Rig Welder | Stick Welding Pipe | Tips & Tricks ON SMAW

[@luisalanis6816]

Hey bro I'm interested in one of those clamps ?!

[@TheWeldLab]

email me [e-mail]

[@dwaynedemastus1677]

Same!

[@johnzokousa]

@@TheWeldLab hello bro I am also a boilermaker welder I have a technician's certificate (BT) I must come to the usa soon I already have the visa I come from Africa and I would like to know if once there I can find myself one job either with you or maybe give me advice on how to find a job I have 5 years of experience I have a good command of welding

[@Coday710]

Man you still active? Been wanting to talk to someone close to my age trying get into the field work man just looking for some guidance on what you think I should do you got insta?

[@OpTicMinds]

Not even a welder, and watched most of your videos. Good content.

[@TheWeldLab]

I appreciate that! thanks for supporting

[@welderapprentice5074]

Man I like it when welders show off the weld, gives me something to compare to with mine lol

[@TheWeldLab]

😂

[@elmichoacano8001]

Chalino Sanchez in your mask nice 😎😎😎😎👍👍👍👍👍 💯 💯

[@ghrobbs]

25yr + welder, your welds are very slick my friend. Keep up the great work. Ps...Love how your videos are helping to teach the young pups.

[@thelazywelder1645]

Love your videos!! Let’s see some more tight spot welding... especially with that 6010 and 7018s

[@TheWeldLab]

For sure!!

[@robertblackshear8963]

Man forget them haters. I dealt with a lot of them at the shipyard I used to work. You can weld your ass off based on what I have seen. Run that thang bro. Good video.

[@williamarnett1968]

Bro you straight up a good hand. Nice looking welds brother

[@peterdzion5055]

Hey I love the channel. Your welds are on point I used to weld I the shipyards in Michigan. I was a mig flux welder and your stick weld game is strong man. Love it. Keep it up. I love the cheap welder tests I'm trying to do some fab work and I need a cheap stick welder so I look for videos like yours. I have never had one so you are helping me out alot. Thank you.

[@lovejcdc]

Shoot man those are some fine looking welds. Especially considering the place and position.

[@TheWeldLab]

haha thanks

[@levi5548]

Haters gonna hate sweet clamp

[@TheWeldLab]

them damn internet QCs

[@levi5548]

@@TheWeldLab hahaha I'm sure you'll get it figured out soon

[@freddyrasheed528]

HEY, YOU MADE IT HAPPEN . SLICK CAPPING 😎

[@TheRitchieLeeShow]

Forget the haters, show me what you know. Good idea with the chain clamp.

[@TheWeldLab]

💯

[@quinton7854]

i like the info you are giving, im in the military for welding so every little thing helps

[@TheWeldLab]

thanks for watching what do yall weld in the military

[@quinton7854]

@@TheWeldLab little bit of everything, but we mainly focus on stainless

[@TheWeldLab]

That’s what’s up man!

[@coltonstrange1003]

Lost a 10 yr six figure sales career due to Covid. Start my non ferrous cert on 1/21. Huge inspiration Bro. Appreciate the content!

[@TheWeldLab]

You got this!....good luck on you journey

[@joehernandezjr_223]

I love your work I am 16 and I am in welding school right now I stay in Houston area

[@TheWeldLab]

Good luck!

[@WardWeldz]

Don't mention the haters, dont even give them that bro! Get it!

[@GrimThe21]

Nice weld man. Haters only hating cause they haven't learned it's easier said then done. Respect dude

[@shtf411com]

horizontal is 'level, vertical is 'plumb'. Great video!

[@TheWeldLab]

Thanks for the info!

[@Isaacchilling]

At the end of the video I just wanna say thank you for the advice

[@TheWeldLab]

Glad I could help!🙏🏼

[@METALMUNCHERS77]

Haters homie they every where they hate us because the ain’t us!😂😂💪💯😉. Using every thing for a chipping hammer a square and socket joint for hammer love it real life !

[@TheWeldLab]

lmfao we never have the rite tools when we need them lol

[@CesarHuerta-ih7oj]

9.04 🤣🤣🤣🤣. THEY BE TALKIN ALL THAT SHIT ON DAT BOI RICO BT HES STILL OUT THERE GETTING THE JOBS WE WISH WE HAD.🤘 BETTER GET THOSE PATTEN NUMBERS ON THOSE CLAMPS. TRADEMARK THAT PRODUCT.

[@TheWeldLab]

dman haters lol ...i will do that!

[@bedstain5045]

Awesome content

[@TheWeldLab]

💯

[@TheJsote1988]

Weld outside Came out Clean, With That Clamp 💯💯... inside Stainless root & Cap came out flawless Myboy. 👌

[@TheWeldLab]

Appreciate that💯

[@alanwelds9197]

My favorite KZbin welder 👨🏽‍🏭

[@rashadjackson4473]

Love your videos bro my favorite weld tuber💯 your videos motivate me to become a better welder

[@TheWeldLab]

Thanks for watching !

[@gustavorodriguez-wq8dg]

Love these videos start school Tuesday next week

[@TheWeldLab]

Good luck!! happy to hear that

[@gustavorodriguez-wq8dg]

@@TheWeldLab thanks keep them great videos coming bro

[@gustavorodriguez-wq8dg]

@@TheWeldLab hey can you do a vertical up weld tutorial ?

[@williamgrace3774]

If u set up two mirrors it makes it a lot easier Lov the clamp

[@codywallace6948]

Hey man one thing rig welders should keep in there truck is a starched welding shirt for any wrecks like getting burnt up or if the one they got on reps

[@TheWeldLab]

i usetoo do that all the time i need to go back to it

[@rugontv6164]

Very nice my friend ❤️❤️❤️.. I like that kind of job!! Good job 👍👍👍.take care always my friend!!!

[@TheWeldLab]

Thank you!

[@JoseJimenez-kt1rv]

Man bro I’m Proud of your channel went ever I subscribe to your channel you only had about 1000 something subscribers and now you have close to 15k 👍🏻 👍🏻👍🏻👍🏻👍🏻👍🏻👏👏👏🥳💵💵

[@TheWeldLab]

ok we got a day one subs still outchea!

[@chrispersaud3055]

Great job for a young welder bro

[@nickbrink4114]

Im a welder and your welds look good man !! 😀nice job

[@ft86]

Clean

[@astonish473]

This man to cold bruh

[@TheWeldLab]

ready to go back south!

[@ShadowMaster_6]

A video on what to take with you when going out of town for work for the first time im asking because im one of those persons who are just stuck on that I didn't know what to do or take when I heard there was work out of Houston it would be amazing and helpful if you make a video on stuff about that because I was looking at other videos and I couldn't get a straight answer

[@TheWeldLab]

i was actually suppose to shoot that one last week...def try to do that asap

[@indreklensment8374]

In here we run generator + 1phase inverter. Whenever have power from outlet generator doesn't need to run. First time ever seeing that pancake mask, looks cool. I'm running esab sentinel A50 myself. As from today You got new subscriber. Rly good content.

[@rolandkiser7488]

Nice hammer

[@TheWeldLab]

haha hammer is never there when you need it lol

[@user-qv9dw1kq3q]

I seen a fight in a workshop a few years ago , started over a lad using a square as a chipping hammer!

[@TheWeldLab]

haha yeah man some guy have a bad temper...i got into it pretty bad a few times guys trying to take the welding machine or leads i ben using lol

[@cadesimmons9222]

😂 I was wondering if anyone was going to say something about that

[@Subway1427]

Some people would even cut a hole through the wall cladding. When it co es to x-rays, most of the time your job is on the line. Go from hero to zero in 3 welds

[@josephkennedy5653]

Watz good watz good. I dont have rig yet. But I do the travel welding fa sure. Trying to get on to your level my g✊🏾

[@TheWeldLab]

You can do it!

[@southernman7000]

Nice work big dawg!!!

[@TheWeldLab]

💯

[@knightowl8243]

good weld man! no safety jobs....good times. nice clamp too, could use that

[@TheWeldLab]

You got that right!

[@justinothing]

Estan conmadres tus videos camarada grasias por compartir lo que.save

[@alfredobanda2298]

From Htown bro I like ur vids, I’m going to school rn for welding 💪🏼💪🏼

[@TheWeldLab]

🤟🏼

[@Mlgradar713]

Once you get the basics down. Buy your own machine if possible! You only get so much practice in school. Its not enough time. I know a guy in Houston that sells good reliable machines.

[@tomasalvarado207]

Looking good bro keep up the good work stay safe out there 👍👍👍👍

[@TheWeldLab]

thanks man!

[@ssampson572]

Hell yeah brother looks good from here..

[@TheWeldLab]

Appreciate it💯

[@stefanking303]

I think I'm probably the best pipe welder in the world but paid the least🤣🤣🤣🤣👍👊great videos to mate.

[@TheWeldLab]

haha we all ben there youll get that big money soon

[@stefanking303]

@@TheWeldLab haha thanks for reply mate.

[@willie329esparza2]

Keep on pushing young man 👨 💪 🙌 God bless 🙏 🙌 ❤ #Saludos des de Houston, TX #Covid_Season_2021

[@TheWeldLab]

saludos!🤟🏼

[@romanboy2011]

When you were doing your cap, you did the first pass on the top edge not the bottom edge. I haven't welded pipe at my school yet, but is that the proper way to do it, because I know that the puddle likes to sag. To make up for pass in overhead or horizontal test plate, I tend to do the bottom pass first so that the top pass can lay real nice against that previous pass. Any tips would be great, I'm going back to school in march and we will be going straight into TIG, MIG, and Stick pipe welding. FWI, your welds look awesome, forget the jealous haters.

[@JoseJimenez-kt1rv]

You can’t please everyone bro let them hate they don’t feed you or your family so let them hate 👍🏻😎

[@TheWeldLab]

thats right brother!

[@ajsironworks3937]

No hate here bro good work!

[@TheWeldLab]

thanks 🤟🏼

[@boliztik6203]

Hell yeah keep it up man you are doing great welds look really good

[@TheWeldLab]

Thanks 👍brother!

[@scrapnel1687]

That looks real good their is nothing wrong with that weld especially in the position you welded it in. Good job bro

[@TheWeldLab]

thanks man!

[@antoniomurillo4186]

Great Video! Could you make a video on How you land your Rig jobs. do you need a business entity when you do bids or hire on for a job?

[@danielchambers1958]

Good job Sir

[@jimmiemoore640]

I really appreciate your videos man looking into getting one of your tungsten holders I mostly tig stainless pipe this is my first year in the field and have learned alot from your videos!!

[@hunterevans8777]

Badass video man👍

[@dantexas1872]

Sup bro let them haters hate as long as they keep watching u good! Lol Saludos carnal!😎

[@rjesposito2012]

Ayyy. Tell hobbs strawberry says what up. He was my Forman

[@TheWeldLab]

who? i think you got him confused

[@rjesposito2012]

At 1:43 the guy in the back with jacket on.

[@omarramirez4817]

Hay bro like video's, keep up good work. Don't let haters get to you. It take a man with Balls to put themselves out there. 👍

[@TheWeldLab]

Hahah thanks man

[@stillirise505]

Hahahaha.."Haters talking reckless " 🤣💀💀good 1 bro!! Nice work 💥

[@chrisv.6951]

Good job, growing good!

[@TheWeldLab]

Thanks! 😃

[@956DTech]

Love the videos man keep it up, and the haters talking reckless that I can't weld 🤣

[@TheWeldLab]

thats those internet QC lol

[@jerryserrano5062]

You have awesome videos,brother

[@TheWeldLab]

Thank you so much 👍

[@Adri_57]

I haven’t tuned in a few minute but good thing I did!! Good video homie !!

[@TheWeldLab]

thanks!

[@chrismata2217]

when it’s so cold you start stuttering 😂😂 10:58 Do some more tig videos walking the cup

[@TheWeldLab]

haha ..i can def do that

[@mlwest8975]

Hell yeah man I love weld like those. Got keep a lil challenge once in while. And for your welds nice job man. Do the best you can in a spot like that. And tig would be the way to go. But ain’t nobody got time to knife edge the paint off and set up argon hoses haha. 6010 and get it done. Nice video man.

[@TheWeldLab]

yeah man i love running 6010 with my sa200 it burns really good..and yeah sometimes its a hassle with tig

[@Omar_Hakeem]

I like this content on the field, cheers

[@TheWeldLab]

Thanks for the feedback brother

[@gridiron5237]

Say my guy, when u get bac 2 H-TOWN, we gotta link up💯👍🏻💯👍🏻..✌🤘

[@TheWeldLab]

hope to be back there very soon

[@felipelecona6862]

Nice video bro, I’m in welding school right now and I wanna know how it will be to be welder, like a day in the life a welder or what you do on the job

[@TheWeldLab]

cool ill be posting more!

[@TheDragonfriday]

Same here, soon finishing this summer.

[@JHABrand]

Badass video bro keep up the great work🤙🏼🤙🏼

[@TheWeldLab]

Appreciate it!!

[@forfree2367]

S/o from LA! I see the grind bro, keep it up

[@TheWeldLab]

Already!

[@p1nche173]

subbed just because of the chalino sticker.

[@TheWeldLab]

🔥🔥🔥

[@darcymcnabb9259]

You should of put up a fire blanket to protect the cladding.

[@JJ-dz2ne]

Sick welds bro keep it up!

[@TheWeldLab]

Appreciate it!!

[@Gulf_Margin]

Bro yo welds crazy im trynna get like you

[@AndresLopez-km9cr]

Its that chalino sticker in your mask??? Very nice videos by the way 👌👍

[@SuperCadillac08]

Lol haters going to hate bro.. keep up the good work.

[@TheWeldLab]

💯

[@shawnw7401]

Fuck the haters your doing your thing brother keep up the work . Happy New Year god bless 💪

[@TheWeldLab]

That’s rite ! Lol

[@gridiron5237]

BROTHERS OF AH WELDER: STICK 2-GETHER

[@TheWeldLab]

yessir

[@VirtualRonnie]

i would like to see daily uploads man.

[@TheWeldLab]

im on it!

[@z1lla4]

Keep in eye out on the stocks man nio is looking pretty good

[@jcarrillo659]

Rico, the man!

[@TheWeldLab]

🔥💯

[@thelazywelder1645]

S/O Pomona CA!!!

[@Nick_papagiorgio_]

I’d get them to build a scaffold / take a part of the cladding off .. In my experience they don’t like adding extra welds if they don’t have to

[@welderdrew98]

Loving the content man! Keep up the grind 👍🏻

[@TheWeldLab]

Already!

[@israelrangel6808]

Awesome work I fw it bro 🔥 , you should sell welding helmets on your website !!

[@nathalycarney4015]

Love the videos!!!! Let’s Goooooooooo

[@TheWeldLab]

thanks!

[@lazarobravo662]

Saludos BRO desde Orland CA 👌💯💯

[@TheWeldLab]

saludos 🤟🏼

[@azuye766]

Great video man keep it up!

[@TheWeldLab]

Appreciate it!

[@joepalomar105]

Haters are just motivators

[@lilleal5414]

I want to become a rig pipe welder and your videos motivate me bro, I am from Houston and did you need to go to college to become a rig pipe welder?

[@TheWeldLab]

no you dont

[@boiidbii9352]

Badass 🔥🔥🔥👊🏼👊🏼

[@TheCummins1212]

I always forget something when I get stuck in a tight spot or an elevated work space. I felt your pain when you tried to yell at that guy and he didn’t hear you. How it normally goes for me too.

[@TheWeldLab]

Especially when you working on a high scaffold during the summer

[@TheCummins1212]

@@TheWeldLab Every damn time, or I’ll get off in a pressure vessel and have to sit by the man way waiting on someone to walk by to hook up my ground.

[@is.joseee6101]

Can u do a video on inside corner with 6010 5/32 I’m struggling with rod placement and angle

[@TheWeldLab]

got you !

[@is.joseee6101]

@@TheWeldLab if you can do a overhead too that would help love the videos

[@tx.herreraaa]

At least your welds are better than mine:))

[@sanchezy6732]

Thanks for the knowledge 💪🏼 love bro, from Iowa

[@TheWeldLab]

Thanks for the feedback

[@martinalvarez996]

Damn bro that's clean ass welds

[@TheWeldLab]

thanks man!

[@Ypengravings]

Let the haters talk you getting paid 🤷🏻‍♂️

[@TheWeldLab]

yessir 😎