Making Custom Wood Shutters

[@makingathome]

Excellent video. These look a lot less intimidating than I was making them out to be.

[@rockler]

The jigs really make it easy. It was a fun build!

[@DanielOlivierArgyle]

Great video thanks! Spring loaded louvre pins would make assembly a little easier.

[@rockler]

That would help! Adam made more of these and said he put a piece of blue painters tape, from end to end in the middle of the rails and parallel to the stiles, to help hold the louvers. He found great success and ease with this method.

[@kashsh4686]

What other wood can i use for the shutters? Where I live the stores (homedepot and lowes)does not carry basswood. Please advise.

[@rockler]

Basswood is the most common. It is light, soft, and easy to work with. It takes paint nicely as well. You can order basswood on our website. If you use our Shutter Design Wizard, it will calculate how much basswood will be needed for your shutters. In the inventory list generated, it will give you item numbers to order exactly what basswood you will need to build them. However, if you don't go that route, Poplar may be a good alternative.

[@thomasgriffin8269]

Could you make blinds for a travel trailer??

[@rockler]

Don't see why you couldn't!

[@garystrittmater8258]

Super idea, I wonder how you keep the wood from warping due to the sun and heat?

[@rockler]

Most home windows are made with UV protection. Between that, a good protective finish, and properly dried wood to start with, warping should be minimal, if at all.

[@andrewbroderick4895]

Hi, any idea if these products can be bought in/shipped to Australia? Thanks

[@rockler]

Hi Andrew, we do ship some items to Australia. If you click on the flag in the bottom right corner of our website you can change it to your country. During checkout, you will see if any items are unavailable to ship to you along with the shipping cost. Thank you.

[@S0m3OneGuy]

Where can i find the metal piece

[@rockler]

Hello, The hidden control arm is available on our website at - www.rockler.com/hidden-control-arm-for-shutter-louvers - Thanks

[@HONCH123]

Beautiful, Thanks

[@Crafty.at.Heart24]

Great video!!

[@rockler]

Thank you! 💙

[@LolaMay30]

I can't seem to find metal arms online, are they called anything else/can you link me up please? Fantastic video

[@rockler]

The metal hidden control arms are available on our website at - www.rockler.com/hidden-control-arm-for-shutter-louvers - Thanks!

[@LolaMay30]

@@rockler Fantastic, thank you so much for your time! Happy new year to you x

[@rockler]

You're welcome! Happy new year to you too!

[@kashsh4686]

where can i nd the list of measuring and drilling tools u used? I did not find all the tools on the website.

[@rockler]

If you input your dimensions that you find by following our measuring guide - go.rockler.com/tech/44342measuringguide.pdf - into the design wizard - shutters.rockler.com/louver.cfc?method=start&louverType=m&louverSize=2 - the last pages will have an inventory list of all the jigs, and materials you will need to make the shutters. Note that the correct size drill bits are included with the jigs. Here is a list of other items used in the video, and to measure and drill with: Tape Measure - www.rockler.com/12-speed-mark-tape-measure Rockler height gauge: www.rockler.com/rockler-4-piece-digital-measuring-kit Crosscut Sled and Drop Off Platform - www.rockler.com/tablesaw-crosscut-sled-with-free-crosscut-sled-drop-off-platform-bdl Universal Fence Clamps - www.rockler.com/universal-fence-clamps Spring Loaded One Handed Bar Clamp - www.rockler.com/rockler-spring-loaded-one-handed-bar-clamps Festool TID 18V Impact Driver and T18 Drill/Driver 4.0Ah Combo Kit (576494) - www.rockler.com/festool-tid-18v-impact-driver-and-t18-drill-driver-4-0ah-combo-kit-576494-bdl Combination Square - www.rockler.com/igaging-12-combination-square XL Silicone Project Mat - www.rockler.com/rockler-silicone-project-mat-xl-23-x-30 Silicone Glue Brush Set for Dowel Joinery - www.rockler.com/rockler-silicone-glue-brush-set-for-dowel-joinery Hope that helps. Let us know if you have any other questions. Thanks!

[@kashsh4686]

@@rockler If i want a wider louvers (like 4"), is there any way to get measurements for that?

[@rockler]

Our jigs and design wizard are only made for 1-1/4", 2-1/2", or 3-1/2" louvers. Also, our control arms won't work if you make a different size louver. Sorry about that.

[@luishernanlofinlandia1950]

muy bien, felicidades. por favor dime como se llama y donde puedo comprar el accesorio de metal para que puedan girar las tablas? gracias

[@rockler]

Hello, you can find everything you need in our design wizard on our website. Item numbers will be included on the last page of the plans that it generates for you. Here is the link with more info. - www.rockler.com/learn/complete-shutter-system - Thanks!

[@helenjohnson7583]

Those are WAY cool!!

[@rockler]

We agree! Now you know that they are easy to make. Thanks for watching.

[@magicworldbyjorg]

,a cool video keep up the great content.. Thank you……

[@rockler]

Thanks! 💙

[@magicworldbyjorg]

@@rockler Thank you very mutch... have a nice Start of the week.... see you….

[@paulanascimento229]

👍🏼

[@hazellewis7821]

Cool

[@rockler]

Thanks! 🙌

[@luisbrazilva]

Can I just have many monies to own everything I just saw in this video? Lol

[@emilevoyer123]

THATS FOR THE VIDEO

[@rockler]

🙌💙

[@lloydchurch7099]

"promo sm" 🌸

[@maxievazquez4103]

Like me , excelen

[@rockler]

🙌

[@Bijou_248]

Great video!

[@rockler]

Thank you!