Thanks it was great to see a demo showing both types of scrapers and the pros and cons. David in Clev.
@alanmullock3812 жыл бұрын
Good tutorial on scrapers Sam!👍👍👍👍👍👍👍👍👍😎😎😎
@jackthompson50922 жыл бұрын
A great tutorial on scrapers Sam. Thanks a lot.
@trurex007lee72 жыл бұрын
Thanks for the explanations on the differences. A “jingle” to help remember where my tool rest should be, “down and out” for the outside,the inside is the opposite.
@carolriley84722 жыл бұрын
Lots of really good info, Sam...thanks!
@jimbalz30172 жыл бұрын
very instructive. thank you.
@joelspring24872 жыл бұрын
Excellent explanation and comparisons, Thank You
@robutzinger27492 жыл бұрын
Excellent tips for scraper and neg rake. Next paycheck I’ll get a neg rake.
@daveb.misc.25892 жыл бұрын
Very well explained Sam. Those Robust scrapers look to be nice tools. Thanks for sharing the info!
@michaeldennison35482 жыл бұрын
Great work Sam!! Very informative. Still learning how best to use my scrapers.
@masjabrikdiy84222 жыл бұрын
hello friends greetings healthy and successful always. thank you for sharing knowledge and always faithfully watching your latest things @
@davidmorgan75222 жыл бұрын
Nice review of the scrapers Sam. But mostly the great explanation and showing the uses for the scrapers. Thanks for sharing! Take care, Dave
@WYOMINGWOODTURNER2 жыл бұрын
These are really nice tools.... be safe. Oh, by the way, I spoke to our board last week when we met, they would be happy to have you do a club demo for them. Our club is struggling to get members to do demos (besides me and one or two others). It would be fun. Sam
@davidmorgan75222 жыл бұрын
@@WYOMINGWOODTURNER Thanks Sam! We'll work something out. Dave
@dannyboy97842 жыл бұрын
Nice video explaining when and how to use them.....Cheers
@tick_magnetedschaper56112 жыл бұрын
Looks like I have not been sharpening my negative rake scraper enough. Back to the grinder I go. Thanks Sam!
@joehimes98982 жыл бұрын
Thank you
@dougrobins82912 жыл бұрын
This was just right. I've been using a traditional scraper for the inside of my bowls but having trouble with it when getting close to the top. I've tried tilting it by about 20 degrees, but even with that have had a catch. I will certainly get a negative rake scraper, as it looks like it should give better control on the inside of the bowl, near the top. Thanks for the tips!
@dougsutherland66942 жыл бұрын
Very informative Sam!
@davidbaulch32232 жыл бұрын
Nice work, Sam. Personally, I have found if I have any torn grain my scrapers, negative or traditional, have a tendency to make that worse and not repair my error. Tool marks seem to come out fairly well, though.
@DancingFox62 жыл бұрын
Sometimes if I have tear out especially around where a branch was growing I find it helpful to reverse the direction of the turning and scrape or cut from the back side. (Of course I use screws to secure jaws or faceplate to the lathe)
@davidbaulch32232 жыл бұрын
@@DancingFox6 Sometimes it works and sometimes it doesn't - for me, at least. I will try it again next time I am doing a major bowl turning - probably coming up very shortly, I'm guessing.
@markjupina1782 жыл бұрын
Great information Sam. Why not use negative rake exclusively for every application?
@GeraldJensen2 жыл бұрын
Can you restore the burr on these scrapers with a burnishing tool like the one Alan Lacer uses? Love those handles!
@WYOMINGWOODTURNER2 жыл бұрын
Gerald, yes you can. Back in the day.....I used card scrapers a lot. They are, as you probably know, sharpened in a different way. But we can use a burnisher or a hone to establish a burr or restore the burr. My thought it just takes longer and more effort than just going back to the grinder. AND, these burrs can be worn away so quickly. Regards Sam
@ralphvanpelt13562 жыл бұрын
Great video explaining scrapers. Why did you use a spindle gouge instead of a bowl gouge on the outside of the bowl and what is the purpose of using the mineral oil on the “fuzz” as you called it. Thanks again, I enjoy and learn from all of your videos.
@WYOMINGWOODTURNER2 жыл бұрын
Ralph, this is a 5/8 inch spindle gouge. It is very large and works fine for the outside of the bowl in this video. There is nothing wrong with using a spindle gouge on a bowl. Or a bowl gouge on a spindle turning. Just don't use a spindle roughing gouge on cross grain work. I used Mineral oil to stabilize the wood fibers so they would cut more smoothly. SAM
@ralphvanpelt13562 жыл бұрын
@@WYOMINGWOODTURNER thank you
@pthsdo2 жыл бұрын
This may be a silly question... could you profile one side as traditional scraper and the other (flip the tool) as negative scraper? Since only the left side of tool is most often used anyway.
@WYOMINGWOODTURNER2 жыл бұрын
That is not a silly Q' I think it is really creative-you may have invented a million dollar tool idea. Who knows. I think it is possible. I would imagine that it might be left to an engineer to figure out how to do it. If you have a tool to experiment with, you could try to make one. Better yet, make one from a piece of wood. I think making the transition might be the challenge. It may look a little weird but might work. Good luck. Sam
@williamdodds61042 жыл бұрын
Sam got a question, I am having some issues with torn end grain (furry spots) did I hear you say something about mineral oil for that?
@WYOMINGWOODTURNER2 жыл бұрын
William, I just saw your inquiry for a turning class. I sent you an email. To your question about mineral oil: The mineral oil will help stabilize the end-grain and help prevent tear out. You could just use water or use the finish you intend to put on the item like linseed oil or even shellac. Nothing magical about mineral oil-but it is a little heavier than water. Sam
@dicktorkildson97522 жыл бұрын
Thanks Sam always helpful. So what's your take on wheel grit and burr serrations for a truly smooth cut? Higher grit # for less serrated a burr and smoother cut?
@WYOMINGWOODTURNER2 жыл бұрын
Yes you are correct. The higher grit wheel will produce a cleaner cut from the burr but the burr will wear off easily. I always use my coarser wheel: 80 grit. Sam
@roomold95312 жыл бұрын
Good scraper presentation. Is your burr straight off the 80 grit cbn?
@WYOMINGWOODTURNER2 жыл бұрын
Yes it is Sam
@mdjabedsyllhet89492 жыл бұрын
I need a job this can you give me a job your company please sir