Video covers unboxing and setup of a Ridgid HD12000 shop vac. Please support my KZbin channel by purchasing products on my Amazon Storefront: www.amazon.com...
Пікірлер: 65
@victorpena9523 Жыл бұрын
I almost died putting the damn rollers into place , my hands need 50 months to heal now
@Iscaper Жыл бұрын
Sorry to hear that 🙁
@England_Chris Жыл бұрын
Glad I am not the only one having hell with the wheels. First instructional video that doesn’t go 20 minutes!! Thank you!!!
@Iscaper Жыл бұрын
Thanks Chris for watching.
@thatgirlrobbie26954 ай бұрын
April 2024 & I Thank you sooo very much! I, 57 yr old female, purchased my Rigid Vac, saw the extra parts and came straight to KZbin and just like I knew it, YT NEVER disappoints! I definitely appreciate you for helping me to assemble my vac! Thank Goodness for YT & Thank you Sir for thanking your precious time to enlighten us!❤❤
@Iscaper4 ай бұрын
Thanks for watching!
@cablebill88922 жыл бұрын
Very well done video!! Just bought my first home and my first shop vac. Never been so excited to vacuum something in my life!
@Iscaper2 жыл бұрын
Thanks, my Rigid shop vac is awesome.
@rnsone88272 жыл бұрын
It was a real pain in the a$$ to get rollers into caster feet.
@Iscaper2 жыл бұрын
Sorry to hear that 🙁
@rnsone88272 жыл бұрын
@@Iscaper thank you! I eventually got it, thanks to your video! Great video nonetheless and it really, really helped me! 👍‼️
@taranhagen93812 жыл бұрын
Dude these rollers will not snap into place on mine!!! Grabbing the lube
@rnsone88272 жыл бұрын
@@taranhagen9381 good luck, keep at it, it will go in.
@ThePositron2 Жыл бұрын
Same problem here. I stoop and jumped on the casters and all my weight still won't make them snap in.
@lisagarner8261 Жыл бұрын
I can’t get the casters to snap in either
@Iscaper Жыл бұрын
Push hard and twist as you push.
@Allaboutactioncc Жыл бұрын
@@Iscaper great advice thanks 🙏🏽
@hw14 Жыл бұрын
Can give a tap with a hammer or rubber mallet
@jeffmack45616 ай бұрын
stump on it with your foot
@GK-ee7mw3 ай бұрын
I got stuck here too. Eventually just pushing super hard for a while finally got them in
@gratefulliving5283 Жыл бұрын
I agree with others; very helpful, very well produced, very easy. Good on ya!
@Iscaper Жыл бұрын
Much appreciated!
@hulabird116 ай бұрын
Thank you!! Because of your video I got my shop vac assembled all by myself!!
@Iscaper6 ай бұрын
Great, thanks for watching!
@scorpmoto4 ай бұрын
Thank you. You made assembly easier than reading instructions 👍🏾💯
@Iscaper4 ай бұрын
You're welcome!
@brittaniabrixx2 ай бұрын
Thank you so much I just put mine together
@Iscaper2 ай бұрын
Great, thanks for watching.
@GK-ee7mw3 ай бұрын
What do you do if the casters won’t pop into place? Pushing really hard and they won’t pop in and just fall out
@tomsawyer49013 ай бұрын
Push until they pop in, a really tight fit for sure
@paulgingo71636 ай бұрын
Thanks for the video. It saved me some time instead of looking at the owners manual to 😢 it together. The only problem was you put the handles on the shop vac backwards without a doubt.
@XwolfbaneXx17 күн бұрын
Are you talking about the storage latches? That is how the manual illustrates the install.
@southerngal8034 Жыл бұрын
This saved my life I never put anything together without breaking it lol thank you
@Iscaper Жыл бұрын
You're welcome!!
@larissas0311 ай бұрын
This might sounds dumb but how do you close the whole in the back so the air don’t keep coming out?
@kimkowalewski178611 ай бұрын
Same question!!!!
@ajkash386710 ай бұрын
I googled it and this came up! But right there with you both I didn’t know either lol The hole in the front of your Shop-Vac is used to vacuum up debris and water. The hole in the back allows you to connect the hose to it and use it as a blower.
@saldistadio476111 ай бұрын
Great video the wheel are little hard to snap in need a lot of force
@Iscaper11 ай бұрын
Yes they are.
@hulabird116 ай бұрын
Yep, that took me the longest! But I am not very strong, I guess I shouldn’t have stopped lifting weights! 😂
@saldistadio47616 ай бұрын
@@Iscaper great 👍
@mattcavalli7056 ай бұрын
Did you ever put a muffler diffuser on it or is it ok not shooting a bunch of junk out the back?
@jeffthewhiff3 жыл бұрын
I am a big fan of Ridgid tools as well, Cary, and the vac I bought is a bit smaller capacity than yours, but it works great! Haha, I also noticed that you wear Merrell shoes like me and that's pretty cool!
@Iscaper3 жыл бұрын
Looks like great minds think alike! I love Merrell shoes and have been wearing them for years.
@hildacruz9116 Жыл бұрын
Thank you Sir very helpful!!
@Iscaper Жыл бұрын
Thanks!
@JesseP7 ай бұрын
Great tutorial, only thing that was wayyy more of a process for me was installing the casters, it’s 20 degrees while I’m doing this so go figure
@Iscaper7 ай бұрын
Thanks for watching!
@ajkash386710 ай бұрын
Omg thank you so much for this. Bought one at Home Depot recently they are on sale for $60! Same with a microwave they are selling rn lol. Anyway. Thank you!!
@Iscaper10 ай бұрын
You're welcome!
@AutoHeadz8 ай бұрын
I didn’t get any screws with mine! Wtf?!?
@Iscaper8 ай бұрын
I would return it.
@john678ification Жыл бұрын
Use a hammer for the wheels! They are tough! No complaints overall! Maybe clips instead of the push-in buttons to take off the lid but even then it seems fine!