Just wanted to thank you 🙏 for showing me where the staples are supposed to be loaded in the stapler as I had not found anything in the instructions booklet on how to load the staples properly 😃
@toddkerestes5944 ай бұрын
Thank you for the instructional video. I just got one of these last week, i have a project of putting chicken wire onto a wood frame. Thought that would be easier to use pneumatic stapler...ill give it a try later on this week, but appreciate the tutorial.
@Soupy_loopy Жыл бұрын
I have one from a few years ago. Was working great for a lot of work, but it's starting to give me a hard time. I was thinking about getting an electric one, but I'm glad I watched some videos first. For the money, I'll probably just buy another one of these. It's like $38 at Lowe's. I think I bought the first one on Black Friday deal for maybe $20-30. But it's pretty good.
@ml96333 жыл бұрын
Bought one, your help was appreciated. Especially the note on couple drops of oil. Probably give me an extra few years because of that oil :) thanks, Maurice :)
@jciturr2 жыл бұрын
Thank you for showing how to load the staples!!
@scifisamnyc740411 ай бұрын
Concise and no BS! very helpful 👍
@locovidepro Жыл бұрын
Mr.Roger, I appreciate taking the time to do this very helpful review of this stapler gun. I am. looking to buy one and wasn't sure which one to get. Your video review helped me to decide on this one. Thank you so much and I will.subscribe to your channel. Sincerely -Jorge in Florida
@Liazon0982 жыл бұрын
Great demonstration. Amazing 🤩
@lennymarett1647 Жыл бұрын
Thanks Roger. Great content. Keep it up
@joewalton60568 ай бұрын
awesome video Roger!
@patriciababy642 жыл бұрын
Thanks for the demonstration. I was putting the staples in wrong! I was going to return it. Lol
@hermelindoperez9081 Жыл бұрын
Thank you so much for your tutorial.
@timshiel373210 ай бұрын
Now they are 50.00 on Amazon
@nastysoda92125 ай бұрын
can this use 1/2" wide 20 gauge staples? can't find that info anywhere on the box
@rogersshop4 ай бұрын
Can use any Arrow T50 staple
@nastysoda92124 ай бұрын
@@rogersshop that doesn't answer my questions. arrow t50 staples is some proprietary thing, what is the size length wise of t50? can I get T50 in 1/2" size? I don't mean length but wide, so that it would fit in the air stapler
@rogersshop4 ай бұрын
@@nastysoda9212 This stapler will handle 1/4" through 9/16" length staples and there is a 1/2" length available. arrowfastener.com/fastener-category/staple/t50/
@nastysoda92124 ай бұрын
@@rogersshop again, did not answer my question. Those are the LENGTHS of the staples, not how wide the top is. My upholstery staples are 20 gauge 1/2" wide but 1/4" deep. will this staples fit a 1/2" wide staple? I may be asking the wrong person.
@rogersshop4 ай бұрын
@@nastysoda9212 Crown size is 3/8". this is easily found. Google can be your friend...........
@henrysara7716 Жыл бұрын
Thank you Roger.
@Battery37 ай бұрын
Excellent video. Keep it up!❤
@Dave-jc6ky2 ай бұрын
Does this stapler have any type of depth adjustment or does it set depth automatically? Thanks!
@rogersshop2 ай бұрын
No depth adjustment
@Dave-jc6ky2 ай бұрын
@@rogersshop Ok thanks, I guess than the depth of penetration must be controlled to a degree by downward pressure on the gun, perhaps air pressure and type of material the staple is being used to fasten.
@Vee-d7s5 ай бұрын
It’s doubled in price since you posted 😞. Just bought it today for an upholstery job that the electric just wasn’t cutting it for. Wish me luck
@sonamkhan-qy5hf4 ай бұрын
Thanks for the demo. Do I have to buy the compressor
@rogersshop4 ай бұрын
An air compressor is necessary to use this.
@KathyBoase-p3s3 ай бұрын
Hello. I just bought one and the magazine won’t stay closed? Is there a trick or exchange it?
@Andrew-is7rs2 жыл бұрын
Anyone know if it’s got the reach to tuck in tight to a stair runner where the tread meets the riser, the 90° corner where we use a bolster chisel to get the carpet in tight, at all?
@rogersshop2 жыл бұрын
Iffy........A long nose upholstery stapler would be better suited.
@lepinediane37727 ай бұрын
Mes agrafes ne sortent pas et aucune de coincée, que faire. J’ai besoin d’aide. Elle a fonctionné une seule fois 🙁
@flawdanative32232 жыл бұрын
Wood have been great to see how it worked on the Hardwood that you mentioned. It's nice to know where the oil goes, and how to put the staples in, yada yada yada... but How Does the Tool Actually Perform?!
@rogersshop2 жыл бұрын
Have run several thousand staples through this since the video was made. NO problems.
@Freestyle-vs9fy Жыл бұрын
Great video
@lauriematson68362 жыл бұрын
Great video, thanks!
@michaelspain762110 ай бұрын
Don't remember you saying the settings for air pressure?
@rogersshop10 ай бұрын
My shop air runs at 80 psi
@glenda07282 жыл бұрын
I am a NOVICE at this. Do I have to have an air hose to operate it?
@rogersshop2 жыл бұрын
Yes, and an air compressor.
@glenda07282 жыл бұрын
@@rogersshop Thank you!
@tommyknockerparanormalinc3 жыл бұрын
I need to buy a hose, does the 3/8 crown mean I need a 3/8 hose?
@rogersshop3 жыл бұрын
No, you don't need a 3/8 hose as this uses very little air volume. A 1/4" hose would work, but a 3/8" would be better if you have other air tools.
@tommyknockerparanormalinc3 жыл бұрын
@@rogersshop I figured out what the problem was, I am such a noob. I saw you lifted the little nobby. I guess I had to do that to get it to attach to my stapler. duhhhhh Oh well, got it on now! woohooo
@lostinpa-dadenduro75552 жыл бұрын
3/8” crown refers to the width of the top part of the staple as measured left to right.
@bluegrassbodybuildingfitne4062 жыл бұрын
I just got a new one of these. Been this stapler for years. The new one I got is leaking air where the trigger is. I can’t figure out why. Any idea? Thanks
@rogersshop2 жыл бұрын
I've never taken one apart, but I suspect a bad or miss-aligned O ring.