Roborock S6 Filter blocked or wet without disassembling

Рет қаралды 18,064

Күн бұрын

I just had enough of this f**** p**** of s*** so I decided to fix this problem on the easy way... Its obviously a design failure from Xiaomi / Roborock to NOT let you clean the inhaust from the little motor... so get your tongs out and tune it

Пікірлер: 16

@richopalka2295 Жыл бұрын

You’re a genius! I successfully used this method to clear the filter on my S6 Max. I didn’t remove the grid, however. I used painter’s tape to mask-off most of the grid and then more painter’s tape to seal the vacuum nozzle around the remaining (unmasked) grid section. I let the vacuum run for about 10 minutes and tested the vacuum - Success! Thank you!

@sosbagramyan5931 2 ай бұрын

This worked! You saved me a lot of time and effort. Thank you!

@MrStansted 3 ай бұрын

Perfect., thank you! Worked for me. Bad designed product🙄

@moab67 9 ай бұрын

I’ve had this problem a couple times and this is exactly what I had planned to do. Glad I’m not alone in wanting to remove the grid. 😉

@MarkSchipper1 7 ай бұрын

Yep, this worked. I duct taped some hose to the vacuum attachment to really get in there at 90 degrees and under the strainer.

@gudmundurp67 7 ай бұрын

Great, worked for me, It is good to give it a little bumping on the side while vacuum cleaner is sucking, to loosen the dirt better

@caiodealmeida8931 Ай бұрын

Top!!! Ajudou muito aqui no Brasil

@rebacontube Жыл бұрын

Now I need a vacuum cleaner to clean the vacuum cleaner 😂😂

@brod478 Жыл бұрын

thanks,.. just got this error last week,.. and i changed the filter. gonna try your way. didnt know this was a option.

@seidlacademy6796 6 ай бұрын

Thanks for the video. I have the same issue. What I recognized is, that the included brush/knife tool exactly fits the grid. So with this tool I was able to clean the strainer. I don't know yet if it worked, but I am optimistic 🙂

@TheBlackCat_bln Жыл бұрын

Thank Works on S5 MAX,too. The plastic grid is destroyed, but the error message is gone. In suction operation with a filter, this grid is of no use anyway. Or rather obviously: they would have used a detachable grille if they had wanted to! Just look at older models, there its easy to reach and no grid.