Rizoma Spy-R bar end mirrors - Ducati Monster 1200 S

[@ducatinyc]

Cute mirrors

[@timdrazba9489]

Hello, I need your help. At the 4:10 minute mark of this video you mentioned the bolt (blanken bolt 8mm???). Is this correct and where would I get 2. I took the stock mirrors off my 2022 Ducati Monster but now the fluid containers are not secure. What’s the name of the 2 bolts, what size do I need and where can I get them? Thanks. Tim

[@RK-MODE]

Nice video, how do to adjust the left handle bar to reduce the gap between the handle bar and the mirror. If you look at your video, there is one part where the metal insert comes out from the handle bar about 1 inch, but when you finally install the left mirror, the gap is gone? I'm dealing with this right now, the right mirror looks fine but the left one has this 1 inch gap. Any suggestions?

[@motorcycleMoff]

I think i know what you mean. I just slid my left hand handlebar grip across to close the gap. it does every now and then slowly work its way back but its just a simple slide across to make it flush.

[@НиколайСевастьянов-ж5ю]

Спасибо🤗

[@sinewell6513]

Hi - I've got a tight garage and have to push back the existing mirrors back on my Monster to fit. Can the Rizomas fold back or are they fixed? many thanks.

[@motorcycleMoff]

hi. First I just want to say thank you for watching the video. Really appreciate it. Yeah the mirrors can be folded in whenever you need them to. So I fold them in sometimes when I'm filtering. It's great because it means the mirrors can be mounted in any orientation. Thanks again. Stay safe!

[@4listor.official]

Is There a link for the Adapter? I cant find it

[@carlloveless5319]

Revzilla

[@sarahwensley8128]

Hi there Please could you tell me where you purchased the CNC Racing bolts from ? Do you know if all 1200 Monsters are 8mm thread ? I own Standard 1200. Many thanks 🏍🏍

[@motorcycleMoff]

Everything I used in the video I got from www.moorespeedracing.co.uk. I had to buy the adaptors (part name: LP200B) for the monster. I had a look in the fitting instructions for you. It’s badly printed 🧐but it does look like it says it’s a M8 bolt. I hope that helps. If I can find any online instructions I will send them your way. If you need anymore help then don’t be shy and ask away 🤓 Thank you for watching my video😁🤙🏼

[@sarahwensley8128]

@@motorcycleMoff Hi thanks for getting back to me if you can find the instructions this would help and I would be most grateful, send us your email and we will contact you if that's okay? Can you clarify what you mean by adapters? Many thanks 🏍🏍

[@motorcycleMoff]

I couldn’t find the instructions sorry but yeah the adapters. So to mounts the mirrors onto the bike you would need to purchase adapters that fit the bike. So the screws and the part that is used to hold the mirrors on are the separate adapters. The adapter part number is that LP200B from Rizoma. That adapter is the part that has the screw i used. I hope that helps.

[@crewe99]

Is the threadlock really necessary

[@motorcycleMoff]

Not necessary but because the bike does vibrate a fair bit, I like to put some on just to keep it secure. 🤙🏼

[@Flohw]

Hi, I am looking for new mirrors on my Vitpilen and I want some small ones as its the 401 version. I find inversed mirrors (under the handlebar) and directed towards the tank looks nicer. It looks like these ones can rotate to 380° but even with the small demo at 8:00 I am not sure they can rotate all the way. So, one simple question : can they rotate 380° arround the axle which is perpendicular to the handlebar? Thank you :-)

[@motorcycleMoff]

Hey first of all thank you for watching the video. So the mirrors you can have in almost any orientation. I did originally put them on facing down but later decided that up was easier and clearer to see behind me. You can rotate the mirror 360° at both the end of the bar section and also the mirrors 90° arm section. Plus the mirror itself can rotate round and be angles as well. I’m sure you would be able to get it into what ever position you liked. Cheers again and safe riding. 🤙🏼

[@Flohw]

@@motorcycleMoff nice! Thank you for the answer. I think I've found my mirror! 🙂

[@TheNeeks6]

@@Flohw Did you end up getting this for the Vit?

[@Flohw]

@@TheNeeks6 yes and it fit nicely. I have to put the mirror on the left of the handle bar. I am in EU so I had to take the largest one which don't fit above as I wanted but it's nice and discrete. Thank you!

[@lukesmall7660]

Do these mirrors fold in flush to the bars

[@motorcycleMoff]

To don’t necessarily fold in flush but you can fold them up or down so they don’t stick out. So if your filtering you can just move them in. Hope this helps and thank for watching the video. 🤙🏼

[@vladak8289]

did u use Red loctite?

[@slowwind-DUC796]

Hello! Monster 796. 80mm or 57mm, which size should looks better? 🤔🙂

[@motorcycleMoff]

I put the 57 on my bike since I liked the smaller size. Personally I think the 80mm would have been too big but I have had people say they prefer the bigger mirror for viewing behind them. Hope this helps 🤙🏼

[@slowwind-DUC796]

@@motorcycleMoff Thank you man! I think, I need to choose smaller ones 🤓😉

[@malcolmpritchard4882]

I was at nec bike show last month and at the Ducati stand and l asked them about space between clutch handle bar grip and the clutch reservoir the said you can get a spacer from Ducati to stop grip moving over . Do you find it more difficult filtering with the mirrors sticking out like that

[@motorcycleMoff]

Oh I didn’t know you could get a spacer. I will have to look into that. The grip does have a tendency to slide over. Cheers for that. In regard to filtering. Not really. It does obvious make it slightly wider but the mirrors are mega easy to fold down if need be. Plus I have the mirrors angled down slightly and I find that helps them to stay out the way of car mirrors. I’ve only ever had to fold them in once or twice since fitting them. 🤙🏼

[@dukatista657]

what kind of bolt you used to hold the reservoir after removing the side mirror? where did you get them

[@motorcycleMoff]

They are CNC racing ones. I can’t quite remember if they are a 8mm or 10mm. I more likely to say 8 but I would double check.

[@dukatista657]

@@motorcycleMoff appreciate it

[@ThatCleanMT]

Are the tube adaptors included with the mirror?

[@motorcycleMoff]

Thanks for watching and the comment No the adapters were sold separately. They were about £10 per adapter. Which is handy if you need to replace just one but also annoying since it extra cost on top of the mirror price. Hope this helps 🤙🏼

[@anthonysosa5860]

They are awesome I want some for my Vitpilen. 702 just wish they alwere just a wee bit bigger they look to smal

[@motorcycleMoff]

They do sell them in 3 different sizes. I just happened to go for the smaller size. Glad you liked the video. Thanks for watching. 🤙🏼

[@alessandrotesser6841]

Do you have vibration issues ?

[@motorcycleMoff]

The bike does vibrate a lot as you may have guessed but I haven’t had an issue with not being able to see in the mirrors because of it.

[@tomitomi7214]

Looks soo goodd

[@Zack.Y]

Nice 🙂 What did you do with the grey thing. On 5.45 minutes its still there and on 5.48 minutes its gone ? You cut iT of or what you did ? On my 1200 its still on there...but i hate the looks of iT ! Thanks in advance 🙂

[@motorcycleMoff]

Ha sorry i never even noticed. No i never cut it off, I've just slid the handle bar grip closer to the end of the bars. I totally agree with you. I never really noticed it with the OEM bar end weights on since they were silver but when i put the new mirrors on i stood out really badly. So for now I've just slid the grip over so it sits flush. I do plan to change the grips in the future so hopefully the new ones will also help make it look neater. Cheers for watching 😃

[@la_barth6899]

Hello dude, nice Bike Gonna buy the rizoma too for my monster 1200s. What is the reference for the CNC Racing ? TY

[@motorcycleMoff]

Thank you. Yeah highly recommend the Rizoma mirrors. Love them. What do you mean sorry? The cnc racing plugs to replace the original mirror bolts? Thank you for you watching 🤙🏼😁

[@la_barth6899]

@@motorcycleMoff yeah I found on CNC Racing, is that the M10 or M8 ? Thx bro

[@motorcycleMoff]

They are the M8 bolts mate. Had to buy a left hand and a right hand thread separately. Hope this helps 🤙🏼

[@Irving_821]

nice video bro love the look, do you know if the 821 and the 1200 have the same bar diameter???

[@motorcycleMoff]

I couldn’t tell you sorry but the adapter kit that I needed to buy to attach the mirrors comes with both a small and a large adapter. I can’t say for certain but I wouldn’t be surprised if one of them did fit. 🤙🏼 hope that helps. Cheers for watching 👏🏼

[@Irving_821]

@@motorcycleMoff ty for answering, new sub, greetings from México

[@motorcycleMoff]

Aww thank you mate. Really appreciate that. Wow México. I guess all I can say is Hola from the U.K. 🇬🇧👋🏼🇲🇽

[@SinDzgaming]

@@motorcycleMoff By the way, do the mirrors buzz/shake at higher speeds and is the visibility restricted? Thanks for the answer!

[@motorcycleMoff]

Apologies for the late reply. To answer your question. The visibility is great because the mirrors are convex so you have a good field of view plus because the mirrors are out at the bar ends then you have nothing blocking your view like elbows or anything. I 100% prefer them over the OEM mirrors. I can’t say I notice any vibration. The bike I have them on vibrates quite a bit anyway and I have no issues with the mirrors at all. Hope this answers your question. 🤙🏼

[@MrAlfasul]

VERY NICE VIDEO iiii AI WAS LOOKING FOR THE PUIG ONES BUT THEY ARE AND LOOK VERY CHEAP ON A MONSTER 821 FROM 2019

[@motorcycleMoff]

Yeah I looked for ages before settling on the Rizoma ones. They are expensive but definitely worth it.

[@dipendrasubba8668]

Does it fit on my m797?

[@motorcycleMoff]

If the bar diameter is the same on 797 to the 1200 then you will need the adapter to fit but I can’t say for certain. You can find out on the Rizoma page if you need the adapter. Which does give you options. The whole set came with both a thicker and thinner adapter so I would like to think one of them would fit. Hope that helps and thanks for watching 😄🤙🏼