Mercedes Reset Adblue Eng. Start Not Possible P13E500 P140300 P152100 P13F600 Via Autel Diagnostic

here we reset the adblue system that was preventing the vehicle from starting on this Mercedes CLS Diesel. it is likely we may have to return to fit a nox sensor and battery.

[@wastingtechvol2]

I find your videos very helpful and informative. Keep up the good work my friend

[@lawrencebolt3540]

Hello, I own a c class 2015, the adblue finished and it told me engine start not possible. I've got a mechanic around and he did exactly what you did with the diagnostics, but still no luck :(. My adblue is full, can you please advise me as to why you think my car refuses to start? *additional note* I I topped up 4 litres of adblue when there was 20miles left on the adblue clock, but it continued to tick down. Any advice? Kind regards,

[@ORileysAutos]

Are you sure he done adaption procedure correctly? What is your location

[@jackislam9144]

yes you need someone to come with a xentry diagnostic machine, ideally a Mercedes specialist or contact rac they have a merc specialist and you need to update software, next time don't wait to let it go to 0 before topping up

[@davidharvey5461]

Excellent

[@ORileysAutos]

Thanks

[@dtcov]

Hi where are you based ? I have that exact same problem in 400 miles to look forward to !

[@ORileysAutos]

Biggleswade Bedfordshire

[@pairushbubumrungjitr8036]

Method check BENZ E220d fault Engine start not possible limit 800 km.

[@pgachapman]

Hi there, I have a 2015 Mercedes E220 bluetec. it gave me a code today "P229F62 Nox sensor 2 cylinder bank 1 malfunction, signal comparison is faulty". car drives fine. any ideas where i can start to fix this thanks.

[@cryptomh2014]

Hi, did you find the fault for this code?

[@pgachapman]

@@cryptomh2014 hi. Yes I did. Took the car to mercedes and they updated the diesel software and replaced both nox sensors for free under warrenty. Otherwise i would of had to pay £1400. Its a fault of the diesel software which causes the nox sensors to fail apparently.

[@cryptomh2014]

@Peter Chapman I have a 2016 cls, I changed the sensor but still getting the error thinking mercedes would not hange as its old :(. Would a software update fix the error?

[@pgachapman]

@@cryptomh2014 the nox sensors have to be genuine mercedes parts as they need coded to the car. And the only way to successfully code them is to have the correct and most up to date software installed. Im not a mechanic but im told if you fit non genuine they wont last very long.

[@cryptomh2014]

@Peter Chapman i managed to get a genuine one from Germany, possibly refurbished. I can try the software update I guess or possible a mercedes specialist who may be able to code it.

[@chrisfen6831]

Did any of the faults come back after ? As I’m having the same issues now :( but can’t access the adblue settings via my snap on any help would be great

[@ORileysAutos]

This is a temporary fix. After 50-100 miles the fault will return. It's normally fixed by replacing the Nox sensor

[@Ali-wm3kt]

where are you located

[@ORileysAutos]

Bedfordshire

[@Ali-wm3kt]

@@ORileysAutos no chance of coming to burnley then?

[@JerryChanD]

A friend of mine have a E class with my otofix D1 OBD tester shows it has a code P208C11 as short circuit for the ADBlue pump but I didn't see any of wear cabling or fuse blown in the boot, I also change the adblue metering pump with the same exact part number, reattach battery, relearn everything I got in the OTOFix, but in my Otofix D1 the option to let me relearn the Adblue pump are not working. Anyone advise will be greatly appreciated.

[@UllrichVaughan]

I require assistance i did the exact same resets and my engine start not possible still resides. How can i clear the esrror

[@bimmer_garage]

And the check engine ist still on 🤷🏻‍♂️

[@tpmbe]

Good video , really this is a good example of the Mercedes computer says no and disables your car...well done Mercedes (Not) ....it puts me off buying the brand again. They shouldn't be allowed to hold you to ransom with fault codes.

[@ORileysAutos]

Not just mercedes. Every brand with adblue does this

[@saleemfouad6072]

Does this fix can fix glc 2020 same problem?

[@aurimasgercas7991]

Hi , done exactly same as you with same autel as yours , addblue fault gone , but🤦, car starts , rpm dont move , and accelerator dont respond at all , any advice please ?

[@jackrussellrambo5547]

Why is most of your work to do with dpf an dpf flushes do u specialize In this or does it just happen to be wat u just seem to get most of the time?

[@ORileysAutos]

Yes I advertise for dpf cleaning so get more of this type if work

[@wamtecmediaofficial1660]

Am in the Clapham area how can I get you to help out and how much will it cost me

[@ORileysAutos]

Sorry for delay. We are in biggleswade

[@klapbackproduction2428]

Hi quick questions, how do u move from the fault code page to the teacher in menu?

[@jimquigley2028]

Thread damage on nox sensor

[@emmanuelankamah-o6w]

please is there any email i can contact you with

[@ORileysAutos]

[e-mail]

[@neilhampson2843]

10000 miles over due for service, the guy should be ashamed of himself. Well done on getting it running.

[@ORileysAutos]

Thanks for watching

[@pairushbubumrungjitr8036]

AdBlue Fully but show level low

[@s1tuningsheffield62]

He m8 would this procedure work on a vauxhall combo too as it's not starting

[@ORileysAutos]

Is it disabled for Adblue faults?

[@s1tuningsheffield62]

@@ORileysAutos the guy let it eun out and now it will not start

[@feydanmedia]

I have the same issue, will you be able to look at it for me?

[@ORileysAutos]

What location?

[@dgkalisa2130]

@@ORileysAutos do you have any contacts in Glasgow who can reset mine? Up here on a job from london and I got 200miles left

[@kevinpalmer7452]

It’s a life saver that little Autel scanner

[@ORileysAutos]

Great tool

[@aymenmohamed1134]

👍🏻👍🏻👍🏻👍🏻👍🏻🌷

[@michaelhuxley60]

Hi, how do you get the Autel to enter the teach in process? I have a warning on my CLS that it will not start in 400 miles time. I have refilled the adblue tank. Thank you

[@ORileysAutos]

It's in the special functions menu

[@michaelhuxley60]

@@ORileysAutos Thank you

[@samk4096]

@@ORileysAutos where is that menu

[@Webs539]

I have the same fault where are you based can you fix it for me

[@ORileysAutos]

Biggleswade, Bedfordshire

[@Webs539]

I'm in Manchester thanks for the reply

[@globalpilot76]

Which Autel ODB tool are you using?

[@ORileysAutos]

DS808

[@globalpilot76]

@@ORileysAutos Thank you

[@125sm3]

Great diagnostics,

[@ORileysAutos]

Thanks

[@sara78130]

Thanks 😊

[@ORileysAutos]

Thank you 👍🏻

[@sheriffbufordtjustice5492]

Another top job 👍🏻

[@ORileysAutos]

Thank you

[@easybeasy2799]

No more Mercedes

[@ORileysAutos]

Unfortunately this setup is now on most vehicles