Airgun / PCP 0-Ring Seals Pt. 2-3

[@prof.isaganiortiz5719]

i used teflon tape under the o-ring and it worked well.changing o rings wont solve the problem.using a a Teflon tape does it.

[@clickireland1113]

Absolute God-send Robert Thanks very much.

[@robertlanedesign]

They were usually in Alloy with Brass Fittings, but you may find them second hand in all Brass, all Stainless or a combo. (Never Alloy for Piston or Screw).

[@SteHughes]

Hi robert do you/could you do a replacement reg for the EV2? I'm really interested in this, I've sent my gun back to AA three times now and it still goes wrong every now and then. If you look at a EV2 the reg is the only thing holding the air tube to the breech, the breech takes a 5/8th BSP thread so I was thinking you could create an 'adapter' between the breech and air tube and put your reg in the tube like normal or you would have to replace it, I'm happy with either if you could do it?

[@hdudic]

Hi Robert, what material is this pressure vessel made of?

[@dadasahebpawar9461]

Silicone O ring use in air guN

[@escapeno4430]

Hello

[@robertlanedesign]

Hi Ste - I have been trying to get you via email / messenger but you are on contact lock & so I cannot get hold of you!!! bar comment on here. Take Contact Lock Off.