Roland TD-17KVX Setup Guide

For my fellow music teachers or drummers who may have received a Roland TD-17KVX, this video will provide a visual guide on how to successfully setup your kit!
Looking for an electronic kit and like the TD-17? Get it here - amzn.to/35DUxph
Thanks for watching! Check out the other links below:
Roland Drums - www.roland.com/global/categor...
My Official Website:
www.nickcostamusic.com
Follow me on Instagram:
/ practicallynick
Follow me on Twitter:
/ practicallynick
Like my page on Facebook:
/ nickcostadrums
Music by St. Brendan (Easy) - open.spotify.com/album/1gnPxy...
#electronicdrums #rolandvdrums #rolandtd17setup #electronicdrumsetup #drumsetup #rolandtd17

[@joshtarpley3183]

Honestly, I would not have been able to put the kit together without your video (the provided instructions were so unhelpful). Thank you thank you thank you!

[@NickCostaMusic]

I really appreciate that, thank you! Glad this helped you assemble the kit. Reach out if you ever have any questions - enjoy! ✌️ 🥁

[@phartzabit]

Same here ! Thanks

[@XXjg_]

FYI: That Bass Drum Beater is two-sided, felt and plastic. Felt beaters are NOT recommended for mesh drum heads as the felt can snag and eventually tear the mesh. Rotating the beater to use the plastic side will lengthen the life of the mesh head. Plastic or wood beaters are best with mesh-head electronic drums. With drumsticks, make sure you only use a dedicated set, not some that have already been used on an acoustic set, as those might have chips and dings in them from metal rim shots. Those chips and dings can also snag and tear the rubber and mesh parts of the electronic kit. Though undamaged wood-tipped drumsticks are okay, nylon-tipped are preferred.

[@NickCostaMusic]

Others have mentioned this as well - appreciate the reminder!

[@jakobh6257]

Great info

[@brandonroberts8008]

Definitely an IYKYK item. Great addition to a great video!

[@dansantospirito5310]

Many thanks. About to buy one of these, so good tip to have!

[@erickr.c.guiitar3974]

Thank you sir!!! You just save me from all these mistakes !!! I really appreciate it. 😁

[@paranoma87]

I watched this video a week ago, got my set yesterday and began assembling today. Thought I’d use the instruction booklet just in case he missed something. Got about 2 instructions in, bewildered by the tiny and grainy photos, and busted this video out. Soooo much easier. Thanks for the video. Btw, this kit sounds great!!!

[@NickCostaMusic]

That’s so rad to hear, Mike! Glad it helped you get the kit together - hope you’re enjoying it so far. Appreciate you checking out the vid - enjoy the kit!

[@CrazyHenkie777]

Same here! Thnx for the vid.

[@NickCostaMusic]

@@CrazyHenkie777 you’re very welcome! Appreciate ya checking out the vid

[@iSturg]

This was my exact experience. The booklet is slightly confusing and has few helpful diagrams. This video was incredibly helpful.

[@NickCostaMusic]

@@iSturg The instructions can be overwhelming for sure. Great to hear this helped ya out!

[@flex-ranger2]

Hi Nick, just bought my kit yesterday and wanted to personally thank you for uploading this video as the instructions provided were horrible. i was able to follow this easily and with confidence. So THANK YOU ❤️

[@NickCostaMusic]

Great to hear, happy to help! Thank YOU for checking out the vid. Enjoy the kit, and have fun!

[@gerryjalove]

Thank you, Nick...you are the man! Also, for taking the 34 minutes plus out of your day to share this info with us...you're the best!

[@NickCostaMusic]

Many thanks, Gerry! Glad it helped and happy to help. Thanks for checking out the vid!

[@winip9261]

Let me add myself to the list of people thanking you for this video. It would have taken me forever without your help. Excellent, excellent instructional video.

[@NickCostaMusic]

You’re very welcome! Great to hear it helped you get the kit together. Appreciate you checking out the vid, and enjoy the kit!

[@bill40409]

Your guide saved my son and I a ton of time today, Christmas day. Thank you very much!

[@NickCostaMusic]

You're very welcome, Bill! What a great kit to get on Christmas - enjoy 🙏🏼 🥁

[@nijmegen1975]

This saved me so much time setting up the kit....way clearer than the directions in the box....thanks! 👍

[@NickCostaMusic]

Great to hear - glad it helped. Thanks for checking out the vid, and enjoy the kit!

[@markdiamond1288]

Thank you so much for taking the time to show how to put this drum set together. It would have taken me probably another hour or more to complete using the instructions that came with the drum set.

[@NickCostaMusic]

You're very welcome! That's exactly why I made this video - as a visual learner myself, I realized setting this up wasn't as complicated as I originally thought looking at the instructions. What do you like about your TD-17KVX so far?

[@MELINADRUMS]

Three years later… thank you SO SO much for this, a lifesaver, you’re awesome! This was so helpful. ☺️🤘🏼

[@NickCostaMusic]

You’re very welcome, glad it helped! Thank you for checking out the vid and if you have any questions on anything drum set related, please don’t hesitate to reach out. I’ll try to help in anyway I can 🥁

[@ianwillis5292]

Wow, this made the assembly super quick and easy. Thank you much sir! Solid.

[@NickCostaMusic]

Glad it helped! Enjoy the kit, and appreciate you checking out the vid!

[@JelmoNL]

I have set up this kit yesterday with this video on my tablet. Now I came back to this video today to leave this comment, because it deserves a big thank you! Thanks for the time it took to make, it’s a very good step by step and clear help.

[@NickCostaMusic]

Killer, Jelmer! Glad this helped you assemble your TD-17kvx. Have you had a chance to play it and if so, what do you like about it so far?

[@markusthedrummer8143]

I'm a long time drummer and I benefited from watching this, thank you for saving me tons of time

[@NickCostaMusic]

You're very welcome! Great to hear it helped you. Thanks for checking out the vid.

[@patrickwade757]

This is exactly what i was looking for. thank you so much!

[@NickCostaMusic]

Glad it was helpful, and you're very welcome! Enjoy the kit, and thanks for checking out the vid.

[@berndfri]

This video was simply brilliant! Thank you so much for answering so many questions the manual did not.

[@NickCostaMusic]

You're very welcome! Great to hear this helped you assemble your kit. Appreciate the support, and for checking out the video 🥁🙏🏻

[@yelltempus]

Oh man, I'm visually impaired & have been trying to set one of there kits for over a month. THANK YOU! You've been a huge help.

[@NickCostaMusic]

Well there ya go! Glad to see this helped, and enjoy the kit!

[@briancoyne6700]

Thank you, Nick. This was 100X easier than reading that damn manual. Thank you!

[@NickCostaMusic]

You're very welcome! I'm glad the vid helped ya out. Did you get a chance to play the kit yet - what are some of your favorite features?

[@BBFKTECH]

Thanks for this video!! The instructions that come with the kit aren’t that easy to decipher. You saved me a lot of time with this tutorial. Thank you so much!!! 🙏🙏

[@NickCostaMusic]

That's great to hear, glad it helped you with assembly. Thanks for checking out the video, and enjoy the kit!

[@sarahc7119]

Thank you that was so helpful. I readjusted my kit and it’s made it much more comfy to play. Brilliant!

[@NickCostaMusic]

You're very welcome! Glad to hear it helped. Thanks for checking out the vid.

[@vanceegan]

EXCELLENT guide... helped me a TON!!

[@NickCostaMusic]

Awesome - so glad to hear it helped you out!!! Enjoy the kit, it’s a great one

[@bhaveshsolanki6485]

Thank you Nick, just got the kit delivered to me about an hour ago, and I was dreading having to set up the rack 😫 but thanks to your video, you have made it look a lot more easier!

[@NickCostaMusic]

That's awesome! So happy to hear this video helped ya out, and that you got a killer new e-kit. Appreciate you checking out the video, and enjoy the kit.

[@adamdavidson3046]

Thanks for making this video, it was SO much easier to follow than the printer instructions. I got my kit setup in about 2.5 hours, the first 30 mins was using the paper version before I went to KZbin. I only made one mistake and got the HH and HHC leads the wrong way around but after that I was drumming! It really is a great kit. I've only played acoustic kits before and I'm amazed at how good electronic kits are these days. Time to teach my kids to play. Thanks again.

[@NickCostaMusic]

Awesome - glad it helped! This kit is great to hash out new ideas. My students really liked how you could customize the kit with different drum sounds, tunings, and loved the built in teaching tools. Best part - the Bluetooth connectivity for their phones! Thanks for checking out the vid - and enjoy!

[@ShaneWhaley]

Wow, this video is a lifesaver!!! I dont think I could have put this kit together without it. I am new to drums so I am looking forward to digging into your content! Thanks again!

[@NickCostaMusic]

That's fantastic to hear, Shane - both that this vid helped you, but more importantly that you're getting started with the drums! If you ever need anything, never hesitate to reach out to me on my website and I'll try to help in anyway that I can. NickCostaMusic.com

[@germanviewpoint]

This is one of the best and most useful videos on KZbin!!! It helped me a lot and saved me a lot of time and frustration!! Thank you sooo much and may God bless you!!

[@NickCostaMusic]

Many thanks! Great to hear it helped you assemble your kit - enjoy 🥁

[@fragglr678]

This was so helpful and easy to follow. Thanks a bunch 👏🏻

[@NickCostaMusic]

You're very welcome. Great to hear this was helpful and easy to follow - enjoy the kit!

[@artnelsoncreative]

I can’t thank you enough for doing this video. I would’ve never been able to put it together by just looking at the printed instructions. I see that you are a music teacher. I bet you’re great at what you do. Thanks again.

[@NickCostaMusic]

You're very welcome @artnelsoncreative ! So happy to hear this helped you assemble your kit, and thank you for the kind words. I really appreciate the positive feedback, especially when it comes to my teaching - THANK YOU🙏🏻🥁

[@gianluigidautilia6417]

whitout this tutorial i would have been lost only look at the horrible paper included i would have returned it!! this was gold!

[@Surge_LaChance]

Thank you for producing and uploading this! I have one of these kits on the way and your video is already very helpful. I give you an A+. 🙂

[@NickCostaMusic]

Great to hear, Surge! Thanks for checking out the vid, and enjoy your kit!

[@catmlr]

Thank you so much for this really useful video, I would not have been able to assemble the drum kit without it. You saved me a lot of frustration and time. Really grateful!

[@NickCostaMusic]

Happy to hear it helped! Enjoy the kit, and thanks for watching

[@DustinTV8]

Can't thank you enough for this, helped me out massively!

[@NickCostaMusic]

Great to hear - glad it helped out! Thanks for checking out the video.

[@johnnybalb]

This video was incredible helpful. I was so overwhelmed when opening the box and it felt like nothing was labeled. Following each step was very easy. Highly recommend this video.

[@NickCostaMusic]

Totally understand the overwhelming feeling opening this thing up. The excitement turns to fear real quick! Thank you for the kind words, and happy to hear it helped you assemble your kit!

[@josephbeckett2868]

Thank you very much for this. I just picked up a 2nd hand TD17kv and your video helped me get all setup correctly. Cheers to you.

[@NickCostaMusic]

Fantastic! Glad this could help - sometimes these kits get setup kinda funny 😅

[@srinivaskovuri6858]

Amazing clarity, you made my td17kvx setup so easy

[@NickCostaMusic]

So great to hear! Glad this video helped. Thanks for checking out the video, and enjoy the kit!!

[@sydneydonovan8694]

You are a life saver, i was struggling with the directions.

[@NickCostaMusic]

So glad to hear this helped! Enjoy the kit, and thanks for checking out the vid.

[@jeffcampbell6298]

Spin your bass beater around to where the plastic is hitting the base trigger instead of the felt. I read somewhere that the felt is bad for the mesh head.

[@ZmannR2]

This is VERY true....Rolands actual kick hammer is just solid plastic

[@msl2796]

But this model does not have the mesh head.

[@Varocka]

@@msl2796 except it does, the KD10 is a felt//cloth mesh pad.

[@ButchHudson]

static.roland.com/assets/media/pdf/TD-17KV_V2_eng01_W.pdf ROLAND says: A variety of commercially available beaters can be used, including felt, plastic, or wood types. However if a felt beater is used, the felt may leave marks on the striking surface.

[@BlisterBang]

I've always heard that, too. But after 5 years it hasn't made a difference on either kit I play on. Maybe there's more to it than the generic "felt" issue?

[@wkdpsin]

Best step by step setup vid. This saved me today when i got my new kit home. Thanks heaps! 😀

[@NickCostaMusic]

Great to hear it helped! Thanks for checking out the vid, and enjoy the kit.

[@michaelk8642]

Thanks for the highly detailed video regarding putting this kit together. I was looking on the Roland YT site for a video like this and couldn't find anything except for all other kits besides this one. Because of you, I now have a reference to a step by step guide on how to put this kit together. As mentioned, thanks a bunch!

[@NickCostaMusic]

Fantastic, Michael! So happy to hear you were able to find the vid, and it helped you assemble your kit. Appreciate the kind words, and enjoy the kit 🙏🥁

[@patked-music]

Many thanks for this video. I managed to mount the TD17KVX in <a href="#" class="seekto" data-time="90">1:30</a>. If I had done it with the ROLAND documentation, I think I would have spent the whole weekend there, and again 🙂 I'm new to drums (I'm a guitarist) and I'm going to study all your rhythm demonstrations. Well done and thank you again Patked

[@NickCostaMusic]

Right on! Great to hear the video helped ya assemble your kit. If you need any resources feel free to reach out. Happy to help in any way that I can!

[@michelkant]

100% 😁! Thanks for this. So much easier than the guides that came with it. They should link to your video in the books 😅

[@NickCostaMusic]

Roland is more than welcome to do so! Great to hear this video helped you assemble your kit - enjoy. 🥁

[@XuanVienDo]

Amazing video. Very helpful. Thanks !

[@NickCostaMusic]

You’re very welcome! Great to hear this helped you assemble your kit - enjoy 🙏🏼 🥁

[@Smokeys911]

I just bought this kit. This video was VERY helpful. Thank you. Great job

[@NickCostaMusic]

Great to hear. Glad the video helped you assemble your kit!

[@dougcarson5202]

Very good, step-by-step guide to setting up this kit. Don't know what I would have done without it, since the directions that came the kit were quite weak. Just one suggestion to clarify the set-up even further. In order to get my right leg to fit between the snare and third tom, I had to angle the kick drum slightly to right of center of the line of the posts of the frame. I previously had assumed the kick drum should be centered with the line of the posts of the frame, which caused the leg interference with the snare. The way I figured out that Nick had actually done this was by doing a freeze-frame of the set-up of the kick drum from behind the kit. I then spotted that had actually done this.

[@NickCostaMusic]

Thanks, Doug! Great to hear this had helped you setup the kit. Thanks for checking out the vid, and enjoy the kit!

[@irisathena3916]

I'm getting this kit in a week's time, so this was extremely extremely helpful. I am terrible with manuals 🤣

[@NickCostaMusic]

Perfect - this should help ya get it together in no time!!

[@1200lightyears]

This was a true time saver, thank you so much for this!

[@NickCostaMusic]

You’re very welcome! Happy to hear this helped you assemble your TD-17. Appreciate the comment - enjoy the kit 🙏🏼 🥁

[@HannahCursaro]

You sir, are amazing!!! I’m so thankful you made this video, it was so much easier to follow along then trying to decipher the small instructions!! Thumbs up!! 👍👍👍

[@NickCostaMusic]

So great to hear this video helped! Appreciate you checking out the vid, and enjoy the kit.

[@Markroyale]

What a great guy! You nailed this: nicely paced, sufficiently detailed and most welcome! Thanks a lot 👍

[@NickCostaMusic]

Wow - thank you, Mark! I really appreciate the kind words. Thanks for checking out the vid, and enjoy your kit!

[@Sigma100_]

Dude this video was the move. I set up so much easier. Excelente!! Much appreciated. New subscriber.

[@NickCostaMusic]

Many thanks for the kind words, and appreciate the sub! Thanks for checking out the vid, and enjoy the kit.

[@812cp]

I'm thinking by buying one of these kits and watched this to see how it all comes together. I don't know what's more impressive here: the quality of the instruction, or the fact that you assembled that whole kit with one hand!

[@NickCostaMusic]

Lol - I appreciate it! Definitely will use a tripod and 2 hands next time.

[@violamaria1180]

Thanks so much, I could follow every step and it was so much easier than going through the description!

[@NickCostaMusic]

You’re welcome, Viola! Great to hear the video helped. Thanks for checking out the vid, and enjoy the kit!

[@GBCCSMusic]

Fantastic tutorial - really thorough, fast enough to keep things moving but not so fast that I had to pause a million times, and everything was explained exceptionally well. Great work, thanks so much for the extremely helpful video!

[@NickCostaMusic]

You're very welcome, Wil! I appreciate the kind words, and happy to hear this helped you get your kit together. Enjoy it, and if you have any questions please don't hesitate to reach out. I'll try to help as best as I can.

[@jray8704]

Came with goofy directions out the many 📦. Thx for your clarity and context!

[@NickCostaMusic]

Soooooo many pages - it can be overwhelming. Great to hear it helped, enjoy the kit!

[@sflanagan514]

Wow thank you so much! All assembled can’t wait to play thank you!!

[@NickCostaMusic]

You’re very welcome! Thank you for checking the vid, and enjoy the kit 🙏🏼 🥁

[@frankwinkler9856]

Hi Nick, watched this before I bought the kit. I am probably one out of ten guys in the world who look at instruction manuals to set up an electronic device. When I looked at these ones delivered with the kit I thought, this will be "fun". Well, I remembered your video, and thanks to it, it was easy to setup the drumkit. One of the best instructional videos I have come across. Thanks a million. Greetings from Spain.

[@NickCostaMusic]

Comments like this are the reason why I made the vid. So great to hear this made the assembly easy. Enjoy the kit! 🥁

[@michaelsinanis3022]

dude you rock...! just got my TD-17 KVX and I was going to pay some banana head from Guitar Center to set it all up, thanks to you, im good now.... great video my man!!

[@NickCostaMusic]

Rad! Happy to hear it helped ya out. Enjoy the kit, and thanks for checking out the vid!

[@paulwyld6105]

So funny

[@jerzyflix]

Thank you. This was a perfect setup video - right up to the hi hat part! I have the KV not KVX kit & one major difference is the hi hat - any easy tips to set that one up??

[@NickCostaMusic]

With the KV make sure you leave an extra clamp to the left of your crash cymbal. Use the shorter arm, and have it come inwards towards you, then flatten the ball joint. That will keep the arm out of the way of your leg. Place the foot pedal directly underneath, follow connect the HH cable to the cymbal, and the HHC to the pedal. Enjoy!

[@smh-drumming3813]

Thank you! Helped me a lot!

[@NickCostaMusic]

You’re very welcome! Appreciate you checking out the vid, and enjoy the kit!

[@markl.8479]

This vid was seriously integral for an easy setup last night. Thank you SO much!

[@NickCostaMusic]

That was the concept behind the video - so great to hear that’s how you viewed it. Appreciate you checking out the vid, and enjoy the kit!

[@Thomas19891]

They should put a QR-code on the boxes with this video linked to it!! Thank you so much!

[@NickCostaMusic]

I'd allow it if Roland wanted to. Appreciate the kind words - enjoy the kit!

[@louis-philippedenis5336]

Thank you so much for the video...the setup was so much easier. THANKS!

[@NickCostaMusic]

You’re very welcome! Glad to hear this helped you assemble your kit - enjoy 🥁

[@jenniferyard6474]

This made setup so much easier, the included instructions were pretty tough to decipher. Thank you for this video!

[@NickCostaMusic]

You’re very welcome! Great to hear it helped you out with assembling your kit. Thanks for viewing and Enjoy the kit!

[@lividusmusic]

That was so awesome! Very detailed and simple to follow. Thanks for helping me out

[@NickCostaMusic]

You're very welcome! Great to hear this helped you out - enjoy the kit🥁

[@familylifecenter-sheridanw5701]

Thank you so much - so helpful

[@NickCostaMusic]

You’re very welcome! So happy to hear this helped you assemble your kit. Enjoy! 🥁 🥁

[@reubenk7331]

Fantastic, no fluff, straight to the point. This was concise but not dry. Thanks a lot for this detailed instructional video.

[@NickCostaMusic]

You're very welcome! Appreciate the kind words - enjoy the kit.

[@billchampion1574]

You sir are awesome! Well done!

[@NickCostaMusic]

Thank you kindly! Enjoy the kit

[@crimsondawn1219]

Thank you man extremely helpful and straight to the point. Made my life ten times easier!

[@NickCostaMusic]

Great to hear - enjoy the kit, and thanks for checking out the vid!

[@dytyzerpud]

Amazing! Helpful!

[@NickCostaMusic]

Great to hear! Thanks for checking out the vid, and enjoy the kit!

[@MsWigglesWiggles]

Thank you for this helpful video!

[@NickCostaMusic]

You’re very welcome. Glad to hear it was helpful with setting up your Roland kit. Enjoy!

[@SurfboardMagazinePR]

The Best video I seen in THIS matter for the ROLLANDTD17KVX

[@NickCostaMusic]

Thank you! Appreciate the kind words, and glad to hear it helped you. Enjoy the kit!

[@johncardos2975]

This video really helped me out, very well explained, thank you very much!

[@NickCostaMusic]

You're very welcome! Enjoy the kit

[@Abe71000]

This video made setting up my set a breeze, Thanks!

[@NickCostaMusic]

You’re very welcome! Thanks for checking the video out, and enjoy the kit!

[@Keis73]

Your video made the setup so much easier and time efficient: I appreciate the help! Take care!

[@NickCostaMusic]

Fantastic! Happy to hear this helped you get your kit up and running. Appreciate you checking out the video, and enjoy the kit!

[@missy-zephyr]

Thanks for the video. It really helped.

[@NickCostaMusic]

Glad to hear it @missy-zephyr ! Enjoy the kit 🥁

[@keithhaldane9794]

Brilliant video! I am thinking of getting one of these and it was great to get a complete overview of the setup. Thank you!

[@NickCostaMusic]

Awesome! It's a great kit to have - has plenty of options to customize sound(s), and a few tools to help you improve your craft. Appreciate you checking out the video!

[@IceyXXI]

Thanks you for this, my church got this recently and this video helped us set it up without any issues !

[@NickCostaMusic]

Very cool! Where’s your church located? Glad the vid helped, and enjoy the kit!

[@Mr.C573]

Thank I just purchased my first Roland DT-17. Thank you

[@NickCostaMusic]

You're very welcome, Ray! The TD-17 is a great e kit with a good amount of features. Enjoy the kit, and thank you for checking out the vid!

[@DanstykMusic]

Super helpful - thanks!

[@NickCostaMusic]

Glad it was helpful. Appreciate you checking out the vid - enjoy the kit! 🥁🥁

[@braedenmatson]

You are an amazing human! Thank you.

[@NickCostaMusic]

Much appreciated, Braeden - and you're very welcome! Thanks for checking out the vid, and happy new year.

[@storminsea]

Thanks so much. This was a major help with setting the kit up👍🥁. Roland should be grateful to you!!

[@NickCostaMusic]

Great to hear it helped! Thanks for checking out the video, and enjoy the kit.

[@jerrycambria3630]

Great video NIck. Very thorough and logically explained each step.and you did it with one hand! Thanks. Looking forward to a video about programming the module.

[@NickCostaMusic]

Much appreciated - thanks, Jerry! I haven't thought about a programming video, but would consider it if enough people were interested 👍🏼

[@bronrayner6280]

A very informative and helpful video. Thank you

[@NickCostaMusic]

Glad it was helpful! Appreciate you checking out the video - enjoy the kit 🥁

[@Phil671]

Thank you, very helpful, i receive it this afternoon, 2 hours later it was set !!

[@NickCostaMusic]

Great! Instructions made my 🤯. Glad this helped, and enjoy the kit!

[@AntonKronseder]

Dear Nick, Thanks alot. Your video made the setup so much easier! Thank you for this video!

[@NickCostaMusic]

You're welcome! Great to hear this helped you get the kit together. Enjoy the kit!

[@ServantofJesus247]

Thanks for your videos.

[@NickCostaMusic]

You’re very welcome - thank you for watching them! 🙏🏼

[@uria702]

Just got my kit yesterday and this was helpful for the setup. Thanks for uploading.

[@NickCostaMusic]

Killer! Happy to hear this vid helped you assemble your kit. Appreciate you checking out the video - enjoy!

[@franciscosolorzano387]

thank you so much for this!!

[@NickCostaMusic]

You’re very welcome! Happy to hear this helped you, and I appreciate you checking out the vid.

[@miguel_franca]

Super helpful! Thanks man!

[@NickCostaMusic]

Glad it helped! Thanks for checking out the vid, and enjoy the kit 🥁

[@amisayag]

Great guide! Thank you so much.

[@NickCostaMusic]

Glad it was helpful! Enjoy the kit

[@slingnasty]

I believe you might have already heard this a time or two but, thank you so much for creating this video. It was super easy to follow and I didn't have any pieces left over at the end. Big thanks!!

[@NickCostaMusic]

You’re very welcome, Jeff! Always appreciate hearing from others the vid helped them assemble their kit. Dig your Costa hat in your profile pic, too!

[@BBQFLY81]

Super helpful video man! Thank you so much! You saved me a TON of time!!!

[@NickCostaMusic]

That was the goal - glad it helped! Enjoy the kit 🥁

[@VirtualCodeCrafter]

Wowsers!! Super helpful! Incredibly clear. My 8yo and I followed this video to setup our new TD-17. Thank you so much for putting this together and not skipping anything :)

[@NickCostaMusic]

You're very welcome! Great to hear this helped you two assemble your kit without missing a beat. Enjoy!

[@Gutines]

Thank you very much for the video!

[@NickCostaMusic]

You are welcome! Glad it was helpful - enjoy the kit 🙏🏼 🥁

[@juale]

I did it today !!! You are a genius. Thank you so much!

[@NickCostaMusic]

Yooo - congrats! I didn't do anything, that's all you Juan. Enjoy the kit!

[@ruthturner2695]

Thanks for the video, it was helpful.

[@NickCostaMusic]

You're very welcome! Thanks for checking out the vid, enjoy the kit, and let's go flyers!

[@ThePlanarchist]

Thanks, very useful, much appreciated.

[@NickCostaMusic]

You're welcome @theplanarchist ! Great to hear this helped you out - enjoy the kit!

[@ShawnMcClureModeler]

Great information. Thank you very much.

[@NickCostaMusic]

You're very welcome!

[@jakobh6257]

Very helpful, thank you

[@NickCostaMusic]

No problem Jakob! Glad this helped you assemble your kit - enjoy 🥁

[@brendaromans4734]

Thank you Nick! I'm new to V drums and was struggling to understand the instructions for the used kit I just bought. This was just the right pace and gave me all the information I needed. I just have to work out what's comfortable now :-)

[@NickCostaMusic]

Excellent! Glad it helped ya get the kit setup. Just like an acoustic kit sit with the proper height, and place the components of the kit where it's natural for you to reach/hit. You got this!

[@Haaayyyboo]

Thanks for this video! It made things so much easier!

[@NickCostaMusic]

Great to hear! Glad it helped you set the kit up. Thanks for checking out the vid, and enjoy the kit!

[@bsmalls17]

This was such a HUGE help !!! Thank you !!

[@NickCostaMusic]

You're very welcome! Happy to hear this helped you assemble your kit - appreciate you checking out the vid, and happy playing!

[@lisajlandone1913]

You are a life saver thank you!

[@NickCostaMusic]

You’re very welcome, Lisa! Happy to hear this helped - and enjoy the kit 🥁

[@31186dan]

Nicely done! Thanks for the help.

[@NickCostaMusic]

You're very welcome. Glad it helped, and enjoy the kit! 🙏🥁