RIDGID - How To Bend Stainless Steel Pipe

[@andyjohnson1136]

If you're considering this, consider that plumbing pipe and conduit is measured by interior diameter, not outside. These are sold at 1/2" benders but will NOT fit 1/2" plumbing pipe or conduit that you can buy easily at Home Depot or Lowe's, which has an outer diameter of 5/8" or more (16mm).

[@Sweety-mh7lq]

Wow,that is cool way to make a stainless steel pipe bend!and it looks very beauctiful

[@handtuber3130]

If you are interested, then perhaps you might take a peek at the Handtuber Offset Calculator which can be used to quickly work out offset measurements for instrument and copper tubing in both inches and millimeters.

[@oxtoolco]

Pipe and tubing are two different things. This is a tubing bender. Don't let your publicist title your videos.

[@malikliaqat574]

Hi

[@leothekidwiththedognamedsu6704]

@@malikliaqat574 hi

[@thewhitesheep4156]

@@leothekidwiththedognamedsu6704 hi

[@wellyftw]

@@thewhitesheep4156 Hi

[@alfaalfa2890]

good job. can it be use to bend 16mm, 19mm, 25mm*1mm&1.2mm thickness pipe respectively

[@mr702s]

No part numbers in the description :( I am looking for a bender for 1/2" OD 316 stainless steel tubes.

[@mohammedilyas8104]

Do you video and tool for flaring steel and stainless steel 1/2 inch Thanks

[@adamkwiatkowski4107]

1:29 5/8 ? I though they only go up to 1/2" ? At 0:50 he says the benders only go up to 1/2".

[@muckman5509]

Can it bend that 12mm rod you have there?

[@seantivenan9593]

is the tube used in this video annealed ?

[@ricksantos1891]

Don't expect to bend it like in the video if you use it in 12mm or 1/2" hard drawn stainless steel tube. I just had my 612M and struggling to bend 1.2mm thick ss tube. Have not tried it yet on thinner ss tube like 1mm. Bit dissapointed.

[@EsteemHeadshots]

Will this bend 1/4" galvanized steel rod? I want to make a metal ring.

[@ShowMeWhatINeedToKnow]

For the RIDGID 38048 Model 608: How many inches is it from the bottom of the swing arm (latch that holds the pipe) to the 0 degree mark?

[@dvelectronics229]

Will this smoothly bend 3/8" OD x 0.01" wall stainless tubing without kinking or crushing?

[@lucabianchi424]

If I buy the larger size I can only bend 12 mm pipes? Or even smaller ones?

[@indiancruise12]

if I wanted some garden arches done would you be able to do them as they are wide?

[@justinkendollrozinek]

Your best bet for some thing like that if it's diy would be a sturdy jig for making the same sweeping 180 degree bends repeatedly. Leave excess pipe on either end of the 180. Match up the bends and cut off the excess pipe so they all are the same exact piece. Weld radius pieces to upright pieces. Grinder and paint makes me the welder I ain't. You'll need to learn some math as the jig needs to allow for slightly more than a 180 degree bend to allow for the spring back of the given metal.

[@circuit-maker7971]

Use 3/4 Emt and a corresponding hand bender; the comment about the jig is helpful. I've seen some amazing hoop houses built this way, can make the jig so the top arches a lil more pointy, and the sides straighter. 3/4 Emt is bigger, so you can fasten it to the wall of the garden bed (through bolt or screw), and quite sturdy. Also fairly inexpensive compared to this tiny ss tube.

[@danallured5806]

hi there, fabulous bit of kit, whats the cost of one of these? 12mm, checked the website but just has the pdf downloads,no prices.thanks in advance. Dan.

[@glengullickson6538]

Do you make this for 1"SS tube with a .035 wall?

[@Elite_Installatietechniek]

Can I use it for 12mm copper?

[@vera713]

will it bend 1/2" copper pipe? I hope it does

[@erikvanvechten1289]

I'm very interested in the .750" ratchet bender you offer. Would I be able to bend .049" wall thickness 4130 steel tubing? Thanks in advance!

[@mohammedilyas8104]

Can you send link for the flaring tool please

[@pacman4568]

I can't seem to get a price list for the 600 Series HD Benders is it supposed to be a secret. EDIT I found the price had to go to the end of the buying process to get it.

[@abrarsami5817]

what machine is this

[@imranbutt9805]

Ok nice sir what the price in tools please I will be weting

[@minusyouandme]

Will this work on aluminum 1/2 tube?

[@DinaCraftWorks]

hi can you tell me how to bend hard stainless stell rod

[@sixtysixgroove]

How much is this bender?

[@somebloke5565]

If I we go one more push, instead of 80 degs, can we make a 360 deg stress loop.

[@somebloke5565]

+Some Bloke Sorry typo... 180 to the full 360

[@kslvlkdfhkvhkfviwehbhjhj]

What wall thickness is the tube bent in the video?

[@mikey4016]

Where are they made (i.e. country of origin).

[@adventurebuilt_]

Can I get these tube benders in Vietnam?

[@robjderrick]

How do I bend 5/8" OD type 304L, 0.049" wall stainless tubing?

[@malikliaqat574]

Hi

[@7439norma]

will it bend 1 inch?

[@moonmorth]

can it do a spiral?

[@indramaniyadav6383]

What is rate

[@rosematt3850]

looking for a 5/8 bender with rollers . dose Ridgid make one?

[@masjidminarabbasisteelwork]

Please contact number

[@malikliaqat574]

I'm also looking for thia machine 5/8 bender. If anyone is selling please contact me at 0092-321-4593669

[@jorgecortes2687]

the tube is not 5/8 at minute 0:51 it can be seen that it is 3/8 and the radius of curvature is 5/16.....greetings.

[@howardtoob]

What's a, "chube"?

[@qamarrehman2544]

zabardast

[@DemonsRiver]

That's the basic function but that is not how you bend tube, dealing with the spring back, aiming or angling your bend and leaving your remaining length are a little trickier

[@SurajYadav-hj6mj]

Nice banding

[@shahzoda4660]

Привет эта станог сколка стоид где кагда

[@azbikerider49]

Love how there are subtitles, like people are gonna be like dude what the f are you saying? Just bought and older version of this tool hoping it does the 180 like this one does.

[@peterbuilttough3406]

It's all about leavaridge people

[@tomallen100]

It's tubing, not pipe.

[@calletanopina8745]

Tom Allen watt is the tool #

[@bilalsafdarbilalrajpoot1540]

Tom Allen sir price may send machne

[@rolandedrummer9723]

He sounds like Mr. Bates.

[@gnarlosgnarlos]

nice watch!

[@BrainSOSmoof]

who ever is writing the descriptions needs to learn the difference beteween pipe and tubing.

[@69PlombierChauffagisteRamoneur]

#69PlombierChauffagiste / Bonjour bon weekend une bonne vidéo merci :)

[@malikliaqat574]

Hi

[@davcot3675]

Call it what it is TUBING not pipe

[@tomallen100]

How a salesman thinks tubing is bent. Lol.

[@seanhoffer5332]

That’s not 5/8 , more like 3/8 .

[@shahzoda4660]

Русская писат пажалуста

[@KISSMYACE3203]

I wish these weren't made in China...

[@Mo-rm5um]

That didnt teach me jackshit.

[@conqwiztadore2213]

can i use it to make off set ready rods??