Rlaarlo Omni Terminator S2 Shock Stands And Pinion Swap

Rlaarlo Omni-Terminator Carbon Fiber Edition 27T pinion change and S2 shock stands pov.
Rlaarlo Omni Terminator Carbon Fiber RZ001 amzn.to/3CnfVos
S2 Alloy Steel Shock Absorber RZ001 Stands amzn.to/4atMMoa
S2 Alloy Steel Differential Cups RZ001 amzn.to/3E2AzKQ
Rlaarlo Paddles Snow Sand Wheels RZ001 amzn.to/4gbIwKY
**You can also buy x4 paddles straight from Rlaarlo just choose 2 sets of rear rlaarlo.com/pr...
Products used in this video:
Carbon Felt Welding Blanket Fireproof amzn.to/3EaOqis
Bernz-O-Matic ST2200T Micro Flame Butane Torch Kit amzn.to/4ht8db1
MOO-Kleen Part & Chassis Wash 8oz Pre Mix cowrc.com/moo-...
#rlaarlorc #rlaarlo #rccar #rcar #rlarrloterminator #pov #toys #toysandhobbies #hobby #remotecontrolcar

[@Hungrybird474]

I’ve been having an all with this RC for a year now . Some Gorgon tires with 14mm arrma hexes fit over the Rlaarlo pin . Copperhead2 s were interesting as well . The stock tires are good , just messing around . I think it’s running a 27t with the power around 75% . I’ve been through a few diff cups and dogbones . There’s a tool on Amazon , bike chain tool that removes and inserts the dogbone pins . Same price as a set of dogbones . The diff cups eat them when they start to wear and become sharp . Either file them smooth or switch out . For a little car though , this little nimble rig is a lot of fun .

[@itspetenova]

It seems like the version of the RC I have has stronger cups as they are still mint after a good amount of abuse, thanks for the comments great insight I appreciate it 🍻👍

[@Hungrybird474]

The adu racing shim pack has 6s Arrma wheel shims and the Rlaarlo Omni size in case you lose a wheel shim . I added an extra shim and the tires have zero wobble now . This is such a sweet little ripper

[@Hungrybird474]

You can straighten out the wheelie bar screw brother 👍 if you don’t have replacements . Prob best thing I’ve done in RC is to get a 1/10 and 1/8 screw kit for extra pins and screws , washers , etc . Very handy to have imo

[@itspetenova]

@@Hungrybird474 yes I’ve been maintaining the wheelie bar for a bit with new hardware but once I totally lost one wheel I decided to just take it off as I’ve been pretty good on the trigger to keep it from flipping on it’s back.

[@Hungrybird474]

I lowered mine as well a month ago and we shall see if it helps with the cups .

[@itspetenova]

Yep my cups were good so either they have changed the cups in the past several months to stronger ones or lowering it slightly when I took it out the box has helped prolong them

[@Hungrybird474]

Any broken e clips under the shock pistons yet ? Thanks

[@itspetenova]

@@Hungrybird474 I have not broken anything really but sooner or later something will give specially in cold temps

[@billcody26]

Is that simple green?

[@itspetenova]

Moo Kleen cowrc.com/moo-kleen-new-part-chassis-wash-32oz/

[@billcody26]

@itspetenova thank you boss!