Fusion 360 [TURN] for beginner’s

[@Nattroski]

Hi Roger, You may have noticed this already on F360, but it seems the fillet tool causes the post processor to have very strange issues, as soon as I switched it out to a chamfer all of my issues were resolved on mach3, once again thanks for this guide you've given me a good headstart to figuring this out! Best of luck! James

[@ed-exodus]

I can not tell you how useful this tutorial is when your learning fusion 360

[@jaimevillada9150]

Saludo desde Cali Colombia. Hoy se celebra en este país el día del padre, y quiero agradecerte por tener la paciencia y dedicación para enseñarnos a todos de manera clara, sencilla y puntual lo maravilloso que es el mundo del CNC. Bendiciones de salud.

[@mbike314]

Thank you so much for the information and wonderful tutorials over the years! My question for this video is how would you do a finishing pass on this part so you have a uniform cut at the end instead of intermittent rough passes as a finish?

[@rogerwebb9600]

Coming soon!

[@mbike314]

Looking forward to it! Cheers!

[@naisbyw3276]

Extremely helpful, thank you!

[@rogerwebb9600]

You're welcome!

[@Max_Ufc]

Love this guy ♥️😎

[@woodgrainnz]

I try all this and the part mach3 try to make it Double the size all setup was the same no idea what went wrong. Lol. nice job on video.

[@rogerwebb9600]

Hi, you need (diameter mode) in Mach3

[@joselemus2240]

Do you have Fusion 360 tutorial for cnc turning for beginners…. To start from scratch

[@frankske1958]

hi,great videos as always.are we gonna see the turning part off that piece in mach 3

[@rogerwebb9600]

Possibly!

[@fredp9708]

hi Roger, do ou use the free version of fusion 360? because in mine i don't have any option to transfer in g-code Do ou have a link to download your version? Thank's Fred

[@Nattroski]

I'd really appreciate it if you could do the mach 3 /turning steps for this so we could go through it!

[@megaDigit4l]

how you set tool this side of the parts for stranad cinverted lathe

[@fredmartinez933]

nice tutorial..

[@rogerwebb9600]

Many thanks Fred.

[@crazytrutas]

A happy little chamfer........ Bob Ross?!