Ripping on the Modded Begode RS HS!

LIKE and SUBSCRIBE!
Buy your wheel from E-Wheels.com: www.ewheels.com/rollin-dirty
Buy your wheel from e-rides.com: e-rides.com/?ref=rollin_dirty
Add 5% off your e-rides purchase with coupon: rollin_dirty
e-rides did take care of the warranty issue with the pedal that I discussed in this video. Nice job e-rides!
Buy from Amazon:
Inmotion V12 High Torque: amzn.to/3F7DSPv
Inmotion V11: amzn.to/3N0XhmW
Inmotion V8S: amzn.to/3gDTlwi
Inmotion V5 or V5F: amzn.to/3SyTvlU
Inmotion V11 / V12 Honeycomb pedals: amzn.to/3TW2Fu9
Leatt knee and shin guards: amzn.to/3DspXSL
Leatt chest protector: amzn.to/3eWirX3
Leatt impact shorts: amzn.to/3srOjWE
Mechanix Impact gloves (work great with touchscreens): amzn.to/3VX6wZC
Flexmeter D30 wrist protectors (wear over mechanix gloves): amzn.to/3eYLnxs
Fox Racing Elbow protection: amzn.to/3z9gzAQ
Vans SK8 High-Top shoes: amzn.to/3gDLyij
Dainese motorcycle shoes (model: Metropolis D-Wp): amzn.to/3V1qOA8

[@bordapatrol4930]

Was looking at the V12 and RS for my first wheel, glad to see people still riding them

[@rollindirty2666]

They are both a lot of fun. On road, I really like the RS HS. On trail, it's the V12 for pedal clearance. Both incredible.

[@DonovanWert]

Awesome 😎 thanks brother!!🙏

[@rollindirty2666]

You bet!

[@kaetee79]

The forgotten RS! 👍🏼 This wheel packs some power....it handles your weight very well...nice video ride on✌🏽

[@rollindirty2666]

It really surprised me actually... After putting some good time in on the V12 HT and the Sherman Max, I expected it to be weaker feeling... not so and the top end is better than the Max, by a margin.

[@kaetee79]

Yeah I just replaced the battery packs in mine & it still runs like a beast

[@mike_t_007]

@@rollindirty2666 Is the power curve on the RS amplified by the Molicel batteries? I'm really torn between both wheels V12 HT and RS HS(Molicel). After hearing about Begode batteries I was put of to the RS until learning Wheels sells them with Molicels. No longer worried about fires with the new packs. Now just want to hear how they ride from someone who's used both. Does the upgraded RS ride like the V12 HT but with extra speed?

[@christianstevens9804]

I dump speed and roll through slowly(ish) near pedestrians and dogs that are off leash, once I’m past I floor it and leave’em in my dust. Only a greyhound could keep up and even those can’t hit 40 mph! Once they realize they can’t catch me they usually throw in the towel. It seems to piss off their owners (which is kind of my intent) as they are required to be leashed where I usually ride north of Bham.

[@rollindirty2666]

Exactly. I've had a few scenarios where this work because I have open road, but I can't do that in some of the places I encounter dogs due to the surroundings. There are lots of leash laws in this area, that many tend to ignore.

[@mike_t_007]

Just saw this rider dog defense video! Definitely worth checking out kzbin.info/www/bejne/maHKiYprhNV0i7M

[@sharkyclear]

I haven't adopted yet to my Sherman, so I'd say, it's easier to ride the RS19 heheh my RS19 is under repair, but I can already get it this coming week. Though it's not yet final, because the guys just place epoxy on the screw mounts. I ordered a new set of inner shell. Crashed it while doing 75kph. Agree with the CP pads. I got the CP Titan and it's just a pain. Good thing that pads are made to be cut. I'm planning to split it in 3 pieces, and just rid the middle part where the upper part of your legs will touch. I'll cut it so that it will look like these 2pc pads.

[@rollindirty2666]

Yeah. I think the only way to use the CP pads is to cut them as you suggested.

[@bikemike2777]

I love my rs hs. Are you having any temp issues on hot days? Also I highly recommend 3d printing the extended fender works great from keeping debris and moisture off your azz and from slinging up and running down the trolley handle. The big bonus of the extended fender is its a early warning system if it picks up sticks or mulch jams the wheel up

[@rollindirty2666]

I've never ridden it in the heat so I can't offer any feedback there. I really need to invest in a 3d printer. I saw an excellent one that is way out of my price range at CES 2023 this year that uses resin and prints with amazing resolution. Ill see if I can find the file for the fender... need to make covers for my charger Roger charger too.

[@mikemelroy1424]

So far, every time I've had a dog like that I've been able to slow down to a stop. And act friendly towards it like I'm someone they know. But I could be just lucky I guess. My logic is it's something they don't understand or it freaks them out. So I try to give them that chance to sniff it and check it out. Otherwise, I just slow down to a crawl or get off and walk my euc past. Then get back on and continue. I know that might not work for every one. But so far that's what works for me.

[@rollindirty2666]

Good tip. I'll give this a shot.

[@hi--tEk]

I was riding on a really long straight on a msx 100v 1800 w/h doing maybe 20 mph when out of nowhere an angry to see me greyhound just bolts at me and didnt know whether to just stop but i aired on the side of caution and just hammered this poor wheel to get away it was screaming beeps, i hit 43 mph on the app 🙃

[@rollindirty2666]

Wow... I've hit those speeds, but never in an emergency. That will be a new experience for me which I'm sure I'll have.... Thanks for sharing!

[@hi--tEk]

@@rollindirty2666 wouldnt mind if it was a slow sausage dog it had to be the fastest/fittest dog on the planet 😤✌️

[@mike_t_007]

I'm cross shopping the RS19 HS Molicel vs the V12 HT. Which do you prefer for a beginner? Also which is the better wheel?

[@rollindirty2666]

The build quality of the Inmotion V12HT is much better than than of the RS19. They really are two very different wheels however, so I think your use case is probably the determining factor in your decision. If you plan to ride on trails, steep inclines, or where you need pedal clearance, the V12HT will serve you well for that. If you want to ride fast over smooth surfaces, the RS19 is a good pick, but I would recommend that you make sure that the pedals and pads work for you. Mine was terrible when I bought it and is now a different wheel. Remember the V12HT tops out at 37mph if you lighter weight. I'm heavier and I've had the RS HS over 40mph.

[@mike_t_007]

@@rollindirty2666 Thank you so much for the quick response. You have a new Sub!!! Also sorry to ask a million questions. I plan to ride mostly in the street and want to stay the speed of traffic. I may do some trails but that's more like 5-10%. I'm more of a heavier rider at 240ish at the moment lol

[@nazzhk6268]

Begode EXN vs Inmotion V11, which one would you choose? I am trying to decide between these two wheels, upgrading from a KS 16X, I love torque, but I also want commuting

[@rollindirty2666]

EXN all day. The V11 suspension isn't good enough to loose out on the power and range of the EXN.

[@nazzhk6268]

@@rollindirty2666 I ended up buying the master 😂

[@hg60justice]

my daughtter has a fear and trouble with dogs. she carries vicious dog spray now. she's been attacked enough times. once was in our yard from the neighbours dog. spray ever since then. and should you use it and the owner complains, just point out it was chasing and challenging, the words in most dog bylaws.

[@rollindirty2666]

Great advice. I've considered carrying some kind of a spray - sounds like it is effective.

[@hg60justice]

@@rollindirty2666 some are friendly and not taught boundaries by their owners, but for the aggressive, it's a sure stop measure if nothing else works..

[@jamesm217]

Those pedals sure do look sweet. Have you tried reaching out to damilola alade(afeez) hes the owner and from what I hear they have really good customer service, they just might be behind a bit from the holiday season.

[@rollindirty2666]

I found him and am reaching out. Thank you!