Fusion 360 - CAM Turning 101 - Ask LarsLive

CAM Turning 101 is a snippet of Sunday's Ask LarsLive. You Can watch the full episode here:
• Ask LarsLive Fusion 36...
(The advice in my videos are my own and are not intended to represent the views of my wife, children or employer)
My email:
[e-mail]
Want to learn more about Fusion 360? Check out this link:
autode.sk/2rXApL2
Free CNC Handbook:
www.larschristensen.org/free-...
LET'S CONNECT:
/ lars_cadcam
/ mrlarschristensen
/ cadcamstuff
MY SITE:
www.larschristensen.org/

[@leebaldwin677]

I have a quick question re turning. I've got a job that has a 50mm spherical bore using a 8mm button tool it's pre drilled with a 15mm drill. But I'm struggling with a pip tools on centre line. It works on nx but not on fusion any tips would be welcome.

[@dineshgajbhiye191]

Lars, will make slotting operation on cam ??

[@controlnumericomexico2778]

Lars!!! What are you printing behind you??

[@d.c3363]

I am using Fusion 360 and need a post processor for mach 3. Is it possible to add this to the list of post processors available. The only internet access I have is through a mac computer and I can not open the download. Will fusion 360 be adding a processor for mach3 turn as it seems a lot of people are struggling. PS absolutely love your channel, clear and easy to understand. Keep it up please.

[@cadcamstuff]

Google Autodesk Post Processor library and you should find one

[@airgunningyup]

same issue , f360 doesnt seem to work well in either diameter or radius mode.. it travels to far in one direction either way

[@TysonLabbe]

I have a turning project that constantly stumps me. Any chance you can take a peak? Just trying to skim cut the face profile of a solid stock.

[@davidcox692]

Lars I have just set up my lathe which runs mach 3 can I use fusion turn with it ? why can't you live next door bud

[@palmerinsull2455]

Hey Lars, I'm getting the warning message "Warning: Cannot Plunge Outside of Stock" during a 2D pocket operation, I can't seem to figure out why or find any information on that the error message entails. Any advice would be much appreciated!

[@furkan6200]

hello doosan puma 2100 mb i am making a fusion 360 cam but it sends g code to y do you have any idea there is no y axis

[@petermenningen338]

Will mill turn work on a Tormach 440 with small parts held in the spindle?

[@miguelzambranojr]

Check mill as a lathe using G52 from Jonh. He modify a Tormach post

[@arindammajumder5957]

How G1G2 option in fusion 360 generate G code please reply

[@ravishmaliakkal]

My turn mill lathe showing illegal plane while program run in 2d contour