RZR Ride Command RZR14RC-STG6 Installation (Gen-3)

[@AdventuresofPanda]

Rockford dropping 16 install videos at the same time. Nice

[@rockfordfosgate]

That's how we roll!

[@Minibikemike123]

I just ordered some coaxial speakers from the prime series

[@rockfordfosgate]

Thanks metal complex for upgrading your ride with Rockford Fosgate!

[@matthewderry6475]

Is the 4 channel M5 800X4 amp a direct replacement for the Fosgate 2 channel part #4017614 that comes on the 2021 RZR turbo s, plug and play?

[@rockfordfosgate]

@@matthewderry6475 No, the factory amplifier and the aftermarket M5-800X4 are not interchangeable.

[@hectorreynoso9886]

I have this stage 6 on my turbo s. I have a audible noise that comes out speakers unless the suspension setting is on firm. Why would that be ?

[@rockfordfosgate]

Unscrew the amplifier and place a piece of cardboard underneath it. Turn the system back on and cycle the suspension settings. If the noise goes away, use some nylon washers to re-secure the amplifier, so the mounting screws don’t physically touch the heatsink.

[@rockfordfosgate]

PRODUCT DETAILS rockfordfosgate.com/products/details/rzr14rc-stg6/

[@michaeltoro6057]

Are you guys going to make one for the yamaha?

[@rockfordfosgate]

Hi Michael, we do have kits for the Yamaha YXZ that you can see here: rockfordfosgate.com/products/details/yxz-stage5/

[@geebeee04]

What should the amp setting be at?

[@rockfordfosgate]

The amplifier is already pre-configured. The INPUT = 4-CH and the PRESET = ON. The preset switch engages Rockford Fosgate’s own tune for the best performance possible.

[@johnkanoff3328]

Does this fit 2022 rzr models

[@rockfordfosgate]

The compatibility for 2022 should fit fine as no major frame design changes occurred. We're working on updating our COMPATIBILITY tab to add the new model year. Just make sure the frame style is one that you own (Not Pro XP): rockfordfosgate.com/products/details/rzr14rc-stg6/

[@vincentv646]

I wish the subwoofer enclosure had a mini glovebox like the SSV works version. I'm sure the Rockford one better but would still be nice.

[@rockfordfosgate]

Thanks for the feedback Vincent. Our 1st generation subwoofer enclosure did retain a glove box. However, based on dealer and customer feedback, many told us they wanted more bass, even if that means removing the glove box since many told us the didn't use it. We made the decision to make the 2nd Generation enclosure have better bass performance with the option to be sealed or vented, giving fanatics exactly what they asked for.