Riding until 2 stroke blows up!!!!

My second video on this bike and it blows up... This is going to be expensive.. But at least it should be reliable after a full rebuild.
*Editing may cause events to look different than how they actually happened, speedo's may be inaccurate, number plates may be incorrect and signs may be fake or give inaccurate information. Large portions of this video are filmed on closed courses which may resemble or have a likeness to other areas.*

[@clementleworthy5546]

*WARNING* This video contains 2 stroke engine braking. Some viewers may find this offensive. VIEWER DISCRETION ADVISED

[@Juuhimuuhi]

Clement Leworthy haha lots of people getting triggered

[@joet6990]

i'm new to riding so how bad is engine braking, i saw someone say it's really bad for a 2 stroke how about something like a crf450r?

[@superchargedadventures]

joseph mcneal.. For that bike, not bad at all! You can engine brake that baby all day long!! LMAO Just don't engine brake it past normal top RPMs of coarse!

[@filip2425]

I brake by engine And engine is ok (jawa 50)

[@megapet777]

for 4 stroke it doesnt matter. engine brake as much as you want

[@JamesPiccone]

"My motor doesn't sound good,so let's just keep running & Twisting the guts out of it "😂

[@MotoMuppet]

Damn straight

[@williamkee7924]

4 stroke blows up: haha get a 2 stroke loser 2 stroke blows up: its the riders fault

[@MotoMuppet]

Haha

[@El_rod309]

My opinion 4 stoke lasts longer my second opinion a 2 stroke is bad fucking ass

[@jamesdellaquila1939]

@@El_rod309 It's not really an opinion the top end on a 4 stroke does last longer but costs more.

[@El_rod309]

James Dell'Aquila I know

[@vroomvroomjay7790]

He’s riding a 2 stroke

[@velox__]

You're doing a lot of engine braking. That's very bad for a two stroke, because it's not getting lubrication when you're not on the gas.

[@djmystery7235]

Mees I hope it has oil injection

[@MrRonezki]

It still doesnt get lubricated when enginebraking, because oil injection mixes the oil to the gas in the carburator. So its the same as having mixed gas, you just dont have the oil and the gas both in the tank.

[@RcGaba27]

some systems have the "injector" in the intake manifold

[@michele1342000]

Mees Stop talking about engine breaking PLEASE

[@therealakalaska9485]

iv been riding my yz250 for years and do ALOT of engine braking.. still runs great. just ride it till she blows up then rebuild it..... and if the bike is running its getting lubricated. (not as good as on the gas) on the gas or off its still getting lubricated

[@noah_rides8260]

When u start hearing stuff that doesn't sound good keep the rpms low and get your bike home I wouldn't keep riding or try to keep riding

[@MotoMuppet]

I was very far from home. This is the first time the bike blew up so I didn't really know what to expect from the noise :/

[@mummohacker]

Moto Muppet i suggest that you dont ever use engine brake with 2-stroke. Its bad for them, coz they dont get any oil to engine on that time. Start using more normal brakes

[@MotoMuppet]

When this video was posted I was new to 2 strokes. Watch some of my newer videos, engine breaking is minimule now.

[@sciewter]

one word of advice on 2 strokes, if they aren't running right don't run them, something is wrong and hoping for it to cure itself results in piston rings in your exhaust pipe most times.

[@natiivejay07]

mummohacker when is he engine braking I’m a noob so I wouldn’t be able to tell

[@LoudenUp]

I was expecting a bang and a pop, fuel starts to leak and oil, spark comes out of nowhere, mushroom cloud, sirens, woods burning down, massive forest fire, more explosions, fire trucks and planes drop water, unable to stop fire, Whole world gets set alight.

[@tech_of_steel20official]

LOUDEN everything past sparks comes out of nowhere would be impossible

[@thetrailridingchannel8057]

tires blow handle comes off tires fall off wheels fall off

[@markkotishion2379]

Greta Thunberg weeping about the carbon overload as German police officers toss her into a live volcano. Poor volcano.

[@aussiedigger1441]

Any abnormal internal sound's you should shut it down ASAP the motor is only chewing itself apart. You probably caused more damage internally. Maintenance.

[@MotoMuppet]

At the time this was my first 2 stroke bike and I am still learning, I really didn't care if it blew up as I didn't know the condition of the engine anyway due to not having it long. So either way it wouldn't have been long before I gave the bike a full rebuild. We were heading back to the van to go home so I was just going to try make it back. = )

[@Declanpyro907]

I don't get why you kept it running if it's inside you engine id turn mine of almost as soon as I hear it

[@Declanpyro907]

I've got a 1989 dt50 Mx so dw about old bike

[@MotoMuppet]

At the time this was my first 2 stroke bike and I am still learning, I really didn't care if it blew up as I didn't know the condition of the engine anyway. So either way it wouldn't have been long before I gave the bike a full rebuild. We were heading back to the van to go home so I was just going to try make it back. = )

[@MotoMuppet]

I like the look of old bikes, I like new ones too but I wouldn't get rid of a bike just because of its age =)

[@Declanpyro907]

Moto Muppet yeah mate my fist 2 stroke know love old bikes me I'm 16 first road bike see wanted something with gears

[@MotoMuppet]

Enjoy it man :D

[@nathanspilak2219]

"It's minor, just get a new plug.."

[@jackmtbjackmtb6419]

Yep

[@danielfl.9347]

I love how you just keep riding... Like damn. Rip engine.

[@MotoMuppet]

I was just about to do a complete rebuild so I decided to ride as far as I could =)

[@jeffflick2573]

That smoker was on its way to blowing up at the beginning of the ride??

[@adamkorb5321]

hear how it was bogging at the start?

[@theblueguyfromimblue9950]

Lol yeah every one talking bout the engine braking meanwhile it was fucked the whole time

[@Vicscarm1]

And it looks like the bike has no power and doesn’t want to rev these mfs think engine braking is the doom of all bikes yet it looks like the bike has 200 hrs on a top end

[@Thing222]

I remember when my 2 stroke RS125 exploded on me. No one knows the meaning of fear until you're doing 85mph overtaking in the outside lane of a dual carriageway when the big end blows and the main bearings seize and lock your back wheel up. Think fast and clutch in before you hit the tarmac, lol. Always rode my rs with my hand hovering the clutch, because "just in case". Saved me that day.

[@MotoMuppet]

Damn!!

[@Thing222]

Moto Muppet - Damn indeed. Back wheel was locked solid, started sliding for a few seconds before I disengaged the engine with the clutch. Speed went from 85mph to under 50mph in those few seconds before the clutch kicked in. As the saying goes, my arsehole was going 1 pence 10 pence.

[@MotoMuppet]

I bet! That's seriously scary haha.

[@mikeyforester6221]

wickwah definitely a shake up glad your ok pal any biker is a brother of mine keep riding son

[@richcarrier1947]

Nothing better than the sound of 2 stroke

[@Shadow-js2yn]

thats Kapp 4 stroke sounds a lot better

[@frez777]

except a multi-cylinder , two stroke.

[@mxer4life25]

Saw a comment about getting a new bike. Forget that. Just do a top end rebuild. The bike will run like new and it's not expensive or super time consuming on a 2-stroke. It'll take a few hours if you're experienced. And even if you're not I'm sure there's a KZbin video that will tell you all about how to do it with ease

[@MotoMuppet]

I gave the bike a full engine rebuild =)

[@axeami1354]

bet it was running really sweet before it blew, for some reason 2ts seem have a moment where they run ridiculously well just before they blow.

[@drazokk2887]

why's that

[@frez777]

@@drazokk2887 they are running lean. A bike always runs the BEST, then it blows. Facts

[@Sarunguer]

That sound is your piston ring saying goodbye.

[@chevyduramax5689]

Gonna need a rebuild #quadricers

[@MotoMuppet]

It had a full engine rebuild =)

[@scottsleeper9228]

Needs that billstein suspension

[@xxx_codgod_xxxcod2755]

Check 👆

[@mr.finnesseboi6964]

*pops glove* CHECK!

[@Nolz-nr7cj]

HOW TO AJUST ME VALVE CLEARANCES

[@timbomuffin]

So nice to see young lads out the on there bikes in the dust don't worry what bikes your on trust me when your still out there in the mud at 55 all those skills your getting now will be handy keep up the good riding.i started on a 50 cc puch maxi so your already ahead of me 🇬🇧👍

[@dakotaswanson5488]

This is why I tend to avoid two strokes you never know when the engine is going to crap out on you

[@midwestsirens]

Yeah you kinda do... just don't engine brake and listen to your engine closely and you'll know when she's on the way out.

[@monsterr6764]

Lowkey all you gotta do is take off the exghaust pipe to check part of the cylinder, also i feel like the 4 strokes are a little more unpredictable when it comes to blowing it, ive had a 450 that sounded clean af and all of a sudden seized outta no where

[@moistwienor4572]

Exact same thing just happened to my banshee. A bearing gave out and the piston was slapping around the cylinder head while the skirt was wearing itself to hell. Thang god for nikasil though otherwise I would have needed new cylinders.

[@MotoMuppet]

They're all fun and games!

[@keeganfoster1792]

Yea dirt bike are hard working machines nothing lasts forever people.

[@CannondaleF700]

Nice bike ! Retro as fuck. 1990 beast

[@MotoMuppet]

Thanks man! Close! It's a 1995! =)

[@cskalle1213]

Moto Muppet IT NEEDS A REBUILD BUD xD

[@MotoMuppet]

I think so too!! xD

[@gavinkerber7165]

I had this problem too, with two strokes it's bound to happen sooner or later no matter how well you treat the bike. They're high performance machines with very tight tolerances so can't always be too surprised. Hope you can get her fixed soon, I'd check out motosport and order a wrench rabbit complete rebuild kit. It'll run you upwards of 500 bucks but I've rebuilt three bikes for friends using that kit and they all run perfect now. Worth every penny!

[@MotoMuppet]

This video was posted a while ago now :D The bike had a full engine rebuild =)

[@HomeForGamersFTW]

Words to live by

[@brianj123458]

The bike did not seem like it was running right at all before it blew up it already had problems it almost sounded like an air leak to me

[@MotoMuppet]

That was the point in the video, I edited the video to start right as the problems became clear to see in the video =) I don't have this bike anymore but the guy that now has it still can't stop it from blowing up, there is something seriously wrong with this bike haha

[@brianj123458]

@@MotoMuppet has your friend that has the bike now done a leak down test? If not have him do that to me it seems like it has a really bad air leak which will cause it to blow up even if you rebuild it if the leak dont get fixed it will keep blowing. Just my opinion hope it helps

[@mstzmikebsteviec1119]

it's hard to give a video like this a thumbs-up I feel your pain there is nothing thumbs up about this but it was a good experience for people who are an experienced Riders to see and be able to take in in a little bit of that knowledge

[@jxdro1446]

how do you blow a bike up? I'm new to riding so i don't understand

[@moviebod]

sounds like a piston ring gone. Having watched to the end it was other stuff too. Sorry to hear that.

[@lewisevans3451]

Could be the gudgeon pin in the piston rattling round it’s usual

[@danieldemayo6209]

That sounds phenomenal lol

[@paradiseroad6405]

...engine braking is the engine pulling a vacuum against the closed throttle plate...there's no load on anything...

[@cr-fc5rb]

That motor was running rough from the beginning!

[@MotoMuppet]

It cut the video to where the problems started

[@aldenthompson6912]

one of those videos "kid blows up 2 stroke, (911 called)"

[@thepyrodude]

Sounded like it was knocking pretty hard at the start so yeah just keep riding it lol

[@MotoMuppet]

Indeed, it got a complete engine rebuild after. I put in the time and money.

[@EddiNice]

Where do you guys ride, any up in Cambridge?

[@MotoMuppet]

Salisbury plains usually mate =)

[@landenhustler9716]

That’s some piston slap

[@ollie6512]

He's not called Moto Muppet for no reason 🤦‍♂️🤦‍♂️🤦‍♂️

[@evandunnell5069]

My bike sounds like this only just bought it has a hole in the bottom of engine aswell also had very little petrol and previous owner ran it without 2 stroke any ideas ?

[@intotheadventure2592]

Buy a new engine

[@andreww.883]

What bike is he on ?

[@easylee1417]

Granny shiftin not double clutching like your supposed too Jk

[@PapaWheelie1]

Respct- dis man knos wht up.

[@eddean5090]

30 years 2-stroke mechanic and engine braking is natural for the engine whoever says the engine braking is bad for a 2-stroke obviously only owned one or two and has no idea

[@MotoMuppet]

Appreciate the information =)

[@eddean5090]

Moto Muppet / if you want to become an expert with two strokes best thing to do is to 1: learn how to read the spark plug: 2:Second thing you need to learn when there's a noise coming from the bottom engine obviously has to come apart/ learn how to read the piston if you go on the Internet you will find plenty of information about learning to "reading a 2-stroke piston" best information I can never give anyone: Reading a piston will tell you whether it's the way you ride or the way the bike has being set up or basic mechanical fault.

[@muddyboots3250]

Ed Dean I was scrolling through the comments looking for this. Thanks 👍

[@eddean5090]

Moto Muppet www.smellofdeath.com/lloydy/piston_diag_guide.htm

[@zombiedeutsch]

good read, but i disagree, engine brake does some harm, specially in 2 stroke racing engines. for mopeds and low rpm stock 2 strokes it's okkay, but does harm if prolonged

[@TS125XvsRX50]

Damn i though TS125X are indestructible lol. Owned one by myself very reliable machine. Would be great if you would do rebuild and make video! :)

[@MotoMuppet]

This is an old video mate, the bike has been fully rebuilt since then :D

[@TS125XvsRX50]

Just looked through your videos, sorry :D I saw 2 rebuilds, well done! keep up the good work :)

[@MotoMuppet]

Thank you =)

[@polishsharpshooter2876]

That sucks. Did you get it back on the trail?

[@MotoMuppet]

We were already heading back to the van, this was the end of the day of riding. I got towed about a mile back to the van =)

[@joshguitar7206]

At least u can say that she went out with a bang

[@MotoMuppet]

Yeah haha

[@iKenFlyPPG]

"Rev it up, that will fix it."

[@dennisyoung4631]

That *Noise!* Piston slap? A bearing? Something sounds like it’s going to come out the side of the engine!

[@subrider4390]

What was broken? My bike sounds the same yesterday and i don't know what is broken

[@MotoMuppet]

It is all listen at the end of the video =)

[@MASincorporated]

That bike looks so fun to ride!

[@MotoMuppet]

It is when it isn't giving me problems haha

[@wouldyouglowme4235]

Nothing else like a dude breathing super loud

[@sihx8932]

Bru why you keep engine braking tho

[@ethanelliott2388]

How often do you wash your bike? It's really bad for it to not get cleaned after every ride😮

[@ethanelliott2388]

As the mud builds up around the engine only causing more weight and rust

[@MotoMuppet]

My bike gets cleaned after every time I go offroading =)

[@dooleydooley4742]

A 2 stroke engine made out of aluminum, rusting..... Interesting.

[@Rasty_cze]

Ethan Elliott Why? If its not in air filter or fuel tank it doesnt matter. Cross bikes looks better if its dirty by mud.

[@ethanelliott2388]

Life_sober chill out bro it's always better to have a clean bike then dirty bike right? So shut your mouth😉☺️

[@slightlymicrowavedsoggysoc6751]

Is that a 125 with a 250 pipe? He looks down at the cylinder it says 124, look at the pipe and it looks like a 250 pipe with that extra curve? I am confusion!

[@MotoMuppet]

No it's just the standard pipe for the Ts125r =)

[@slightlymicrowavedsoggysoc6751]

@@MotoMuppet Ooooooh, i’ve watched this video a handfull of times and wondered and wondered? Thank’s😃

[@gigigigio4767]

Where did u go to film??

[@MotoMuppet]

Salisbury plains

[@aljosagajst8725]

my aprilia rs50 with 80cc kit was making the same noise as yours before it fucked up piston and the cylinder

[@MotoMuppet]

I'm lucky, I had no cylinder damage =)

[@ryanoliver7057]

The same thing happened on my bike

[@joski9030]

If I heard a noise like that on mine it be turned off right away and I’d be getting a lift home or getting towed by one of my mates this is painful to watch. Keeps revving it like that will fix it 🤦🏼‍♂️ Just realised muppet was in the name !

[@MotoMuppet]

I kept riding it until it died, then put in the time and money to rebuild it from the ground up. I may hammer it, but it gets the attention needed.

[@joski9030]

Moto Muppet Is it fixed?

[@ckvideoridingadventures1053]

Should this how 2 strokes should sound?

[@chipper442]

Never understood why people just keep on riding, and revving the piss out of an engine they obviously know isn't doing so good lol.

[@MotoMuppet]

Because I was miles from our van and was just trying to get as close as possible.

[@stevenvanheel3932]

Lol my 175 3 wheeler has bad big and little end bearings and I have been beating on it for 2 years now and it still hasn’t exploded. It rattles like a mofo at idle.

[@MotoMuppet]

xD

[@seanm6311]

When there is no throttle, the engine idles right? It's getting petrol and oil, right? Therefore, when you are doing no throttle down hill or whatever, (I am guessing that's what you call engine braking) , the engine is still getting oil...and petrol. I've never had a problem, with both premix and injection. If you have a problem, maybe the fuel/oil ratio has not enough oil in it, or the injection system isn't injecting enough oil as it should. The injection system on my road bike is adjustable. If you are revving the motor flat out for prolonged periods, you might want to make the petrol/oil ratio a bit richer , with a little bit more oil per litre of petrol.

[@dilloncollins7521]

Sean M no it’s just not getting enough. It’s held at 8-10000 rpms getting gas for it to idle...that’s clearly starved lol

[@seanm6311]

I've never had a problem.

[@dilloncollins7521]

Sean M yet

[@sgtrobuck4987]

Where is this in the uk?

[@MotoMuppet]

Salisbury plains

[@tridel2356]

What bike are u on?

[@MotoMuppet]

Suzuki Ts125R 1995

[@2krisz]

I'm not an engineer or something, but in the beginning of the video that bike already sounded like it had one wheel in the grave already :(

[@MotoMuppet]

This was the end of the day. We had already been riding for about 3-4 hours. But you are correct, that is why I started the video at that point as that is where the problems became noticeable =)

[@gti20vtMarcel]

Engine already sounded not to powerfull from the beginning!, but it's not a RM is it?

[@mikeyforester6221]

I thought that its a Suzuki alright but more like a RMZ or something just like dtr for Yamaha or kmx for the kwakis

[@thebrokemtbrider148]

I AM YOUR 600TH SUB!!!YAY!!!!

[@MotoMuppet]

Thank you mate!

[@FOXqvarna]

did you win the bikes at bingo?

[@MotoMuppet]

You can win motorbikes at Bingo? What Bingo are you going too? I wanna come too.

[@FOXqvarna]

Moto Muppet :D

[@zombiedeutsch]

bearings starving for oil, because of engine braking too much

[@sinsofanubis1053]

zombiedeutsch the oil in the fuel doesn't lubricate the bearings, the gear oil in the case does.

[@zombiedeutsch]

crankshaft bearings too ?

[@sinsofanubis1053]

zombiedeutsch yep, how did you think the mixed fuel got to the crank? It only lubes the rings and other top end stuff

[@zombiedeutsch]

+Jordan Sleppy i ride 2 stroke mopeds and thats how they are lubricated. i thought transmission in 2 stroke dirt bikes and other bikes is separated from engine and has its own lubrication unlike 4 stroke.

[@zombiedeutsch]

Dingus Dow thats right, thanks man. I was correct after all though i never put my hand on a 2 stroke with gears transmission.

[@therealakalaska9485]

good thing your on a 2 stroke. HAlf the price to rebuild than a 4 stroke

[@MotoMuppet]

Yeah haha!

[@mummohacker]

And twice as easy

[@Trailcel]

therealAK ALASKA but a 4 strokes can run forever without rebuild! :p

[@mckontioniemi3950]

Engine braking isnt bad on 4 strokes on 2 strokes it is

[@Skracken]

Wouldn't need to rebuild a 4-stroke

[@emil1206]

2:18 rod knocknig

[@cxbra]

That bike sounded hurt from the beginning! I thought it was an air cooled bike (air cooled bikes always sound less rev-happy than water cooled bikes... like the piston is swollen or something). When I saw your radiator cap I thought (uhh ohhhh). It most likely had extremely low compression, it didnt sound like a happy engine even in the beginning.

[@joshuamaas5380]

Hears something off proceds to throttle the engine

[@RavingBob]

You could have prevented a lot of damage by not running the bike after you started hearing noise. But now your cylinder and head are junk, and if anything gets into the Crankcase your looking at lots of money for repairs...

[@MotoMuppet]

I gave the bike a full rebuild, the cylinder was fine and so was the head =)

[@mikeyforester6221]

lol

[@truthseek3017]

Running LEAN as fuck. Turn the air screw in to the right on the carb to allow more fuel, or increase size of pilot and main jet.

[@sihx8932]

Four strokes are cool too

[@emmettjenner1872]

How do I avoid engine braking?

[@MotoMuppet]

Don't listen to the people saying stop engine braking mate, as long as you aren't doing it down a massive hill or for prolonged periods of time it's completely fine. 90% of the people that complain about engine braking haven't got a clue.

[@DepakoteMeister]

@@MotoMuppet I've been riding two strokes (mainly MX bikes) since the late 70s, and this no engine braking bolloxs was never heard of then. It's a new thing invented by some clown on the internet.

[@charliecharliecharliecharl8554]

My engine sounds like bolts in a washing machine let's carry on

[@dr.hugog.hackenbush9443]

This can also be called "lack of proper maintenance".

[@SootyHunt]

3 old school bikes there :)

[@MotoMuppet]

Indeed! =)

[@lazurus222]

The Honda will blown up soon hanging high after a rev is a lean sign

[@steven-vn9ui]

Don't understand why you kept ragging it after the noise presented mate. Oh well. Hope it all worked out for ya

[@MotoMuppet]

You're one of the very many who don't, I was giving it a full rebuild anyway so meh. Thanks mate

[@brandonjustice7379]

I only ride my 2 stroke for short periods at a time

[@alexcrafter_]

what bike is that?

[@MotoMuppet]

I was riding a Suzuki Ts125R

[@trevcannon]

Love the fact all 3 are road legal.. I got myself a 91 cr125 :D

[@MotoMuppet]

Very nice!!

[@SweetHomeSenders]

Same exact thing happened to me but my piston was in peace's

[@MotoMuppet]

That sucks man =(

[@twindrawers9555]

This is why you should drive a 4 strike

[@MotoMuppet]

Hahaa

[@intotheadventure2592]

No

[@noreaster4194]

4 Strike lmao

[@vetrix2724]

Shuda bought a Yamaha 😂😂😂🤣🔥🔥. IM JOKING CHILL

[@MotoMuppet]

Hahaha, I've brought a Honda

[@RSPYT]

I'd say it was seriously unlucky to have rings, and both bearings go lol.

[@MotoMuppet]

I know man, fuck it sucked xD

[@jacobh7371]

*mint*

[@joewilson1191]

put in a bigger pilot jet and brake away😜🤓

[@waynesmith7813]

Wouldn’t of been so bad if you stopped after you heard first rattle, maybe just rings, lesson learnt I suppose

[@danielle-pine5645]

Keep your oil topped up on your 2 stroke. Keep an oil can with you

[@MotoMuppet]

It is premix =)

[@ianduijsens]

it was already running pretty lean you could hear it cut out and that ratteling is called rodnock lol

[@MotoMuppet]

It is all rebuilt now and running good =)

[@boygirlandadad5814]

Ian Duijsens rod knock on a two stroke? Really? What rod(s)?

[@almostabeast240]

boy girl and a dad the same rod as in any other piston engine...

[@boygirlandadad5814]

almostabeast240 right. After I posted that it struck me and should have deleted it. I have no idea why I didn't think about the connecting rod and was for some reason thinking push rods and was like, *this isn't a four stroke!!!*. Dumb.

[@davidtalisman4422]

It started to break when you said it was the spark plug....

[@MotoMuppet]

It's all rebuilt now and running well if you check out some of my newer videos :D

[@MrGuvEuroman]

I could hear the rattle of death at the start of the Vid, I wouldn't of took it out.

[@MotoMuppet]

We had already been riding for hours, I started the video at that point as that is where the noise started.

[@badtensioner]

Sounds like you just ran out of gas.

[@colemanbinyon7063]

You can’t be serious...

[@valtslp7443]

looks like crank bearings

[@marcostet]

Here come the engine braking comment stream

[@landenhustler9716]

A little long of a spark plug there bud

[@RussellBooth1977]

The yellow bikes look like the Suzuki RM bikes,I rode someones RM125 about 23 years ago back when I was too poor to afford a motorbike, it went well. His dad bought it & rebuilt it because the engine was a bit tired,I rode it before the rebuild. I was around a lot of thar d**k heads whose dad spoilt them rotten,how about seizing a brand new Yamaha YZ125 because they didn't read the instructions & didn't fill the oil tank up on a $6000 plus AUD bike,people in the motocross community thought he was an idiot because he nearly landed on someone after launching his bike over a dirt mound. Oh ! His dad had to pay to have the engine rebuilt out of his own pocket because the warranty doesn't cover that fault which is the owners stupidity. I know someone else rode a YZ100 which went like hell as well,it's surprising how well such a small 2 stroke goes.

[@MotoMuppet]

I know how you feel! I have a friend who is lucky and has everything given to him on a plate haha

[@mrpantur7280]

let the bike cool down then ride it back slowly. Might have saved it.

[@DonovanBryant92]

im going to go junkyard hunting for its new engine

[@MotoMuppet]

Fingers crossed you find a good one!

[@KSI_Revelations]

Engine starts knocking. Processeds to rev the shit out of it and continue riding. You are lucky. Next time shut it off right then and there to be safe. Tow it back out