Roborock S5 Max Disassembly & Assembly

Roborock S5 Max Disassembly & Assembly
Zerlegen und Zusammensetzen eines Roborock S5 Max

[@peterram9]

5:26 The screw legend. Absolutely necessary to keep track of all the types and number of screws from the device

[@xiaotheman]

successfully replaced my wheel assembly using this, can't thank you enough

[@SlothyWoffy]

I take it you don't need to disassemble everything like in this video?

[@SlothyWoffy]

Maybe only access to main board and side bumpers off to remove and fit the silver bar for the wheel? Am I right?

[@captcoma]

Thank you for your content! Tried to remove the main wheel but could not find any manual for it. Well done! This video got linked on reddit.

[@XviewsTech]

thx

[@banhilo]

Many thanks for your video. I needed to open and clean after 1.5 years of use. I had a spider nest on the lidar , the robot was really weird these days. 😂😂

[@SlothyWoffy]

Can you do a mini tutorial just for wheel replacement?

[@SgtSludge]

I would love to get that too!

[@luizgustavopinheiro6996]

Congratulations!! Best video!! Tive um problema com meu sensor de penhasco (Cliff sensor). Fiz a compra de novos sensores pelo aliexpress e fiz a substituição seguindo seu vídeo! Excelente! Graças a você consegui arrumar meu robô.

[@WCIIIReiniger]

Thanks, you saved my robot. It had a water damage after an unfortunate event and with this video I was able to clean the motherboard which got the battery running again.

[@sicherheitssventil]

Hey, war es bei dir auch so, dass der Roboter nicht mehr geladen hat?

[@sicherheitssventil]

Mir ist nämlich wohl etwas Wasser ins Gehäuse gelangt, als ich den Roboter gereinigt habe

[@WCIIIReiniger]

@@sicherheitssventil Ich sag mal so, kurze Zeit nach dem Unfall hat er sich komplett ausgeschaltet und dann habe ich nicht versucht zu laden, um größere Schäden zu vermeiden. Nachdem ich den Roboter gemäß anleitung geöffnet, mit Isopropanol gereinigt und getrocknet hatte, habe ich ihn wieder eingeschaltet. Leider funktionierte der rechte Antrieb immer wieder nicht, sodass er nicht losfahren konnte. Ich habe ihn dann noch einmal auseinander genommen und dieses Mal bis zu den Antrieben. Den betroffenen Antrieb auch auseinander genommen. Seitdem funktioniert er wieder einwandfrei. Vermutlich haben Haare, Dreck und Feuchtigkeit einen Kurzschluss verursacht. Vor dem Reinigen und Trocknen solltest du den Roboter nicht mehr einschalten.

[@lakisbouz]

Outstanding video, thank you so much for your time and effort.

[@wrongstars1132]

Wish I could like this a million times, was so helpful

[@djtommy1864]

Thank you so much for this video. this bot was slightly different than mine. only one area was different but because of your video i was able to take apart my s5 to solve an error 10 problem that kept saying to change the filter when it was brand new.

[@xjwalker]

Hey mate, did you work out what was causing this? Having similar issues and figured it must have something to do with the fans

[@djtommy1864]

@@xjwalker Yes I solved it, the piece that was removed at 1:59 was blocked . once i cleaned that and put everything back. everything was fine. Best for luck to you. its a bit of a pain to remove everything but it's worth it.

[@remifranco4608]

La vidéo PARFAITE de montage et démontage. Clair, net, précis. Et le repérage avec nomenclature ça c'est vraiment top. On ne peut pas avoir peur de se lancer dans un démontage ! Je démonterai mon ROBOROCK sereinement et moins "à l'instinct" qu'avec mon ancien iLIFE V7S pro !! XD

[@panzowirt2344]

best teardown. one of my charging contacts got corroded, need to replace them

[@DaFaultier]

Thank you! Real lifesaver

[@bobbaeyens4537]

Brilliant!

[@albotellonazo]

Bufff!!! The BEST puzzle!!!

[@viverezwhosayn1618]

Thank you very much, I would never have been able to do it without this video. I hope for 1 million subscriptions. Can you teach me that? I wish you a nice day

[@cheapplantedaquarium]

Thank you so much …. You solved my problem

[@fzshousha6840]

Thank you very very much for this video!

[@DavidSmith-gq3mv]

What about the small motherboard part?

[@WhineMorePlz]

Can you do a wheel removal tutorial

[@TobinLam]

Im using this video to take apart and clean my S4 Max. It’s close enough that this video really helped. It seems most, if not all, of the steps up to wheel removal in the video are necessary.

[@rufaidajavid81]

Can you help me in showing only wall sensor replacement from close angle..do I still need to remove everything for it

[@Daniel-hd7gq]

Thank you!

[@zane812]

Excellent, thank you

[@billb1413]

Where exactly does the bumper attach? I can't figure out how to reinstall it.

[@kristenwelker6493]

Very helpful, but didn't prepare me for the amount of dust and hair that had penetrated every crevasse of my machine.

[@emrahakdogan1736]

Thanks for that perfect video bro

[@leventaksoy386]

Thanks, it helps to clean fan and fix error 18

[@absorbinglife]

Thank you so much!!!

[@eddzonee]

Is there anyway you would know how the dustbin/mop sensor works? It see the bin but not the watertank, ive disassembled and verified if the sensor is in the corect position, but still not working.

[@Iliovasilema]

Thank you very much. This screw under the side brushes motor made me crazy. Why someone had such a stupid idea to hide a screw 😅

[@boneymaloney]

Thank you for this, I solved my S5’s “error 10 - Filter is clogged” problem by cleaning out the fan (1:59 in the video). Time consuming but take it slow and don’t lose any screws :)

[@user-rx9fm8ok1l]

Thanks!

[@nppazcar4426]

How to fix a robotic vacuum cleaner Roborok 5 - which stops working after a few minutes.

[@dvlcube]

There's an unremovable pin preventing the upper housing from being detached. Does anyone know what to do with this?

[@hermesmariani]

Same 4 me 😅

[@xPsIXx]

What are you wearing on your wrist?

[@PilipinasViralTrends888]

i have one of that and it has an cliff sensor problem,, i hope you can make a video on how to repair or fix that,,

[@kamdenabdullah614]

i guess Im randomly asking but does anyone know of a method to get back into an Instagram account?? I was dumb lost the password. I appreciate any tips you can offer me.

[@christophercristiano4579]

@Kamden Abdullah instablaster ;)

[@kamdenabdullah614]

@Christopher Cristiano thanks so much for your reply. I found the site through google and Im trying it out now. Takes a while so I will reply here later with my results.

[@kamdenabdullah614]

@Christopher Cristiano it did the trick and I now got access to my account again. Im so happy:D Thanks so much you saved my ass !

[@christophercristiano4579]

@Kamden Abdullah you are welcome :)

[@sacitolcal6665]

Mükemmel

[@baranbaris1172]

hi, I want to ask a question about battery performance and life in general. I am using s5max. When will the battery lifetime start to decrease if we use it at least once a day and everyday in a week ?

[@JustSomeGuyLV]

It's battery chemistry that answers all questions about life cycle - since it's li-ion battery, generally speaking it gives 500 charge cycles before starting to deteriorate. Emphasis on ''generally speaking'' because life cycle of li-ion battery greatly varies on charging aspects (if battery gets fully discharged, fully charged, rate of current etc).

[@pilotavery]

500 cycles is full discharge. Going down to 50% does only 1/3 or 1/4 the wear.

[@pilotavery]

So probably 3-5 years

[@RETEX24BBC]

So many screws... Screw me!

[@oguzhanduman7909]

where can i buy that parts

[@ozankara276]

man doing like poem

[@tugbaalmc715]

İ cant install the front bumper assembly it should be loose but when i screw it it is so tight why give me a clue to do it correctly

[@ChrisRadloff]

I have the same problem... Did you find a solution?

[@danielhaazebroek997]

@@ChrisRadloff Did you find a solution? Same problem overhere :(

[@lugia99bc]

Just wanted to replace my fucking wheel, why can't they make it simple instead of locking with unremovable pin unless you disassemble everything

[@samerahaickl5746]

بدي مسعده عند المقينه بطياء شو اسوي

[@72armania]

Irobot first )))

[@SandyToesDetecting]

thats a lot of screws