Rlaarlo Omni Terminator Radio Setup & Guide | HotRc CT6-A 2.4Ghz Turotial

[@williamwallace9427]

THANK YOU!! best tutorial out there

[@RakishRc]

Thanks for watching! 👍

[@WILD_HAIR]

Thank you for this video!!! I was having a hell of a time. The fact that you have to turn it off and hold buttons when turning on is wild to me. But youve helped me out alot!!! Thanks

[@RakishRc]

Glad to know it was helpful. Thanks for watching👍

[@Hungrybird474]

I highly recommend this video for this remote and receiver combo 👍👍

[@RakishRc]

@@Hungrybird474 thanks a lot! 👍

[@stefan-norge]

Thanks for your review. My gyro works well. Setting it is a pain but on gravel/dirt it works well.

[@RakishRc]

@@stefan-norge nice to know that. Have fun 👍

[@ZachStillwater]

When youre in gyro mode and adjusting it you can keep it in gyro mode and drive it normally until you find the hyally spot you want the gyro set at then hit the button tongo back to normal mode. Or you can just continue to keep it in the gyro mode and drive it and adjust the gyro on the fly

[@RakishRc]

Hi, yes i did try that yesterday..as you said it can be adjusted live and then saved. Thanks for highlighting

[@domepop]

I run the gyro at about 20% on the first setting and zero on the second. The second setting affects how the gyro overrides your steering input. I don't like the gyro to affect my steering input. If you run it like that, you should find that the gyro keeps the car straight but doesn't affect your steering inputs.

[@RakishRc]

Thanks for the tip. will try it and see again. Its good to have gyro for speed run..last time i tried it kept locking the steering in one direction.

[@Edward-wk9su]

Thank you 🙏 and awesome video🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

[@RakishRc]

@@Edward-wk9su thanks

[@SiRTHiZZL3]

Thanks for this video. Only one thing isn't covered that i was primarily interested in. Are you aware if this radio has multi-model memory? Or can it only be bound to 1 receiver? If it has model memory, need to know how to set it up as i would like to run all my Rlaarlos off this transmitter!

[@RakishRc]

It doesn't seem to have model memory feature as there's no option to select any model number. Although you could try and bind a radio on two receivers and check.. I don't have a spare receiver to test.

[@stefan-norge]

Switch A improves the initial punch. Wheelies much more if this is engaged.

[@RakishRc]

I guess the turbo is what's on the third channel Switch A with the yellow single wire of esc. Did test it though.

[@Hungrybird474]

It’s hardly noticeable

[@stefan-norge]

@ hmmm, I can see it lclearly, much more wheeling….

[@noyzmunky]

​@@Hungrybird474first go out and I noticed a big difference in acceleration when it's pressed

[@pipependulum2742]

This is great thank you! Do you know if there is any way to tell if my new Carbon terminator is the V2 version with the fixes or the old version? Does it say on the box?

[@RakishRc]

If you bought it recently then it's probably v2 although not many significant changes other than the radio. On the box it doesn't mention the version number as of yet

[@noyzmunky]

What does ths slider switch do?

[@RakishRc]

For channel 3 it is.. If connected to a servo or light you can control using the slider switch.. Otherwise it's not in use on this truck

[@noyzmunky]

@RakishRc cheers.

[@Hungrybird474]

Just lock it after you set it and it will be good to go

[@senortaco7421]

I am looking to buy this RC. Is the car not ready to use out of the box? Or is it a complicated RC for a new user? I just want to buy something easy to use , fun and durable.

[@RakishRc]

@@senortaco7421 it's ready to run out of the box.. Has a lipo battery and a usb charger included. It's good and durable so nothing to worry 👍

[@noyzmunky]

Just got mine. Ready to rip out the box. The gyro is not really needed for bashing. It's a great bit of kit.

[@corymedlock5884]

Is their a way to go back to factory reset??

[@RakishRc]

Not sure but don't think so as it's not mentioned anywhere in the manual.

[@rayharrington2466]

Does anyone know how to reset the truck and transmitter or is it possible? I’ve got no controls. I’ve tried to binding.

[@Hungrybird474]

It’s just hold the bottom on the right to lock and unlock

[@Schmidt3850]

If your an off road basher which is what the truck is designed for the gyro is useless. What's to set up. Turn it on plug a battery into it then bash.

[@OnDrums77]

They use this same setup for their rally car which some people like to race and drift. I imagine it’s just easier for production to use as many of the same parts so they don’t have to pay more to customize changes.

[@Schmidt3850]

@jesseondrumsjd Anyone with a shred of intelligence in this hobby can see the Terminator is also the rally car.

[@OnDrums77]

Damn dude. Whoever hurt you it wasn’t me. Just commenting why a gyro would be present. Nothing negative about it. Anyone with any intelligence also knows a gyro is useless for a basher putting you and your comment in the category of the unintelligent ones.

[@Schmidt3850]

@@OnDrums77 the gyro is for the fools that want to turn the Omni Terminator which is an off road basher into a street truck which l think is stupid you want an rc street vehicle then just buy one. Now I will repeat myself anyone with a shred of intelligence in this hobby knows this.

[@shugyoforyou211]

I guess if I wanted something that was fun and easy to use out of the box, I picked the wrong model. The manual is a disaster and the company video is hold music, hand gestures and subtitles that wouldn't make sense to anyone but a Chinese engineer whose second language is English 🙄

[@RakishRc]

@@shugyoforyou211 model is good. The terminator carbon fiber version is really good and durable. The radio is also good just need to be aware of it's user interface. Yea the rlaarlo videos are a mess.

[@shugyoforyou211]

after sifting through the manual and a few more videos, I finally figured it out. Having a great time tearing up my yard! Thank you for the reply 🙏

[@rayharrington2466]

Does anyone know how to reset the truck and transmitter or is it possible? I’ve got no controls. I’ve tried to binding.

[@RakishRc]

@@rayharrington2466 check your dials.. It may be at zero so no steering and throttle. Or the hybrid mode may be on.

[@RakishRc]

@@rayharrington2466 my friends truck out of the box had no control.. We had to re bind it. Highly suggest to re bind and double check the dual rate dials are set to 100. Are the wires plugged in the receiver in correct order?