If you are looking for 50A or higher, then see this video kzbin.info/www/bejne/g57bqGqKZ56NbM0
@josee.sierrav.130126 күн бұрын
Greetings from Panama, I would like to ask about the YB5145B-V1 meter. IT IS AN AMMETER AND WHAT IS ITS MAXIMUM CONTINUOUS CURRENT AMPERAGE AND ITS POWER SUPPLY. ALSO, IF YOU CAN MAKE ANOTHER VIDEO SHOWING ITS CONNECTION DIAGRAM
@robojax26 күн бұрын
Greeting, have you watched the video? All your questions have been answered in the video. All specs and wiring and test.
@peterdkay4 жыл бұрын
You have a 15mA zero error. Mosty meters provide a means of zeroing meter with zero current. On this board, if you short the pads on the top left corner of PCB (see 5:05 of your video) and then turn power ON. Then release short and cycle power, it should remove zero error.
@robojax4 жыл бұрын
there was not instruction on that and I didn't want to predominantly damage it. The top left corner jumper pad (I believe) are for units of settings of the meter. and we have 5 pad. I've purchase 3 of them so far and they all have different pads shortened. I will see experiment with them to see if I can resolve it. Thank you for the comment. I didn't know about this zeroing of meter. Thanks.
@__-hh3gt3 жыл бұрын
Thanks for good reviews.
@robojax3 жыл бұрын
My pleasure!
@CADElectronicsTH2 жыл бұрын
Thank you.
@electronic79794 жыл бұрын
👍
@robojax4 жыл бұрын
😊
@nationalmarketing30824 жыл бұрын
sir can you make a video on SIM800L GSM Module
@robojax4 жыл бұрын
I will try. right now I've got over 200 projects waiting to be done.
@neerajhebbar73134 жыл бұрын
Love you sir🥰
@robojax4 жыл бұрын
love you too.
@edinfific25764 жыл бұрын
The video is a little too long, and you should have measured the consumption current of the meter.
@robojax4 жыл бұрын
Yes it would have been nice but not important. This is based LED and it consumes like about 60mA which is 0.6% 10A. So it is negligible.
@edinfific25764 жыл бұрын
@@robojax Compared to the maximum current, it is negligible, but if I'm measuring the charging current from a solar panel, it can be a significant portion of the total current available at times of low output. In a 24h period, this meter consumes a whopping 1.44Ah, which is unacceptable in many solar- and battery-operated applications. I like your videos and tests, I just wanted to point this issue out. 👍🏻