Whats A Cheap Scan Tool For DPF Regen & Adaptions Reset? Launch Creader Professional CRP129 EVO

Buy One At www.launchtech.co.uk
further description also available on the Launch UK website.
Genuine UK tool so no overseas imports

[@del1234blue]

Retired mechanic, 10 years now, bought this for my Peugeot partner. How different from what I used 10 years ago. So easy to use, sorted out my adblue problems, after reading fault codes. Best bit of kit I have bought over the last few years. The Internet connection really helps. Could really do with a loader speaker, but I am partially deaf. 😂 Great bit of kit.

[@ORileysAutos]

Thanks for sharing

[@neildean7515]

Jimmy, after watching this video and your live data example, i have just purchased a LAUNCH 2023 Elite CRP129X (best i could afford). After watching you and all the learning from other mechanics this is an interesting next phase in my education. Thanks again for sharing your talents, kind Regards “the amateur accidental mechanic” 👌💪👍🏻

[@martinhinch4818]

Just bought one last week. Had blocked dpf on a 2012 Mercedes b180. Used the live data to help diagnose issues. After cleaning dpf ,went to reset menu, did a 15 minute soot level check, % was 400, now much lower, and not showing soot level fault. Think originally failed to do regen due to failed thermostat. Thanks for your videos on the dpf cleaning.

[@googies12a]

Very helpful video! Having trouble with an S-max, its the resetting/adaptation that is killing me. hopefully this gets me where i need to be, everything else was sorted out, DPF, diff press sensor, 5th injector. Bought this based on the video, hopefully it does my DIY'er jobs. All the best from back on our home turf!

[@ORileysAutos]

This should do the trick 👍🏻

[@marklilley9079]

Pulled the trigger on one of these a few days ago. Great little tool

[@ORileysAutos]

Uk website or amazon?

[@marklilley9079]

Uk website just came back in stock.

[@martynserv9939]

Worth its money on the first use

[@ORileysAutos]

Yes 👍🏻

[@automend8502]

Nice one Jimmy looking out for us with less cash to spend

[@ORileysAutos]

No problem

[@beany1987]

Personally I think the resets and replacement parts should be in the same place in 1 area, had my dpf cleaned but couldn't find how to tell the system it had been replaced eventually found it in resets.

[@markmrx]

I'm looking for a tool to do this now on my e250. Dpf collapsed and got a second hand one professionally cleaned but the % is stuck at 165. I'm surprised my icarsof can't do it.

[@neildean7515]

Jimmy, thanks thats very useful. I will consider that as a purchase. Your videos are great and i have learnt so much.. kind regards. After a DPF regen is it recommended to have an oil change… A friend told me this but couldnt answer why this is so, is this correct?

[@ORileysAutos]

Yes oil change is recommended as it gets diluted with diesel during a regen

[@vikashdutt124]

Thank you for sharing this video. Do you happen to have a video on injector coding?

[@frv6610]

Can I inject some fluid through the oxygen sensor's opening to facilitate the cleaning with forced regeneration, can it be GAT DPF cleaning fluid or maybe even 1 litre of brake cleaner fluid? I already poured DPF additive to the tank and sprayed DPF cleaner in through the oxygen sensor opening but I wonder if I can pour liquid for the forced regeneration? Can I do it with MA PROFESSIONAL - DPF Filter Cleaner 5L?

[@ORileysAutos]

Putting fluid in during a regeneration will lower the dpf temperature and cause the regen to fail

[@MattScales]

Great video, any idea what the difference is between this model the CRP129 EVO and the CRP129 X PRO+ ? There are so many different versions out there, just need one to do a DPF Regen and battery reset?!?!

[@CriftinsCampers]

A good test would be to know if it can work effectively in diagnosing and display data for the older 2.5 VW crafter as that a right Jekyll and Hyde. Also interested to know if any of these universal tools are up to speed with EVs especially some of the more complicated brake bleeding routines.

[@ORileysAutos]

Even my expensive unit struggles to get any info from them

[@CriftinsCampers]

@@ORileysAutos I bought VCDS but even that’s limited and I find it a very awkward tool to use. It can’t even activate cruise control for the 2E crafter variants . However the Kufatec dongle enabled it it in seconds! It is a shame we have to cart about so many different tools isn’t it When MG Rover went bust I was one of the few people that had their own T4 system!

[@codenameFourtySeven]

Great Video mate.

[@paulcollins8296]

Great video. In another of your videos you used a different diagnostic tool to tell a Range Rover Sport that its failed DPF had been replaced. Would a Launch 129 EVO be able to tell a vehicle that the DPF had been replaced ? i.e. could you have made that same Range Rover video using the Launch 129 EVO ?

[@ORileysAutos]

Yes I'm sure it could. I'll try to use it on a video

[@carpingkevlar]

Hi Jimmy After watching lots of your videos & having my pants pulled down quite a few times for diagnostics, i would like to get one of these for diy. Don't suppose you have a referral or discount code before i go ahead & purchase one from lauch. Thanks & keep up the great work 👍

[@ORileysAutos]

Unfortunately no discount code. www.launchtech.co.uk

[@MarkCollins-j4b]

Will be interesting to see if it works on Citroens? Especially for DPF stuff.

[@bodudek]

Got issues on DPF info for Citroens?

[@bodudek]

@@baracuda40 No idea. Ended up buying a more expensive Launch x431 Euro Turbo

[@clayisland]

Great video. I'm trying to get this to work on my 206 2015 sprinter 2.1L. Tried sitting still and driving and it won't do it. Gave ignition circuit message driving, and no clue why it won't do it when still as the parameters seem to be met...

[@clayisland]

I drove on the highway for about 40 miles trying to get it to start and it wouldn't. As soon as I pulled into the driveway I tried the standstill method and it started doing the dpf regeneration. So yes, it works, more detailed instructions and messages would be helpful.

[@philtowle4683]

Watch out I bought a launch product from uk launch on ebay which is nothing to do with launch uk. I have had a quick response from uk launch though regarding an issue.

[@toolman95]

Here's an interesting case, merc w204 elec stability control problem. Launch says RH Front wheel Sensor issue, but all wheels are reading wheel motion?

[@WhatsUrEp]

Any idea if it supports Renault, specifically renault traffic

[@mzwandilethandanani1015]

Does it reset car keys if need resetting

[@trorth5626]

Is it well connected with mazda cx5 2.2 diesel 2015? For dpf regen especially

[@jesperchristensen3491]

Hi Jimmy, I live in the north part of Denmark and do mostly Peugeot/Citroen. What obd tool will you recomend? I need it for resetting and read values in dpf and eolys + the normale stuff. Regards Jesper

[@HOGWORLD39]

Been looking at this, unless I'm wrong, will only work on Pre Secure gateway vehicles up to 2017/2018, bit of a concern.

[@johnmccarthy3438]

Great videos jimmy does the very informative does the launch crp919x bt suit light commercial vans eg transit custom ,Mercedes sprinter

[@chrisnewell-7758]

I need to know this too, does it work?

[@ambientsounds1416]

It seems all of these diags like Thinkdiag and Launch all have the same rouletter VIN, Menus, buttons and so on. Whoever wrote this program must have made an absolute fortune as it's used by every diag company.

[@philtowle4683]

It's really tacky. The units already look like an amazon fire kids before the stupid gimmicks.

[@lukecarter1978]

I’ve just got this for my 2013 Vauxhall insignia 2.0 cdti. When about to start a regen on the DPF it mentions removing floor carpet etc as the temp goes up to 600c, is this necessary???

[@daisythecamperb9883]

Hi Jimmy I'm after a reset scanner to fully reset dpf on Renault traffic as it shows permanent after my flush . Does this do this ? Thanks Paul

[@mjy4870]

Hello Jimmy , i have a 2011 Citroen C4 Grand Picasso 1.6 HDI, just had the Service light come on also DPF additive to tank low. Can this scanner also reset the ECU for this condition ( after i have topped up the additive tank ) Thanks for the very good video on the scanner - Malcolm

[@ORileysAutos]

Yes I done a peugeot expert today

[@RobertSmith-qs8yl]

Malcolm, did this tool do the reset for topping up the additive tank as I have done like you and need a tool to reset the ECU. if so how did you do it using the tool thanks.

[@afella29]

Can edit the pat fluid level with it?

[@KipKippax]

You do some very good educational videos thankyou . I need to code/adapt a new DPF Pressure sensor on my 2011 Seat Ibiza 2.0tdi . Am I right in thinking this tool will do this instead of having to use VCDS? Thanks in advance.. Ron

[@ORileysAutos]

Yes it should definitely do that

[@KipKippax]

@@ORileysAutos thanks for your rapid reply .

[@AvonThring]

Hi. Can this scanner scan my 2019 isuzu dmax

[@kibonge61]

Hi more good helpful info will this work for particulate filter regen on nissan xtrail 2009?cheers

[@ORileysAutos]

It should

[@garybriers690]

Iv'e had a launch for 2 years now, when I bought it they were a cheap chinese Autel, now they are owned by Autel, basically this is an Autel

[@ORileysAutos]

I don't think they are owned by Autel. Completely different machines

[@OsuperfastjellyfishO]

Launch pisses on autel for the most part

[@jamesthorn3336]

Would this do an adaptation to a Merc sprinter to tell it it’s had a new turbo?

[@neildean7515]

Jimmy, after a few goes with my new Launch 129x, I have a simple question. Where is the best place to get my vehicles live data parameters. I have a opel zafira 1.7cdti 2014. I was hoping there would be an extra column showing NORMAL specs, a bit like when you have a medical; Actual 6 (Normal Range 2-10)..thanks for your education..

[@neildean7515]

By the way, Regen on a Opel Zafira 1.7cdti worked on this launch 129x 2023 version. It was at 92% which i thought was high (range is 0-250), not 0-100%. After a Regen and a 30 minute run it showed a saturation of 49%, down from 92%. The tool is very good, but, i cannot seem to find Fuel Trims which i wanted…

[@gazza4230]

I’m hoping to get mine to do a dpf re gen I’ve just been on a 50 mile trip and still haven’t got the light off so hopefully when this tool arrives tomorrow I’ll be able to sort it and clear the poxy warning light if not I got some redex dpf cleaner you add to fuel tank and I’ll run that through it but I wanted to ask putting that stuff in diesel tank is it any good for doing it like I say I’ll put the obd on first and go through that precidour before I add that stuff to tank any advice, thanks Gary

[@kawaquackygreen5977]

I've just ordered mine to for this reason, did yours manage to clear your DPF?

[@gazza4230]

@@kawaquackygreen5977no it wouldn’t do it so I purchased the whole Audi thing on mall and still wouldn’t do it but I’m no mechanic I might not be doing it right

[@Chris-jy3dm]

Hi jimmy I’ve had p0101 for MAF sensor, my query is if I unplug the sensor when it’s running will it die like a petrol engine does if it’s bad PS I’ve got exhaust fumes smell in car as well now cheers jimmy

[@TheDajoca]

Is there a budget one that will do reinitialisation of nox / countdown resets?

[@mauriziogiasan4411]

❤

[@ORileysAutos]

👍🏻

[@edwardthompson9981]

What do u get if u buy the full feature for your car?

[@Tattooedredhead]

Will this work on my 2012 Audi a3 tdi

[@malcpaul996]

Is it possible to code diesel injectors on a Kia Rio 2012 UB do you know? Thanks

[@richardcottam441]

Hi it does a dpf regen so can it reset the count if you top up your additive on a Peugoet 3008

[@lgbeats9925]

Hi there, would this work on an Audi A4 Quattro 2016 for DPF regen?

[@cjason7202]

Does the cr123x do the same job ?

[@mondodaftasabrush]

Will this work with Citroen ? Is there such a tool that can power up the AdBlue motor and function test the injector and leaving it hanging out of the manifold so you can see it working or spraying ? C4 Cactus flashed up with Urea fault and poked my head underneath and removed injector and bench tested it ... AdBlue tank full with crystal preventative additive also noticed it had an Elyos tank cover at r/h side front of rear wheel and looking through with an Autec unit it seems to be connected containing 1.14 ltrs fluid within ? Yeah I know ... you would never get these issues with a Toyota !

[@martynserv9939]

Doubt it. Don't even think his tab 3 does it on Citroen. I have seen him do it on a mk8 transit though

[@ORileysAutos]

I don't think it's available on citroen yet to activate the adblue injector

[@mammam6472]

2 tanks ? 1adblue additive and 1 Elyos additive???

[@ORileysAutos]

@@mammam6472 yes there are two tanks on newer citroen and Peugeot

[@carlxjr100]

​@O'Rileys Autos is it possible to reset the eolys counter after filling up, new shape 3008 1.6

[@olgacoupal-bergeron7633]

Does it reset the eolys tank top off ? Thank you

[@ORileysAutos]

Yes I have used it for that

[@olgacoupal-bergeron7633]

@@ORileysAutos thank you very much . I do like your videos .

[@olgacoupal-bergeron7633]

​@ORileysAutos this video is from 11 month ago . Can i ask you if you found a even cheaper eolys reset tool device in 2024 ? Thank you

[@RobertSmith-qs8yl]

@@ORileysAutos can you confirm how need to do a citreon C4 thanks

[@kirillkirvas455]

Jimmy, any chance this CRP129EVO will handle soot mass / DPF pressure adaptation and reset at LR DiscoSport 2020? or this one suits only older models?

[@fromthetoon1602]

Hi Jimmy I have a 325d on 58 done scan and dpf fault is there soot and ash were high I’ve done a regen after pumping some cleaner product in the pipe on the side of the cat and soot came down to 3g but ash is 49.7 and that won’t go down what do you think I should do?

[@ORileysAutos]

Reset the values/adaptions

[@fromthetoon1602]

@@ORileysAutos thanks Jimmy I will try that 👌

[@dadthespanners]

Thanks Jimmy. Are there any subscriptions that need paying to keep it running?

[@ORileysAutos]

Free updates for life I'm sure

[@dadthespanners]

Thanks. I have ordered one from their website.

[@9304br]

Do you have to pay extra, To get the DPF REGEN, Added to the scanner via download upgrade etc.

[@ORileysAutos]

No it's already on it and free updates

[@TheKrblum]

Will this regen a 2016 ram eco diesel

[@JamesOtto-ef8fq]

Cheaper could be any amount. How much?.

[@olgacoupal-bergeron7633]

He say under 300£ and you can google it in shopping they are for sale for public .

[@tomjudge6654]

Did you have to pay extra for the dpf reset function

[@ORileysAutos]

Not on the UK model from www.launchtech.co.uk

[@Lisa_Turner]

GOOD MAN I like it 😀 can you get a discount code?

[@ORileysAutos]

I'll try

[@marierussell7583]

My husband is looking to purchase a Launch CRP919X. Who would you recommend the best place to buy from. Was looking to surprise him for his birthday in August. Thanks

[@ORileysAutos]

I'm sure that model is only available as import from amazon? This model is on www.launchtech.co.uk

[@superseven220]

Will this put the park brake in service mode for pad replacement?

[@ORileysAutos]

Yes

[@careyautorepairs]

❤❤❤❤

[@ORileysAutos]

👍🏻

[@eliaparisi984]

Hello, I have a big problem with my toyota auris 1.4 d4d. Dpf was cleaned and now the diff pressure is 10mbar on idle. But the car keep to regenerate every 60-70km. The mechanics doesnt know how to reset the soot, the command doesnt work and the car keep to regenerate even of the filter is not blocked. Can you help me please?

[@foxxfof6039]

After static regeneration you muss learn ECU that is dpf and diferential pressure sensor new !!

[@pureoffroad]

Looking at buying one of these to keep on the work van, does it allow you into ad blue systems?

[@AndrewSowerby]

That's what I'm wondering too. I'm going through the adblue nightmare at the moment on my Pug and would like a tool that can help me look into that. Obviously, diagbox/lexia can (for about £150), but that's for PSA group cars only and I'd like one that would work with the other brands of diesels I have to look at sometimes too.

[@pureoffroad]

@@AndrewSowerby got one of them they are fantastic takes a while to work the system out but fantastic piece of kit for the price

[@AndrewSowerby]

@@pureoffroad good to hear. Would you have tried it for adblue / scr / nox sensor stuff too? Any good for that?

[@pureoffroad]

@@AndrewSowerby I’ll give it a go on one of the sprinters I know it does dpf regens but haven’t had it plugged into ad blue hey believe it does have the diag function for them

[@AndrewSowerby]

@@pureoffroad thanks, I didn't see it listed as a feature, but Launch seen to be great at adding new stuff to existing tools/software. The CRP909X does list adblue level resetting and nox sensor stored value resetting, so at least that's an option. Another £100-150 on top though 😬

[@Bombastic_Spastic]

Do you have to pay an annual subscription to keep the software? Does it make it completely useless if you dont buy the annual updates?

[@ORileysAutos]

Free updates for life

[@Bombastic_Spastic]

Now you’ve sold me. To the internet I go!

[@38kay]

hi sir is this car reader olso regenerating the mercedes c from 2015 please thankyou

[@ORileysAutos]

Yes it should

[@vioreltanasa988]

How much is it

[@AlexSmith-vh4id]

Bit of me definitely

[@ORileysAutos]

Www.launchtech.co.uk go get it 👍🏻

[@pedrodeleon862]

Hi , that scan tool work 2012 sprinter Mercedes dpf reg? thank you

[@ORileysAutos]

It should

[@oisinquinn8036]

Can you do stuff like city lights coding with this?

[@ORileysAutos]

Not sure

[@corker95]

Hi i cant find a 129 evo only the 129X and 129E. Is the evo listed as the 129X? Thanks

[@ORileysAutos]

This is only available from launch UK at www.launchtech.co.uk

[@corker95]

Thanks alot i think this is the best tool for my needs

[@mhakantekin3894]

Don't pay for such devices, all you need is a cheap elm327 and phone application. You don't want to pay for a device that will charge you $100 a year after 1 year.

[@Reedouk]

DPF regen from an Elm237?

[@AndsonSimbeye]

I am reguest you OBD2 scanner how much each, price order ​@@Reedouk

[@mhakantekin3894]

@@Reedouk Yes, you need PID

[@naimahmed6147]

@@mhakantekin3894can you force regen using the app? I can only see a way to see measurements on mine.

[@naimahmed6147]

I got a decent ELM327 and the pro obd app. Tried forced regen both static and moving, didn’t work because car is in limp mode. Any way to bypass limp mode to start forced regen bro?

[@garethwatts_]

Which launch can give live data with the pressure differential is it just the 6k one

[@ORileysAutos]

At 5:20 we see dpf differential pressure

[@garethwatts_]

@@ORileysAutos could you demonstrate that feature on the cheaper machine please thanks

[@lu-is-lit]

I’m looking to buy the Xtool D8 . Do you know if the D8 can do dpf reset?

[@ORileysAutos]

I don't think so

[@Mic0m4N]

Does this unit also have free lifetime updates for software?

[@ORileysAutos]

Yes

[@bmw12347]

Is the engine running when you perform dpf regen here?

[@CMxPunk]

Of course.

[@oaoiswylde8026]

"Genuine UK tool so no overseas imports" 0:58 Made in China....lol