Humminbird Solix First Time Setup

[@thomascoyle218]

I have a new gen 4 solix 15, and trying to enter in some GPS coordinates that i have on my other sounder. But I cant for the life of me see where I can manually enter in any marks.

[@ridgetoriveroutdoors]

So I will be up front and say I have only done that a few times and off the top of my head I do not recall the sequence. That said, when I did it, I used the USER MANUAL to do it. Have you tried the user manual? Also, if your super stuck. I suggest Customer Support. Be at the boat when you call or request a call back. Might I suggest using the One Boat Network app and click ask for support. They will even call you back on the weekends. Very responsive!

[@brianbaars1882]

I’m new to this, so excuse my ignorance. I have a 19’ boat with a 12” Solix at the drivers seat and a 10” Solix I can move to the front or the back of the boat. The system is wired and networked together. Do I need to do the custom install (because I didn’t do that) in order for the 10” to be a slave to the 12”? When I have the 10” in the front, the 10” does not read off of my Minnkota trolling motors transducer.

[@ridgetoriveroutdoors]

Brian. I am not tracking on your question. My phone number is at the end of the video. text me and I will call you and discuss your issue. Afterwards, I will typ e a response here so ther can benefit from it.

[@TonyGruber2009]

Great video! I am planning to network two Solix’ units together and was wondering if you have experienced any networking or interference issues, or any other issues with the units. Thanks, Tony

[@ridgetoriveroutdoors]

I have not. Keep in mind the "Rule of 3". As soon as you connect 3 items, you will need a 5 port ethernet hub. So if you have two graphs and you add a 3rd item, such as Minn Kota Ultrex or Humminbird radar, you will need an ethernet hub, specific to humminbird. It is not a NMEA 2000 backbone. Make sure to make up the excess line(s) appropriately. Also, if you are getting any kind of noise on your units, it may come from electrical interference. So, never wire your graphs into the boats wiring. Run its own power direct top the battery/battery switch. Also, make sure the transducer cable excess is collected appropriately.

[@TonyGruber2009]

@@ridgetoriveroutdoors Thank you for the information! I'll try to keep all of it in mind as things come along with my fish finder setup.

[@sadladdd]

wish I knew what this product was but cool video

[@bertalter5811]

How well do the Humminbird Solix work in puget sound?

[@ridgetoriveroutdoors]

Very well! Email me and ask for some screenshots.

[@timothymcvay7286]

@@ridgetoriveroutdoors on the 15 so you have 3 wires connected to the head right. Power. Ethrenet and last one on the right sonar?

[@ridgetoriveroutdoors]

@@timothymcvay7286 Yes, but there is also NMEA 2000 if needed.

[@rongxiaoren6962]

Plz apex16 begging setup

[@ridgetoriveroutdoors]

The setup for Apex 16 is exactly the same as Apex. The differences between Apex and Solix are not in the software. It is the added connections on the back of the unit, ie hdmi in/out, additional ethernet port, etc.

[@rongxiaoren6962]

@@ridgetoriveroutdoors thanks but I have a one question. What to do if the down and side imaging of the Apex 16 shows a text in the center of the screen that say, “Pinging Disabled”?

[@ridgetoriveroutdoors]

@@rongxiaoren6962 turn on pinging. I have a video on turning sonar on and off. kzbin.info/www/bejne/h3m8o5yXjt-Vfs0

[@rongxiaoren6962]

@@ridgetoriveroutdoors I did that on the boat but it didn’t work. Is there other option?

[@ridgetoriveroutdoors]

@@rongxiaoren6962 My phone number is at the end of my videos. Call me today (Friday) at about 10am PST, if possible. Let's talk about it.