tips, awesome work once again !
@leemarzahl88916 ай бұрын
Spencer! Another AWESOME technical video! You are an AWESOME craftsman!
@carpenterdallastx6 ай бұрын
Excellent Work! I respect your beautiful, wonderful and amazing works.
@papabash6 ай бұрын
Let me start by saying you do amazing quality work. You are truly blessed with the opportunity to showcase your talent . Whomever you apprenticed or worked with or for taught you well. As a retired trim/architectural woodworker carpenter (old timer) i would like to add the following to the comments 1-Definitely have a fully planked platform to stand on @30' also maybe worth adding stairs to the scaffold with hatches to make it easier to go up and down repeatedly with tools and equipment'. 3- Rips of White oak plywood would have been lighter and more stable less likely to bow and twist. 4- I know you'd rather work alone ,and it may be difficult for you to work with a partner or helper but in the long run you will benefit from it. 5- Just my pov keep up the good work Spencer your clients are lucky to have you ! keep the sawdust videos coming i look forward to them all
@rayhosking39276 ай бұрын
Great work Spence, I could no more work at that height than fly, (or do that detailed work even 6 ft of the floor, terrified of high places) but I really love watching you do it, I've picked up a lot of tricks on other aspects of carpentry from your channel. Looking forward to watching as you progress through this "monster" of a house!
@jfinaz996 ай бұрын
Whoa, I just watched your high-wire act and it was impressive; ain't nothing like skill & confidence to get the job done. Great work!
@stevenfoust37826 ай бұрын
Looks awesome and totally safe imo. Glad to know it really can take multiple days to achieve perfection rather than just go fast to get it done.
@gnusndn3016 ай бұрын
As an old retired finish Carpenter I'm amazed at how well you work in the air. I wonder if working up high and trying to hold things by yourself, if a couple of swivel headed c-clamp vise grips would have assisted you well. Obviously it's easy for me to say stuff but I have used clamps quite a bit over the years , to temporarily hold things until I can use a more secure fastener or have a better position to attach it. I'm sure this is not a new message or concept to you obviously with all the clamps that you have and use. I really appreciate your thoughtful and calculated way about going about any project to do it the very best you can. Thank you for having the patience to do the videoing of this project for us. Good work !
@michaellatour98526 ай бұрын
Amazing video as always Spencer. Thanks for all that you do!
@kylewyates6 ай бұрын
another comment, its one thing to be up on staging like that, by yourself, with razorsharp lumber tossed around (no gloves), no think about holding the camera up and trying to keep things in frame with the middle gap in the planks, all while he looks like hes calm as on the ground on his knees. not easy! not for everyone! bravo you get the bigger man award for this one.
@jeffchandler55206 ай бұрын
I really enjoy your vids. I have learned tips here and there from them, which have saved me time and heartache. Thank you.
@brianbostock16986 ай бұрын
Absolute perfection,as usual
@EliWaters-rc6rq6 ай бұрын
Good job Spencer, thanks for the great video! I think your staging looks very safe, I’d walk on it! Safety.
@henrypeisch52896 ай бұрын
It was not shown in the video but before you installed your two layers of FJ Poplar to pack down the framers blocking, good practice to pre-drill and drive some long framing screws to secure the framers blocking to the actual ridge. Otherwise, your Poplar is only as secure as the framers blocking and scribes and everything below is at the mercy of that connection.
@sanfranceltic75786 ай бұрын
Love the show and the quality of your work. I would say that what dictates the height of your beam would be a measurement up from the top of the window trim intersection on each end . Not a level plane from end to end. I could well be wrong though....it happens quite a bit..Thanks again.
@joeshmoe89126 ай бұрын
Seriously beautiful, my man. You are a master at your trade.
@tc91486 ай бұрын
Wow, amazing work, looks terrific.
@MichaelCZUSA6 ай бұрын
An excellent video again, Spencer. Thank you for taking the time to share your skills in finish carpentry. Trade education is important no matter the level the tradesman is at presently. You certainly have helped me become better in the trade and in business. Besides that, if it weren't for you, I'd still be squeamish about getting a little PL3 on my fingers🤣
@brodiewilson43776 ай бұрын
Looks great Spencer. Awesome content as always. Cheers
@flammarama6 ай бұрын
Nice presentation, terrific, accurate work.
@BWIL25156 ай бұрын
I've watched you do these before and they always look great
@craigmcknight12796 ай бұрын
Awesome Work!! I will continue to watch and take your expert advise!!!
@michaelnilson98766 ай бұрын
Awesome instruction, thank you!
@lennyadamowicz76426 ай бұрын
Looks awesome! Great tips!! You Da Man!! 👊🤩
@josephmasini64886 ай бұрын
Awesome work Spencer, but I would have had that middle section filled on the scaffolding, I know the pieces are expensive. You could have put a 3/4 ply across the gap and on top of the planks. Don’t take chances, no matter how good you are.
@bobbray96666 ай бұрын
The use of a miter lock router bit is really the way to go for beams and columns joints. Makes the install so much easier and faster. Titebond glue and a pin nailer for stain grade wood makes the joints seamless and strong and no worries about the joints opening up later from wood movement. Even if you glue and nail two 45 degree edges, the glue will never be as strong as consistently as glued tight fitting lock miter joints. Just make sure you route the correct orientation for the bottom board so it connects by pushing up to connect and not by spreading the two beam sides apart to fit the bottom board in.
@OmarGarcia-bi7jq6 ай бұрын
Excellent video Spencer
@georgecisneroz5976 ай бұрын
Extraordinary craftsman.
@solorado6 ай бұрын
For cleats I've been using a 2x6x16 ripped to width and 1/2" OSB continuous ripped to depth screwed to sides. Easier to get straight and you don't have to worry about cleat location because it's continuous. Love the Jamb Master for the taller and double hung doors. I reversed the method for shimming. I use a 3/4 x 2 router bit that sticks out 7/16" ish past door size to make a slot in the stud (careful of nails) and nail OSB in the groves. Same result but you can forgo the gluing. Only downside I have found is you have to be very careful not to run the router into the Aluminum guides. I need to find a longer busing for my router plate.
@InsiderCarpentry6 ай бұрын
That’s a super interesting shimming technique.
@wesselvandorst75306 ай бұрын
Excellent work mate!
@robertprater28596 ай бұрын
Nice work Spencer! I've learned so many tricks for efficiency and tools from you that's really helped me. Thank you! On the ridge issue it seems as though the framer got carried away installing rafters on one side causing it to push on ya. I'll have to make me one of those scribes!
@jaybui75066 ай бұрын
Like always great carpentry works.👍💯
@chippymc6 ай бұрын
Great job, nice finish.
@williampinchbeck43216 ай бұрын
Well done great work!!!
@michaelclean82296 ай бұрын
That's a tough situation to have to make that big of a scribe. It chases you through your side beams your window reveals and lower side walls. Been there before great job love your caliber of work and precision .
@daveklassen9246 ай бұрын
Pro carpenter! Not too bad of a cameraman either lol
@BigJohnson15666 ай бұрын
Slick work for one man. And yea the framer leave s it to the rocker who leave the problems to the trim guy, crap runs downhill.
@markvasko25316 ай бұрын
Oh man, I wish I had a dollar for every time I've said this.. 'damn framers, damn sheetrockers'.. that's okay, I'm a trim guy, I'll make it look good.. 😂
@kylewyates6 ай бұрын
"white oak just hits different" oh brother thats an understatement
@kiwdwks6 ай бұрын
You're awesome Spencer! Challenging for sure. Thanks for the video!
@mattschoular88446 ай бұрын
Awesome work and final result Spencer. Too bad you had to deal with such a framing mess.
@michaelbissen19466 ай бұрын
Hats off, brother!!!!
@miserablesod16 ай бұрын
Great info, great craftsman👌🏻
@marcthibault87236 ай бұрын
Amazing work! 😊
@mojodojo55336 ай бұрын
I keep grasping when I see you stepping around that gap in the walk boards.
@johnseymour82146 ай бұрын
Well done.
@brianweishahn91316 ай бұрын
Excellent work!
@dzaino19866 ай бұрын
Once again Spencer, amazing work that so few can achieve. I'm assuming the electricians left more ceiling fan wire bundled up above?
@InsiderCarpentry6 ай бұрын
Yes, they always leave quite a bit.
@m.a.r.services57206 ай бұрын
Great work
@kennymager42336 ай бұрын
Wow you do great work sir.
@paulbadger63366 ай бұрын
Well done!
@robertbankhead86616 ай бұрын
Great job, But….fall protection? Spencer, please consider it, one missed step and your done. Love the videos and your approach with great wisdom in the process, plus your outlook on process improvement all the time.
@aucomint6 ай бұрын
I do agree 100%. That scared me! When I first looked at the scaffolding I thought I didn't see right.
@IceCat1436 ай бұрын
Nothing like watching a master. Thank you for making this video. I might have missed that part, do the cabinet screws stay visible?
@InsiderCarpentry6 ай бұрын
No. I remove them and nail and use trim screws.
@CorwinBos6 ай бұрын
Beautiful and crazy amount of work. Too bad the framing carpenters totally screwed up with poor framing necessitating all this extra work, especially with the scribing. We did a 60' beam in the peak of a log cabin, but we started with a 24" tall lam beam for the ridge, and left a small opening under the beam for the wiring that had to run inside the beam wrap for lights. So much easier to wrap. We also made sure we held the beam perfectly straight as we setup our roof and framed everything in.
@zephyr14086 ай бұрын
I think the 60 is the one that has the kerfing blade in front ? I just bought the K- pex with the stand and wings ! Totally spoiled now so easy to load and so intuitive! If you get it I would love a review? I am on my 2 nd Makita ( both corded & un corded) and really love them but that Festool ! I think I would love to try one !
@danielbirk25906 ай бұрын
Awesome. Thank you for the video
@thatshould6 ай бұрын
Clean work. The last few times I’ve done this I’ve used the laser to take measurements at 2’ increments and transferred those measurements to the side pieces and connect the dots with a track saw. Not as perfect as scribing it the way you did, but I’m not sure you can tell the difference from 30’ away on the ground. Depending on the height, toting material up and down scaffolding takes a fair amount of time especially working alone. Maybe I’m just a hack…
@jasonhughes69946 ай бұрын
Brilliant.
@frankmgallo6 ай бұрын
Awesome work Spencer. Safety harness is worth investing in just saying if you by yourself. Remember you have a family son.
@casycasy51996 ай бұрын
great job, great tips
@chichidouglas50786 ай бұрын
If the framers do clean work it's a safe bet that beam was bowed because a good roof crew would've set the ridge beam and lined it and then stacked 2 rafters in the middle to hold it straight. Then do that again in the middle of those 2 spans if needed. But if that beam had a 4" - 5" bow in it they'd probably only be able to get half of that out. I've had to deal with that issue and it's not fun. Most of the time those will be glue lambs, LVL, or LSL beams to help prevent that and they're stronger but if they're not stored properly they can warp also
@InsiderCarpentry6 ай бұрын
Good chance that was a part of the problem. It was also ridiculously high with difficult access with the telehandler which I’m sure made it harder to work up there.
@oldtireman46656 ай бұрын
Another awesome job. What blade are you running in your table saw? Kerf? How long of pins do you like for something like this? Looking forward to the other installs that you’ll be doing on this project. 3 hour round trip!! You really must have wanted this one!
@davepro16 ай бұрын
Much easier to start by flattening your ceiling before installing your T&G. Framers always suck on interior planes. It’s not always their fault as the framing material is not consistent.
@lordpaxman6 ай бұрын
Hope you got hazard pay for that! Since you were almost -2” on the end doesn’t that mean the framers didn’t set the ridge beam level? Super nice detail work!
@landonlakes4782Ай бұрын
Fantastic! Curious what you do to finish the cabinet screw holes
@leahprince10166 ай бұрын
Spencer, you demonstrated some great techniques here. One question, how are you going to deal with plumb cuts on your rafter beams NOT having the same reveal at the bottom edge of your ridge beam since the ridge beam is a different size from one end to the other? Will you have to adjust the size of your rafter beams based on the height of the ridge beam where they intersect? Thanks!
@InsiderCarpentry6 ай бұрын
Correct. I showed the finished beams on my instagram stories. I custom scribed each beam, so that each beam flushed out with the bottom of the bridge beam. You are correct, this results and variation in depth on each beam. But there is no other way to do it.
@jacquesemond6 ай бұрын
WOW!!
@hansangb6 ай бұрын
Another awesome masterclass! And that last comment on algorithm made me chuckle. But they should make a netting that can hook in the middle section. Not so much because you'll fall through (I don't think it's wide enough) but to catch tools that you might drop.
@zephyr14086 ай бұрын
By the way the gap in the scaf ? Keeps u on your toes remember what they said in the movie “ HEAT” , keeps me sharp, ready !
@mikeknoll11306 ай бұрын
Great work!
@edover506 ай бұрын
Wow Spencer. Super good video!! Did you estimate 2 or 3 days for the ridge beam??
@InsiderCarpentry6 ай бұрын
Two days max simply because of how high it was and the length. Most ridge beams don’t take nearly that long.
@CardinalVibes6 ай бұрын
I’d honestly give a non vital organ to work with you for just 90 days. I’m in the bluegrass state right below you and I honestly doubt there is anyone here doing/teaching the level of craftsmanship that you display.
@Phil-wt3uf6 ай бұрын
Hey great vids man!! Any suggestions for good vids on squaring the dewalt slider especially on the bevels ??
@FrancoBenincasa-l5r6 ай бұрын
Awesome work learn lots
@dawsondurst1396 ай бұрын
How do clam clamps work with a pre stained trim? Does it leave to much of a mark on the wood?
@charlesstepanian3972 ай бұрын
How did you hide the grk screws used to support the ridge beam? How many do you use? Great work!
@JordanDahmen6 ай бұрын
Beautiful work as always, Spencer. I learn so much watching your videos. Watching you do your biscuit joinery, I'd like to ask if you would recommend a specific brand of biscuits? I know biscuits are imperfect, but I seem to get such wildly inconsistent biscuit thickness with the brands at the big box stores, and it feels like it defeats the purpose of using biscuits for alignment.
@InsiderCarpentry6 ай бұрын
Always Lamello. Nothing else.
@JordanDahmen6 ай бұрын
Exactly what I was looking for, thank you. Of course the original biscuit joiner company would have the best biscuits.
@BH-hy6ow6 ай бұрын
Amazing work as always, but it seems to me that you may have been too worried about being “level” instead of “parallel”. I’d be more concerned with ensuring even reveals with the window trim and the vertical beam joints.
@InsiderCarpentry6 ай бұрын
That wasn’t the issue. The beam was curved and had high/low rafters. That is the reason for the scribe. If setting the beam out of level would have helped I would have. But that was the issue. In the area that I took 2” off on one side of the beam I was only taking 1/2” off in the same spot just 8” over on the other side of the beam.
@BH-hy6ow6 ай бұрын
Ah. I misunderstood what you were using the laser level for. I think I saw you’ll also have perpendicular beams to install. Seems like you might have a bunch of scribing to make those reveals even on both sides. Impressive work as always. I feel like I owe you tuition fees.