Awesome boat build! Thanks for allowing us to follow along Joe! I’m sure you will enjoy this one.
@jraymond1159 ай бұрын
Thanks Ritchie! We’re enjoying it!
@anthonykontos79318 ай бұрын
@@jraymond115so awesome they are close to my house this gives me so much excitement. Getting ready to get one bulit too once I convince my wife.
@ldeoutdoors852426 күн бұрын
Like the hull design!!!
@bricehale65938 күн бұрын
This is exactly the kind of work i want too do awesome work
@irod710 ай бұрын
Awesome video Joe can’t wait to book a trip.
@jraymond1159 ай бұрын
Sounds good. Thank you!
@RichardMckenzie-h2j9 ай бұрын
Thanks you for all of the info. On this boat,I really am thinking of buying one just like your boat. It is sweet build. Thanks
@jasonvenesky243810 ай бұрын
This is a great video. So well thought out. Thank you!
@jraymond1159 ай бұрын
Glad you enjoyed it
@nawinchester10 ай бұрын
Well done Joe! We look forward to fishing out of it! :-)
@jraymond1159 ай бұрын
Yes! Thank you!
@WHITERIVERRAMBO9 ай бұрын
Ive watched RockProoof from the time I was a novice boater to now being a seasoned boat builder. Theres are quite a few odd things ill never understand. From the use of 4" channel longitudnal stringers to the square gunnels. Im sure Hardox is a premium protection but not having lifting strakes or reverse chines prevents being nimbal & increases plowing through turns. Im mostly surprised by the lack of lid structure. its just weird to see straight 3/16 sheet hatches with no guttering or dry storage. I also didnt expect to see the shallow water exeption & no foam, but that all comes to an end in a few months with the new USCG regulations. love the end result, from the color scheme to the trailer. Im sure that 300 is a fun little unit. even comparing it to outboard weight, power, & cost its a clear winner. Id love to build a hull around one myself. God knows i wont be building another jet with a 460 again.
@FR-tm1fl9 ай бұрын
interesting. Wouldn't adding lifting strakes be pointless while the boat is on plane? I mean the bow is out of the water when on plane adding lifting strakes would increase stern height and lead to additional bow steer in turns. Reverse chine would be of little improvement. I could see a few strakes maybe T bar near the chine being added to resist lateral skid. Probably comes down to preference in handling. Do you have any videos of all the jet boat builds you have completed i would like to see how you have handled it.
@WHITERIVERRAMBO9 ай бұрын
@FR-tm1fl the jet boat I built was the first thing I built. It's 30episodes on my playlist & I did UHMW on 8⁰ & no reverse chines or lifting strakes.... I learned this lesson the hard way. With 550hp it still works but it's like driving a bath tub. The last 5 I've built have been slickbottom fan & outboard prop boats. Personally I feel like low speed craft mostly benefit from reverse chines. On aluminum boats those are usually only pointed down the back 8' of the boat. at higher speeds even a 7⁰ hull will have the chines leave the water so lifting strakes are more of an asset for bite at that point. Sometimes even a small hook 2' in front of the transom to keep it sucked down to the water. After my first build I dove hard into hydrodynamics & what makes drag jetboats turn. Obviously that's the complete opposite end of the spectrum. I build a lot of performance pods for outboard boats now. With a jet tunnel & a property powered boat pods can either increase turning bite or maintain a soft plow while only effecting a more level holeshot. I'm far from a professional in jets but keeping the nose down can be achieved with a ride plate however at that point it will begin to require more nozzle pitch......... just like anything with hydrodynamics it's all a give & take.
@bigboatben9 ай бұрын
Nice video, the boat looks great. If I was a rock, I would be scared!
@jeffreyriddle464510 ай бұрын
Sweet boat my friend ❤❤❤
@jraymond11510 ай бұрын
fujr… lol thanks bud. 😊 Yours is going to look pretty slick once you get that flooring installed
@fishingwithundercoverbaits930510 ай бұрын
Looks really good
@jraymond1159 ай бұрын
Thank you
@chrisdaniel13395 ай бұрын
What grade of aluminum did you use for the 1/4" rock plate on the hull. At 7:15 those are some damn fine aluminum welds for a boat, very impressive.
@steveelfers30807 ай бұрын
Great looking build!
@williambarnes127610 ай бұрын
Excellent design
@rvinogradoff10 ай бұрын
AWESOME!
@Mikenpa199510 ай бұрын
Looks awesome!!! Smart go on the mesh seats too, light easy to clean and comfortable. Did you sell the old boat yet????
@jraymond11510 ай бұрын
I like the seats so far. We’ll see how they hold up. I do have a little concern about the mesh breaking down over time. I sold my last jets boat in January.
@LeadUnleashed4 ай бұрын
Which seats did you go with and why? I like the jump seat setup. Total cost to build?
@mikehurtle6 ай бұрын
The 5 bottom forward stringer’s I would think should be instead of laying flat play some vertical that increases your support and then you cut the stringer as it moves forward to match the bottom profile and the stringer will come to a point, You don’t need that much support forward unless you do plan on plowing through and over lay downs but still there should still be more than enough support with five or even just for stringers laid vertically. But wow What a blast I’ve always wanted to design and build riverboats
@SmartLink-v9dАй бұрын
Butiful bot ....mantap😊
@hoofarted870910 ай бұрын
Did you look into the "jetboat kit set" by thomas hewitt for any ideas on your build?...if you havent then you should check out his channel and his shallow water river videos...keep on rocking bro!!!
@jraymond1159 ай бұрын
I’ll check it out. Thanks
@magnumsolutions8 ай бұрын
Very nice build, Joe. I really like the setup of the raised rod boxes. Have you found any rod holders to attach to the side of them to organize the rods instead of just setting them in the box and letting them bang around? Very functional and very well put together rig. That Rotac is quite the beast to have under lever in what is essentially a 19' rig. Nice job outfitting.
@ph00z0010 ай бұрын
great video. i want one with lessons learned too. the nose pinching welds seems a bit sketchy though. @42:50
@jraymond1159 ай бұрын
I’ll work on that. Nose pinching welds?
@glenncharnogursk664710 ай бұрын
Looks really nice. If you have Linex on your deck, does it need to be ground down for aquatraction?
@jraymond11510 ай бұрын
It would be best to remove the lineX first but I realize how big of a job that is and it’s not something we get into. I have installed Aqua Traction over the line X on quite a few boats and overall it’s been successful. It must be ordered with Double adhesive. There was one or two pieces that had issue but were fixed.
@nellliefrias3 ай бұрын
Hi looks great! But am i missing somthing.. no foam floatation in this boat?
@jeffsadik30735 ай бұрын
Basic question: why have a (relatively) lowered floor in the center of the boat? Seems like a single height elevated floor through the whole boat might have more advantages than disadvantages.
@juanmayorga6509 ай бұрын
Beautifull boat! you do very clean work. roughly how much does something like this cost?
@skdogg199 ай бұрын
60000-80000
@jessegregory44283 ай бұрын
@@skdogg19more than 80 for sure
@JoelSytsma6 ай бұрын
Do you have a link to the Springfield base and pedestal. I dont see the 1.77 on there website.
@ThomasShue6 ай бұрын
Total build cost before all the rigging? Then grand total of everything
@coreycorey22204 ай бұрын
Why is there no flotation added to the boat under the floor?
@kennylowe94044 ай бұрын
Why not use the water jet CNC to cut the holes instead of drilling?
@jraymond1154 ай бұрын
@@kennylowe9404 they do but the holes also need counter sunk
@CaptDavesSportfishing9 ай бұрын
So minn kota ripped off power pole? Guess it was inevitable Or was it they bought out power pole?
@jakejacobson29997 ай бұрын
I’m curious why not run 100 amp hour trolling motor batteries?
@CoosaRiverCharters4 ай бұрын
What was the turn around time for this build?
@jraymond1154 ай бұрын
From start of fabrication to delivery, it was around six weeks. I believe they are backed out a year on the build schedule.
@vizibug7 ай бұрын
what!?!?... no bimini??!... nice boat, built rite...
@LoganTate-ex9zs9 ай бұрын
how much money to do a boat like this in aqua traction?
@FR-tm1fl9 ай бұрын
4k+
@StevenScheffe8 ай бұрын
Where do we buy one?
@AK907BEAR8 ай бұрын
Will it hold a moose a bear and a caribou
@jraymond1157 ай бұрын
I wouldn’t want that in my boat but You could have one built for that.
@AnhPhamquoc-sy3fsk8 ай бұрын
Bao nhiêu tiền một chiếc xuồng hoàn thiện vậy
@kurts72687 ай бұрын
If this is video #6. Why is there no videos for 1-5?
@jraymond1157 ай бұрын
I didn’t film the first 5 builds
@AnhPhamquoc-sy3fsk8 ай бұрын
Thật là tuyệt vời người Việt Nam mình mở rộng tầm mắt